ContentProvider to send MATLAB strings
StringProvider object to send a MATLAB® string or character vector in a
RequestMessage. By default, if a
RequestMessage.Body.Data property contains a string or character
vector, then it is converted to binary according to the encoding (charset) specified or
implied by the Content-Type field in the message, so you would not normally need to use this
object to send plain text in cases where MATLAB can determine what encoding to use.
Use this object in a
Request.Body property to send a string encoded
using a charset that might be different from the one that MATLAB would use for the Content-Type in the header. You specify that charset in the
ContentProvider constructor or by setting the
property. If the message contains no Content-Type, this provider adds one specifying
"text/plain" and the specified charset.
matlab.net.http.io.StringProvider class is a
provider = StringProvider constructs a
StringProvider to send the data in the
encoded with the value specified in the
Charset property. Set these
properties before sending a message that contains this provider.
provider = StringProvider(
StringProvider to send the specified
encoded with the specified
charset. The constructor sets the
Data property to the value of
data and the
Charset property to the value of
charset argument is optional.
Data— Data to send
Data to send, specified as a string or character vector. This is the value of Data that was provided to the constructor. You also can set this property directly, after calling the constructor, or in your subclass.
Subclass authors can set this property to new data at any time. The next call to
getData converts this data, up to the value of the
Charset— Character set used for encoding
''(default) | character vector
Character set used for encoding, specified as a character vector.
Header— Header fields of message or part
Header fields of the message or part, specified as a vector of one or more
This property is only used by subclass authors. MATLAB sets this property before calling the provider's
method. For non-multipart messages, MATLAB initializes this property to the contents of
Request.Header, minus any
empty-valued fields. The
ContentProvider uses this property to add header
fields that describe the data to be sent, or to add parameters to header fields already
in the message. In a delegate for a
MultipartProvider, MATLAB initializes this property to header fields that the delegating provider
intends to insert for the part. Delegates can modify or change these fields.
Upon return from the provider's
complete method, if this not a
multipart message, then MATLAB reads this property and merges its contents into the header of
Request. Fields in this
Names that do not already appear in
Request.Header are added to the end of
Request.Header. If a field in this
Name that is the same as one in
Request.Header, and both have nonempty
If the one in
Request.Header is a
GenericField, then ignore the one in
If the one in
Request.Header is not a
GenericField, then replace it with the one in
If one or both of these has an empty
Value, then the field is
Request.Header and it is not added as part of normal
If this is a delegate of a
MultipartProvider, then the entire contents
Header is used as the header of the part. Multipart
delegates must not assume that
Request.Header contains any fields
pertaining to their own
Header. A provider can determine whether it
is a multipart delegate by checking whether
MyDelegator is a
MultipartProvider, though this test is unlikely to be needed.
MATLAB reads this property only on return from calling the provider's
complete method. Changes to this array are ignored once MATLAB calls
Class authors should be aware that their subclasses might have added fields to this
Header (in their
complete method) before
complete in their superclass. It is best to preserve such
fields and not to add fields with the same names. However, adding a parameter to a field
is permissible. For example, a superclass can add a charset parameter to an existing
Content-Type field that does not already have one.
ForceChunked— Indicate whether to force chunked transfer coding
Indicate whether to force chunked transfer coding, specified as boolean. This property is of interest only to subclass authors, and is applicable only to providers that are not multipart delegates. Subclasses set
ForceChunked to control whether contents should be sent using chunked transfer coding. If
false (default), MATLAB decides whether to send the contents chunked, based on whether it knows the content length at the time the message is ready to be sent:
If MATLAB knows the content length (which is the case if the message contains a Content-Length field, or if this provider's
expectedContentLength method returned a number), then MATLAB decides whether to send it chunked or not.
If MATLAB does not know the content length (no Content-Length field in the header and
expectedContentLength returned empty), then MATLAB always sends the message chunked.
true, then MATLAB sends the message chunked regardless of whether it knows the content length, unless the known length is smaller than the chunk size. If this property is
true, then the message must not contain a Content-Length field, because HTTP does not allow a chunked message to have a Content-Length field. However, you can still return a nonzero value in the
expectedContentLength method if you want MATLAB to verify that you are returning the expected length of data.
When MATLAB chooses to send the message chunked, the size of each chunk is equal to the length of data returned by
Request— Request message to send
Request message to send, specified as a
This property is used only by subclass authors. The
methods set this property to the
RequestMessage in whose
Body this provider has been placed, before calling any other
methods in this provider, and before adding any additional header fields or validating
the message. The provider can examine this message to see what was contained in the
Delegates see the same value for this property as the delegator.
ContentProviders should be aware that, if they are delegates, they
are not necessarily providing the entire body of the request message, so they should not
assume that header fields in this Request are pertinent to the data they are providing.
Usually, delegates should ignore header fields in this request relevant to the data,
such as Content-Type.
If the provider wishes to add any header fields to this message, or to modify existing
ones, it should do so in its
method by adding those fields to the
Header property. The caller of
RequestMessage or a delegating provider)
determines what to do with those fields.
RequestMessage.complete always copy these fields to the
Header of the
RequestMessage. A delegating
provider can copy the fields to its own
Header property or insert
them into the message (as in the case of
MultipartProvider). For more
information, see the Header property.
This property is read-only.
ContentProviderto which this provider is delegating
ContentProvider to which this provider is delegating, specified as a
matlab.net.http.io.ContentProvider object. This property is set in the calling provider (the delegator) by the
delegateTo method to indicate the current delegated provider. If there is no current delegation, then the value is empty.
complete methods set this property to empty.
ContentProviderthat delegated to this provider
ContentProvider that delegated to this provider, specified as a
ContentProvider delegates responsibility for sending all or a portion of the message data to another provider, then this property identifies the delegating provider to the delegate. For example, a
MultipartProvider delegates parts of the message to other providers, so it inserts a handle to itself in each delegate. Otherwise,
MyDelegator is empty. The
delegateTo method sets this property in the delegate.
|Next buffer of data to send in HTTP request message from StringProvider|
These methods specialize standard MATLAB operators and functions and inherited methods for objects in this class.
Provider information as string
Display provider information
|Complete HTTP header for StringProvider|
|Preferred buffer size for ContentProvider|
|Content length of ContentProvider|
|Start data transfer from StringProvider|
|Indicate whether ImageProvider is restartable|
|Indicate whether ImageProvider is reusable|
|Delegate to another provider|
The following code prepares a message that sends the string
"myText" using the Content-Type
the server using Shift_JIS encoding:
ctf = ContentTypeField(MediaType('text/plain','charset','Shift_JIS'); r = RequestMessage('put',ctf,StringProvider('myText'));
In this example, the header has no Content-Type field, so
StringProvider inserts one based on the constructor arguments.
r = RequestMessage('put',,StringProvider('myText','Shift_JIS')); show(r.complete('www.someurl.com'))
PUT / HTTP/1.1 Host: www.someurl.com Content-Type: text/plain; charset=Shift_JIS User-Agent: MATLAB/126.96.36.1992567 (R2017b) Connection: close Date: Fri, 20 Jun 2017 14:26:42 GMT
In this example, the charset specified to the
constructor used to convert the data is different from the charset in the Content-Type
StringProvider does not alter an existing Content-Type field that
already specifies a character set, so the server assumes that the data is US-ASCII, not
ctf = ContentTypeField(MediaType('text/plain','charset','US-ASCII')); r = RequestMessage('put',ctf,StringProvider('myText','Shift_JIS'));
In this example, MATLAB adds a charset parameter to the Content-Type field that did not specify a
charset, because the default for
"application/json" is UTF-8, which
is different from Shift_JIS.
ctf = ContentTypeField(MediaType('application/json')); r = RequestMessage('put',ctf,StringProvider('myText','Shift_JIS')); show(r.complete('www.someurl.com'))
PUT / HTTP/1.1 Host: www.someurl.com Content-Type: application/json; charset=Shift_JIS User-Agent: MATLAB/188.8.131.522567 (R2017b) Connection: close Date: Fri, 20 Jun 2017 14:26:42 GMT
When there is no Content-Type header field and no charset is specified to
StringProvider, MATLAB uses a heuristic to find the "minimal" encoding that can represent the
data, one of which includes the default encoding for the platform. In this example when
run on Windows, the Unicode® characters in the string are within the Windows-1252 range, but outside
the US-ASCII range, so Windows-1252 is used:
r = RequestMessage('put',,StringProvider('€abc')); show(r.complete('www.someurl.com'))
PUT / HTTP/1.1 Host: www.someurl.com Content-Type: text/plain; charset=windows-1252 User-Agent: MATLAB/184.108.40.2062567 (R2017b) Connection: close Date: Fri, 20 Jun 2017 14:26:42 GMT
In this case, the Content-Type field specifies
with no charset, and none is specified to
StringProvider. Since the
default charset for
"application/json" is UTF-8,
StringProvider uses that to convert and does not specify the charset
explicitly in the Content-Type field.
ctf = ContentTypeField(MediaType('application/json')); r = RequestMessage('put',ctf,StringProvider('myText')); % uses UTF-8