無線通信
無線エンジニアリング チームは、MATLAB® および Simulink® を使用して、開発時間の短縮、設計上の問題の早期解決、解析、テスト、および検証の合理化を図ることができます。これらのツールを使用して、以下を行うことができます。
アルゴリズムとシステム設計のコンセプトをシミュレーションと無線信号で証明する。
汎用無線通信システムおよび規格に準拠したさまざまなシステムの適合性を検証するためのカスタマイズ可能な波形を生成する。
エンドツーエンドの通信システムのシミュレーションを実行する。
マルチノード ネットワークを表現するシステムレベルのシミュレーションの通信システム モデルを開発する。
デジタル、RF、アンテナ素子を用いたモデルを作成して、システム動作の探索および最適化を行う。
プロトタイピングおよび実装用の HDL コードまたは C コードを、手動でコーディングすることなく自動生成する。
無線設計、プロトタイプ、実装の反復検証用に再利用可能なゴールデン リファレンス モデルを作成する。
無線通信 向け製品
Communications Toolbox
通信システムの物理レイヤーの設計、シミュレーション、および解析
Wireless Network Toolbox
Model, simulate, analyze, and visualize wireless communication networks
5G Toolbox
5G 通信システムおよび 5G-Advanced 通信システムのシミュレーション、解析、テスト
LTE Toolbox
Simulate, analyze, and test the physical layer of LTE and LTE-Advanced wireless communications systems
WLAN Toolbox
Simulate, analyze, and test WLAN communications systems
Bluetooth Toolbox
Simulate, analyze, and test Bluetooth communications systems
Satellite Communications Toolbox
衛星通信システムとリンクのシミュレーション、解析、テスト
Wireless Testbench
Test wideband wireless systems and perform spectrum monitoring
Wireless HDL Toolbox
Design and implement wireless communications subsystems for FPGAs, ASICs, and SoCs
トピック
波形生成
- 無線波形発生器アプリを使用した波形の作成 (Communications Toolbox)
変調された波形の作成、劣化、可視化、およびエクスポートを行います。 - GPS 波形生成 (Satellite Communications Toolbox)
複雑なベースバンドGPS波形を生成します。
AI による受信機アルゴリズムのトレーニング
- 5G チャネル推定用の深層学習データの合成 (5G Toolbox)
5G Toolbox™ を使用し、チャネル推定用に深層学習の学習データを生成する。 - OFDM Autoencoder for Wireless Communications (Communications Toolbox)
Model a link-level orthogonal frequency division modulation (OFDM) communications system with an autoencoder to reliably transmit information bits over a wireless channel. (R2023a 以降)
RF 伝播およびチャネルのモデル化
- RF 伝播と可視化 (Communications Toolbox)
屋外環境と屋内環境のカバレッジ マップ、SINR マップ、および伝播パスの可視化。 - WLAN Channel Models (WLAN Toolbox)
Using WLAN channel models to add channel impairments to WLAN transmissions. - Propagation Channel Models (LTE Toolbox)
Describes the implementation of channel models specified by the LTE standard and corresponding functions in the LTE Toolbox™ product. - CDL チャネル モデル特性の可視化 (5G Toolbox)
CDL チャネル特性を可視化し、アンテナ素子、素子パターン、クラスター パスに関するチャネル情報を調査する。 - 陸上移動衛星チャネルのシミュレーションと可視化 (Satellite Communications Toolbox)
2 状態半マルコフ連鎖 LMS チャネルをモデル化して可視化します。
MIMO システムにおけるビームフォーミングとビーム掃引
- 802.11ad Waveform Generation with Beamforming (WLAN Toolbox)
Beamform an IEEE® 802.11ad™ waveform with a phased array. - Massive MIMO ハイブリッド ビームフォーミング (Communications Toolbox)
マルチユーザー システムとシングルユーザー システムの両方の手法を使用して、Massive MIMO 通信システムの送信端でハイブリッド ビームフォーミングを観察する。 - NR SSB のビーム スイーピング (5G Toolbox)
gNB と UE でビーム スイーピングを使用し、初期アクセス時のビーム管理手続きについて学ぶ。
トランシーバーの設計とシミュレーション
- パワー アンプの特徴付け (Communications Toolbox)
NXP Airfast PA の測定された入力信号と出力信号を使用して、パワー アンプを特徴付ける。 - RF 劣化要因を考慮した 5G NR ダウンリンク波形の EVM の測定 (5G Toolbox)
位相ノイズと無記憶非線形性による劣化を考慮して NR-TM 波形または NR-FRC 波形の EVM を測定する。 - RF 劣化要因と補正によるエンドツーエンドの QAM シミュレーション (Communications Toolbox)
衛星ダウンリンクの RF 劣化要因と補正の効果を示す可視化機能。
コードの生成と展開
- 5G LDPC Block Error Rate Simulation Using the Cloud or a Cluster (Communications Toolbox)
Use the cloud or a cluster for block error rate (BLER) simulation of low-density parity-check (LDPC) coding for the 5G NR downlink shared transport channel (DL-SCH). - ASIC、FPGA、および SoC の無線通信の設計 (Communications Toolbox)
Wireless HDL Toolbox™ ブロックを使用したハードウェアの無線通信アルゴリズムの設計。
ソフトウェア無線
- OFDM Wi-Fi Scanner Using SDR Preamble Detection (Wireless Testbench)
Retrieve Wi-Fi® network information from captured OFDM packets. (R2022a 以降) - Recover and Analyze Packets in 802.11 Waveform (WLAN Toolbox)
Blindly detect, decode, and analyze IEEE 802.11™ packets in a waveform. - Bluetooth BR/EDR Waveform Generation and Transmission Using SDR (Bluetooth Toolbox)
Generate and transmit Bluetooth BR/EDR waveform by using SDR.




