Main Content

train

Train reinforcement learning agents within a specified environment

Description

trainStats = train(env,agents) trains one or more reinforcement learning agents within a specified environment, using default training options. Although agents is an input argument, after each training episode, train updates the parameters of each agent specified in agents to maximize their expected long-term reward from the environment. This is possible because each agent is an handle object. When training terminates, agents reflects the state of each agent at the end of the final training episode.

trainStats = train(agents,env) performs the same training as the previous syntax.

example

trainStats = train(___,trainOpts) trains agents within env, using the training options object trainOpts. Use training options to specify training parameters such as the criteria for terminating training, when to save agents, the maximum number of episodes to train, and the maximum number of steps per episode. Use this syntax after any of the input arguments in the previous syntaxes.

trainStats = train(agents,env,prevTrainStats) resumes training from the last values of the agent parameters and training results contained in prevTrainStats obtained after the previous function call to train.

Examples

collapse all

Train the agent configured in the Train PG Agent to Balance Cart-Pole System example, within the corresponding environment. The observation from the environment is a vector containing the position and velocity of a cart, as well as the angular position and velocity of the pole. The action is a scalar with two possible elements (a force of either -10 or 10 Newtons applied to a cart).

Load the file containing the environment and a PG agent already configured for it.

load RLTrainExample.mat

Specify some training parameters using rlTrainingOptions. These parameters include the maximum number of episodes to train, the maximum steps per episode, and the conditions for terminating training. For this example, use a maximum of 1000 episodes and 500 steps per episode. Instruct the training to stop when the average reward over the previous five episodes reaches 500. Create a default options set and use dot notation to change some of the parameter values.

trainOpts = rlTrainingOptions;

trainOpts.MaxEpisodes = 1000;
trainOpts.MaxStepsPerEpisode = 500;
trainOpts.StopTrainingCriteria = "AverageReward";
trainOpts.StopTrainingValue = 500;
trainOpts.ScoreAveragingWindowLength = 5;

During training, the train command can save candidate agents that give good results. Further configure the training options to save an agent when the episode reward exceeds 500. Save the agent to a folder called savedAgents.

trainOpts.SaveAgentCriteria = "EpisodeReward";
trainOpts.SaveAgentValue = 500;
trainOpts.SaveAgentDirectory = "savedAgents";

Finally, turn off the command-line display. Turn on the Reinforcement Learning Episode Manager so you can observe the training progress visually.

trainOpts.Verbose = false;
trainOpts.Plots = "training-progress";

You are now ready to train the PG agent. For the predefined cart-pole environment used in this example, you can use plot to generate a visualization of the cart-pole system.

plot(env)

When you run this example, both this visualization and the Reinforcement Learning Episode Manager update with each training episode. Place them side by side on your screen to observe the progress, and train the agent. (This computation can take 20 minutes or more.)

trainingInfo = train(agent,env,trainOpts);

Episode Manager shows that the training successfully reaches the termination condition of a reward of 500 averaged over the previous five episodes. At each training episode, train updates agent with the parameters learned in the previous episode. When training terminates, you can simulate the environment with the trained agent to evaluate its performance. The environment plot updates during simulation as it did during training.

simOptions = rlSimulationOptions('MaxSteps',500);
experience = sim(env,agent,simOptions);

During training, train saves to disk any agents that meet the condition specified with trainOps.SaveAgentCritera and trainOpts.SaveAgentValue. To test the performance of any of those agents, you can load the data from the data files in the folder you specified using trainOpts.SaveAgentDirectory, and simulate the environment with that agent.

This example shows how to set up a multi-agent training session on a Simulink® environment. In the example, you train two agents to collaboratively perform the task of moving an object.

The environment in this example is a frictionless two dimensional surface containing elements represented by circles. A target object C is represented by the blue circle with a radius of 2 m, and robots A (red) and B (green) are represented by smaller circles with radii of 1 m each. The robots attempt to move object C outside a circular ring of a radius 8 m by applying forces through collision. All elements within the environment have mass and obey Newton's laws of motion. In addition, contact forces between the elements and the environment boundaries are modeled as spring and mass damper systems. The elements can move on the surface through the application of externally applied forces in the X and Y directions. There is no motion in the third dimension and the total energy of the system is conserved.

Set the random seed and create the set of parameters required for this example.

rng(10)
rlCollaborativeTaskParams

Open the Simulink model.

mdl = "rlCollaborativeTask";
open_system(mdl)

For this environment:

  • The 2-dimensional space is bounded from –12 m to 12 m in both the X and Y directions.

  • The contact spring stiffness and damping values are 100 N/m and 0.1 N/m/s, respectively.

  • The agents share the same observations for positions, velocities of A, B, and C and the action values from the last time step.

  • The simulation terminates when object C moves outside the circular ring.

  • At each time step, the agents receive the following reward:

rA=rglobal+rlocal,ArB=rglobal+rlocal,Brglobal=0.001dcrlocal,A=-0.005dAC-0.008uA2rlocal,B=-0.005dBC-0.008uB2

Here:

  • rAand rB are the rewards received by agents A and B, respectively.

  • rglobal is a team reward that is received by both agents as object C moves closer towards the boundary of the ring.

  • rlocal,A and rlocal,B are local penalties received by agents A and B based on their distances from object C and the magnitude of the action from the last time step.

  • dC is the distance of object C from the center of the ring.

  • dAC and dBC are the distances between agent A and object C and agent B and object C, respectively.

  • The agents apply external forces on the robots that result in motion. uA and uB are the action values of the two agents A and B from the last time step. The range of action values is between -1 and 1.

Environment

To create a multi-agent environment, specify the block paths of the agents using a string array. Also, specify the observation and action specification objects using cell arrays. The order of the specification objects in the cell array must match the order specified in the block path array. When agents are available in the MATLAB workspace at the time of environment creation, the observation and action specification arrays are optional. For more information on creating multi-agent environments, see rlSimulinkEnv.

Create the I/O specifications for the environment. In this example, the agents are homogeneous and have the same I/O specifications.

% Number of observations
numObs = 16;

% Number of actions
numAct = 2;

% Maximum value of externally applied force (N)
maxF = 1.0;

% I/O specifications for each agent
oinfo = rlNumericSpec([numObs,1]);
ainfo = rlNumericSpec([numAct,1], ...
    "UpperLimit", maxF, ...
    "LowerLimit", -maxF);
oinfo.Name = "observations";
ainfo.Name = "forces";

Create the Simulink environment interface.

blks = ["rlCollaborativeTask/Agent A", "rlCollaborativeTask/Agent B"];
obsInfos = {oinfo,oinfo};
actInfos = {ainfo,ainfo};
env = rlSimulinkEnv(mdl,blks,obsInfos,actInfos);

Specify a reset function for the environment. The reset function resetRobots ensures that the robots start from random initial positions at the beginning of each episode.

env.ResetFcn = @(in) resetRobots(in,RA,RB,RC,boundaryR);

Agents

This example uses two Proximal Policy Optimization (PPO) agents with continuous action spaces. The agents apply external forces on the robots that result in motion. To learn more about PPO agents, see Proximal Policy Optimization Agents.

The agents collect experiences until the experience horizon (600 steps) is reached. After trajectory completion, the agents learn from mini-batches of 300 experiences. An objective function clip factor of 0.2 is used to improve training stability and a discount factor of 0.99 is used to encourage long-term rewards.

Specify the agent options for this example.

agentOptions = rlPPOAgentOptions(...
    "ExperienceHorizon",600,...
    "ClipFactor",0.2,...
    "EntropyLossWeight",0.01,...
    "MiniBatchSize",300,...
    "NumEpoch",4,...
    "AdvantageEstimateMethod","gae",...
    "GAEFactor",0.95,...
    "SampleTime",Ts,...
    "DiscountFactor",0.99);
agentOptions.ActorOptimizerOptions.LearnRate  = 1e-4;
agentOptions.CriticOptimizerOptions.LearnRate = 1e-4;

Create the agents using the default agent creation syntax. For more information see rlPPOAgent.

agentA = rlPPOAgent(oinfo, ainfo, ...
    rlAgentInitializationOptions("NumHiddenUnit", 200), agentOptions);
agentB = rlPPOAgent(oinfo, ainfo, ...
    rlAgentInitializationOptions("NumHiddenUnit", 200), agentOptions);

Training

To train multiple agents, you can pass an array of agents to the train function. The order of agents in the array must match the order of agent block paths specified during environment creation. Doing so ensures that the agent objects are linked to their appropriate I/O interfaces in the environment.

You can train multiple agents in a decentralized or centralized manner. In decentralized training, agents collect their own set of experiences during the episodes and learn independently from those experiences. In centralized training, the agents share the collected experiences and learn from them together. The actor and critic functions are synchronized between the agents after trajectory completion.

To configure a multi-agent training, you can create agent groups and specify a learning strategy for each group through the rlMultiAgentTrainingOptions object. Each agent group may contain unique agent indices, and the learning strategy can be "centralized" or "decentralized". For example, you can use the following command to configure training for three agent groups with different learning strategies. The agents with indices [1,2] and [3,4] learn in a centralized manner while agent 4 learns in a decentralized manner.

opts = rlMultiAgentTrainingOptions("AgentGroups", {[1,2], 4, [3,5]}, "LearningStrategy", ["centralized","decentralized","centralized"])

For more information on multi-agent training, type help rlMultiAgentTrainingOptions in MATLAB.

You can perform decentralized or centralized training by running one of the following sections using the Run Section button.

1. Decentralized Training

To configure decentralized multi-agent training for this example:

  • Automatically assign agent groups using the AgentGroups=auto option. This allocates each agent in a separate group.

  • Specify the "decentralized" learning strategy.

  • Run the training for at most 1000 episodes, with each episode lasting at most 600 time steps.

  • Stop the training of an agent when its average reward over 30 consecutive episodes is –10 or more.

trainOpts = rlMultiAgentTrainingOptions(...
    "AgentGroups","auto",...
    "LearningStrategy","decentralized",...
    "MaxEpisodes",1000,...
    "MaxStepsPerEpisode",600,...
    "ScoreAveragingWindowLength",30,...
    "StopTrainingCriteria","AverageReward",...
    "StopTrainingValue",-10);

Train the agents using the train function. Training can take several hours to complete depending on the available computational power. To save time, load the MAT file decentralizedAgents.mat which contains a set of pretrained agents. To train the agents yourself, set doTraining to true.

doTraining = false;
if doTraining
    decentralizedTrainResults = train([agentA,agentB],env,trainOpts);
else
    load("decentralizedAgents.mat");
end

The following figure shows a snapshot of decentralized training progress. You can expect different results due to randomness in the training process.

2. Centralized Training

To configure centralized multi-agent training for this example:

  • Allocate both agents (with indices 1 and 2) in a single group. You can do this by specifying the agent indices in the "AgentGroups" option.

  • Specify the "centralized" learning strategy.

  • Run the training for at most 1000 episodes, with each episode lasting at most 600 time steps.

  • Stop the training of an agent when its average reward over 30 consecutive episodes is –10 or more.

trainOpts = rlMultiAgentTrainingOptions(...
    "AgentGroups",{[1,2]},...
    "LearningStrategy","centralized",...
    "MaxEpisodes",1000,...
    "MaxStepsPerEpisode",600,...
    "ScoreAveragingWindowLength",30,...
    "StopTrainingCriteria","AverageReward",...
    "StopTrainingValue",-10);

Train the agents using the train function. Training can take several hours to complete depending on the available computational power. To save time, load the MAT file centralizedAgents.mat which contains a set of pretrained agents. To train the agents yourself, set doTraining to true.

doTraining = false;
if doTraining
    centralizedTrainResults = train([agentA,agentB],env,trainOpts);
else
    load("centralizedAgents.mat");
end

The following figure shows a snapshot of centralized training progress. You can expect different results due to randomness in the training process.

Simulation

Once the training is finished, simulate the trained agents with the environment.

simOptions = rlSimulationOptions("MaxSteps",300);
exp = sim(env,[agentA agentB],simOptions);

Figure Multi Agent Collaborative Task contains an axes object. The axes object contains 5 objects of type rectangle, text.

For more information on agent simulation, see rlSimulationOptions and sim.

This example shows how to resume training using existing training data for training Q-learning. For more information on these agents, see Q-Learning Agents and SARSA Agents.

Create Grid World Environment

For this example, create the basic grid world environment.

env = rlPredefinedEnv("BasicGridWorld");

To specify that the initial state of the agent is always [2,1], create a reset function that returns the state number for the initial agent state.

x0 = [1:12 15:17 19:22 24];
env.ResetFcn = @() x0(randi(numel(x0)));

Fix the random generator seed for reproducibility.

rng(1)

Create Q-Learning Agent

To create a Q-learning agent, first create a Q table using the observation and action specifications from the grid world environment. Set the learning rate of the representation to 1.

qTable = rlTable(getObservationInfo(env),getActionInfo(env));
qVf = rlQValueFunction(qTable,getObservationInfo(env),getActionInfo(env));

Next, create a Q-learning agent using this table representation and configure the epsilon-greedy exploration. For more information on creating Q-learning agents, see rlQAgent and rlQAgentOptions. Keep the default value of the discount factor to 0.99.

agentOpts = rlQAgentOptions;
agentOpts.EpsilonGreedyExploration.Epsilon = 0.2;
agentOpts.CriticOptimizerOptions.LearnRate = 0.2;
agentOpts.EpsilonGreedyExploration.EpsilonDecay = 1e-3;
agentOpts.EpsilonGreedyExploration.EpsilonMin = 1e-3;
agentOpts.DiscountFactor = 1;
qAgent = rlQAgent(qVf,agentOpts);

Train Q-Learning Agent for 100 Episodes

To train the agent, first specify the training options. For more information, see rlTrainingOptions.

trainOpts = rlTrainingOptions;
trainOpts.MaxStepsPerEpisode = 200;
trainOpts.MaxEpisodes = 1e6;
trainOpts.Plots = "none";
trainOpts.Verbose = false;

trainOpts.StopTrainingCriteria = "EpisodeCount";
trainOpts.StopTrainingValue = 100;
trainOpts.ScoreAveragingWindowLength = 30;

Train the Q-learning agent using the train function. Training can take several minutes to complete. To save time while running this example, load a pretrained agent by setting doTraining to false. To train the agent yourself, set doTraining to true.

trainingStats = train(qAgent,env,trainOpts);

Display index of last episode.

trainingStats.EpisodeIndex(end)
ans = 100

Train Q-Learning Agent for 200 More Episodes

Set the training to stop after episode 300.

trainingStats.TrainingOptions.StopTrainingValue = 300;

Resume the training using the training data that exists in trainingStats.

trainingStats = train(qAgent,env,trainingStats);

Display index of last episode.

trainingStats.EpisodeIndex(end)
ans = 300

Plot episode reward.

figure()
plot(trainingStats.EpisodeIndex,trainingStats.EpisodeReward)
title('Episode Reward')
xlabel('EpisodeIndex')
ylabel('EpisodeReward')

Figure contains an axes object. The axes object with title Episode Reward contains an object of type line.

Display the final Q-value table.

qAgentFinalQ = getLearnableParameters(getCritic(qAgent));
qAgentFinalQ{1}
ans = 25x4 single matrix

    4.8373   10.0000   -1.3036    0.8020
    9.2058    4.3147   11.0000    5.8501
   10.0000    3.3987    4.5830   -6.4751
    6.3569    6.0000    8.9971    5.4393
    5.0433    5.8399    7.0067    4.1439
    5.1031    8.5228   10.9936    0.1200
    9.9616    8.8647   12.0000   10.0026
   11.0000    8.4131    8.6974    6.0001
   10.0000    6.9997    5.8122    8.5523
    7.1164    7.0019    8.0000    5.8196
      ⋮

Validate Q-Learning Results

To validate the training results, simulate the agent in the training environment.

Before running the simulation, visualize the environment and configure the visualization to maintain a trace of the agent states.

plot(env)
env.ResetFcn = @() 2;
env.Model.Viewer.ShowTrace = true;
env.Model.Viewer.clearTrace;

Simulate the agent in the environment using the sim function.

sim(qAgent,env)

Input Arguments

collapse all

Agents to train, specified as a reinforcement learning agent object, such as rlACAgent or rlDDPGAgent, or as an array of such objects.

If env is a multi-agent environment created with rlSimulinkEnv, specify agents as an array. The order of the agents in the array must match the agent order used to create env. Multi-agent training is not supported for MATLAB® environments.

Note

train updates the agents as training progresses. This is possible because each agent is an handle object. To preserve the original agent parameters for later use, save the agent to a MAT-file (if you copy the agent into a new variable, the new variable will also always point to the most recent agent version with updated parameters). For more information about handle objects, see Handle Object Behavior.

Note

When training terminates, agents reflects the state of each agent at the end of the final training episode. The rewards obtained by the final agents are not necessarily the highest achieved during the training process, due to continuous exploration. To save agents during training, create an rlTrainingOptions object specifying the SaveAgentCriteria and SaveAgentValue properties and pass it to train as a trainOpts argument.

For more information about how to create and configure agents for reinforcement learning, see Reinforcement Learning Agents.

Environment in which the agents act, specified as one of the following kinds of reinforcement learning environment object:

  • A predefined MATLAB or Simulink® environment created using rlPredefinedEnv. This kind of environment does not support training multiple agents at the same time.

  • A custom MATLAB environment you create with functions such as rlFunctionEnv or rlCreateEnvTemplate. This kind of environment does not support training multiple agents at the same time.

  • A custom Simulink environment you create using rlSimulinkEnv. This kind of environment supports training multiple agents at the same time.

For more information about creating and configuring environments, see:

When env is a Simulink environment, calling train compiles and simulates the model associated with the environment.

Training parameters and options, specified as either an rlTrainingOptions or an rlMultiAgentTrainingOptions object. Use this argument to specify such parameters and options as:

  • Criteria for ending training

  • Criteria for saving candidate agents

  • How to display training progress

  • Options for parallel computing

For details, see rlTrainingOptions and rlMultiAgentTrainingOptions.

Training episode data, specified as an:

  • rlTrainingResult object, when training a single agent.

  • Array of rlTrainingResult objects when training multiple agents.

Use this argument to resume training from the exact point at which it stopped. This starts the training from the last values of the agent parameters and training results object obtained after the previous train function call. prevTrainStats contains, as one of its properties, the rlTrainingOptions object or the rlMultiAgentTrainingOptions object specifying the training option set. Therefore, to restart the training with updated training options, first change the training options in trainResults using dot notation. If the maximum number of episodes was already reached in the previous training session, you must increase the maximum number of episodes.

For details about the rlTrainingResult object properties, see the trainStats output argument.

Output Arguments

collapse all

Training episode data, returned as an:

  • rlTrainingResult object, when training a single agent.

  • Array of rlTrainingResult objects when training multiple agents.

The following properties pertain to the rlTrainingResult object:

Episode numbers, returned as the column vector [1;2;…;N], where N is the number of episodes in the training run. This vector is useful if you want to plot the evolution of other quantities from episode to episode.

Reward for each episode, returned in a column vector of length N. Each entry contains the reward for the corresponding episode.

Number of steps in each episode, returned in a column vector of length N. Each entry contains the number of steps in the corresponding episode.

Average reward over the averaging window specified in trainOpts, returned as a column vector of length N. Each entry contains the average award computed at the end of the corresponding episode.

Total number of agent steps in training, returned as a column vector of length N. Each entry contains the cumulative sum of the entries in EpisodeSteps up to that point.

Critic estimate of long-term reward using the current agent and the environment initial conditions, returned as a column vector of length N. Each entry is the critic estimate (Q0) for the agent of the corresponding episode. This field is present only for agents that have critics, such as rlDDPGAgent and rlDQNAgent.

Information collected during the simulations performed for training, returned as:

  • For training in MATLAB environments, a structure containing the field SimulationError. This field is a column vector with one entry per episode. When the StopOnError option of rlTrainingOptions is "off", each entry contains any errors that occurred during the corresponding episode.

  • For training in Simulink environments, a vector of Simulink.SimulationOutput objects containing simulation data recorded during the corresponding episode. Recorded data for an episode includes any signals and states that the model is configured to log, simulation metadata, and any errors that occurred during the corresponding episode.

Training options set, returned as:

  • For a single agent, an rlTrainingOptions object. For more information, see the rlTrainingOptions reference page.

  • For multiple agents, an rlMultiAgentTrainingOptions object. For more information, see the rlMultiAgentTrainingOptions reference page.

Tips

  • train updates the agents as training progresses. To preserve the original agent parameters for later use, save the agents to a MAT-file.

  • By default, calling train opens the Reinforcement Learning Episode Manager, which lets you visualize the progress of the training. The Episode Manager plot shows the reward for each episode, a running average reward value, and the critic estimate Q0 (for agents that have critics). The Episode Manager also displays various episode and training statistics. To turn off the Reinforcement Learning Episode Manager, set the Plots option of trainOpts to "none".

  • If you use a predefined environment for which there is a visualization, you can use plot(env) to visualize the environment. If you call plot(env) before training, then the visualization updates during training to allow you to visualize the progress of each episode. (For custom environments, you must implement your own plot method.)

  • Training terminates when the conditions specified in trainOpts are satisfied. To terminate training in progress, in the Reinforcement Learning Episode Manager, click Stop Training. Because train updates the agent at each episode, you can resume training by calling train(agent,env,trainOpts) again, without losing the trained parameters learned during the first call to train.

  • During training, you can save candidate agents that meet conditions you specify with trainOpts. For instance, you can save any agent whose episode reward exceeds a certain value, even if the overall condition for terminating training is not yet satisfied. train stores saved agents in a MAT-file in the folder you specify with trainOpts. Saved agents can be useful, for instance, to allow you to test candidate agents generated during a long-running training process. For details about saving criteria and saving location, see rlTrainingOptions.

Algorithms

In general, train performs the following iterative steps:

  1. Initialize agent.

  2. For each episode:

    1. Reset the environment.

    2. Get the initial observation s0 from the environment.

    3. Compute the initial action a0 = μ(s0).

    4. Set the current action to the initial action (aa0) and set the current observation to the initial observation (ss0).

    5. While the episode is not finished or terminated:

      1. Step the environment with action a to obtain the next observation s' and the reward r.

      2. Learn from the experience set (s,a,r,s').

      3. Compute the next action a' = μ(s').

      4. Update the current action with the next action (aa') and update the current observation with the next observation (ss').

      5. Break if the episode termination conditions defined in the environment are met.

  3. If the training termination condition defined by trainOpts is met, terminate training. Otherwise, begin the next episode.

The specifics of how train performs these computations depends on your configuration of the agent and environment. For instance, resetting the environment at the start of each episode can include randomizing initial state values, if you configure your environment to do so.

Extended Capabilities

Version History

Introduced in R2019a

expand all