統計
MATLAB Answers
0 質問
19 回答
ランク
of 177,301
コントリビューション
0 問題
0 解答
スコア
0
バッジ数
0
コントリビューション
0 投稿
コントリビューション
0 パブリック チャネル
平均評価
コントリビューション
0 ハイライト
平均いいねの数
Feeds
回答済み
Where do I find a simple frequency divider to be used in PLL feedback path
Mixed-Signal Blockse has dedicated resource on PLL that will be useful : Phase-Locked Loops - MATLAB & Simulink Phase-Locked ...
Where do I find a simple frequency divider to be used in PLL feedback path
Mixed-Signal Blockse has dedicated resource on PLL that will be useful : Phase-Locked Loops - MATLAB & Simulink Phase-Locked ...
2日 前 | 0
回答済み
vco in high frequency
The triangular waveform you see on the Scope is most likely not caused by an incorrect VCO frequency setting. If you are using ...
vco in high frequency
The triangular waveform you see on the Scope is most likely not caused by an incorrect VCO frequency setting. If you are using ...
2日 前 | 0
回答済み
Mixed Signal Analysis in Simulink
Simulink does support mixed-signal system modeling, and you may not need to discretize the entire analog front end using a bilin...
Mixed Signal Analysis in Simulink
Simulink does support mixed-signal system modeling, and you may not need to discretize the entire analog front end using a bilin...
2日 前 | 0
回答済み
sar adc in simulink
Mixed-Signal Blockset has following resources for SAR ADC that can be useful : SAR ADC - N-bit successive approximation regist...
sar adc in simulink
Mixed-Signal Blockset has following resources for SAR ADC that can be useful : SAR ADC - N-bit successive approximation regist...
2日 前 | 0
回答済み
Mixed-Signal Systems: PLL Design
I would highly recommend to check Mixed-Signal Blockset page where we have a dedicated resources reated to Phase Locked Loops (P...
Mixed-Signal Systems: PLL Design
I would highly recommend to check Mixed-Signal Blockset page where we have a dedicated resources reated to Phase Locked Loops (P...
2日 前 | 0
回答済み
A basic question: How to using eyeDiagramSI function?
The issue is likely not with eyeDiagramSI itself, but with the format of the signal being provided to it. The eyeDiagramSI obje...
A basic question: How to using eyeDiagramSI function?
The issue is likely not with eyeDiagramSI itself, but with the format of the signal being provided to it. The eyeDiagramSI obje...
2日 前 | 0
回答済み
Filter out a particular frequency from a mixed signal
The statement that a discrete FIR or IIR filter cannot be implemented for a 50 Hz signal at a 1 MHz sampling rate is somewhat to...
Filter out a particular frequency from a mixed signal
The statement that a discrete FIR or IIR filter cannot be implemented for a 50 Hz signal at a 1 MHz sampling rate is somewhat to...
2日 前 | 0
回答済み
how to simulate ADC through matlab code
Sorry for the typo. I meant to say "2^N quantization level"
how to simulate ADC through matlab code
Sorry for the typo. I meant to say "2^N quantization level"
約1ヶ月 前 | 0
回答済み
Why is the Equivalent Number of Bits (ENOB) in my SAR ADC model and testbench greater than the actual number of bits?
The ENOB can exceed the nominal number of bits in this case because of how it is calculated.Key reason ENOB is derived from SIN...
Why is the Equivalent Number of Bits (ENOB) in my SAR ADC model and testbench greater than the actual number of bits?
The ENOB can exceed the nominal number of bits in this case because of how it is calculated.Key reason ENOB is derived from SIN...
約1ヶ月 前 | 0
回答済み
HELP WITH Integral nonlinearity (INL) and differential nonlinearity (DNL) of data converters
You can compute INL and DNL directly from your transfer curve using the built‑in inldnl function in MATLAB. s = inldnl(analog, ...
HELP WITH Integral nonlinearity (INL) and differential nonlinearity (DNL) of data converters
You can compute INL and DNL directly from your transfer curve using the built‑in inldnl function in MATLAB. s = inldnl(analog, ...
約1ヶ月 前 | 0
回答済み
how to simulate ADC through matlab code
If your goal is to simulate an ADC in MATLAB, it depends on the level of abstraction you want.1. Basic MATLAB (code-only) approa...
how to simulate ADC through matlab code
If your goal is to simulate an ADC in MATLAB, it depends on the level of abstraction you want.1. Basic MATLAB (code-only) approa...
約1ヶ月 前 | 0
回答済み
Xilinx system generator HW co-simulation the Drive DAC input and ADC output are missing
This behavior is expected and is due to differences between older and newer System Generator workflows. The video you’re follow...
Xilinx system generator HW co-simulation the Drive DAC input and ADC output are missing
This behavior is expected and is due to differences between older and newer System Generator workflows. The video you’re follow...
約1ヶ月 前 | 0
回答済み
Delta sigma modulator PSD simulation
Your DSM implementation is likely fine—the mismatch is coming from how the PSD is being computed. Key things to fix Don’t use ...
Delta sigma modulator PSD simulation
Your DSM implementation is likely fine—the mismatch is coming from how the PSD is being computed. Key things to fix Don’t use ...
約1ヶ月 前 | 0
回答済み
how to design successive approximation register in simulink
Designing a successive approximation register (SAR) in Simulink from scratch is possible, but it typically requires building sev...
how to design successive approximation register in simulink
Designing a successive approximation register (SAR) in Simulink from scratch is possible, but it typically requires building sev...
約1ヶ月 前 | 0
回答済み
Plotting data from adc in matlab
The question you’re asking—how to plot ADC data in MATLAB—is primarily about getting sampled data into MATLAB and visualizing it...
Plotting data from adc in matlab
The question you’re asking—how to plot ADC data in MATLAB—is primarily about getting sampled data into MATLAB and visualizing it...
約1ヶ月 前 | 0
回答済み
PLL no lock
From the description, your PLL is locking for a small frequency offset but begins to oscillate when the reference frequency incr...
PLL no lock
From the description, your PLL is locking for a small frequency offset but begins to oscillate when the reference frequency incr...
約1ヶ月 前 | 0
回答済み
How to import my validated mixed signal design from Matlab into cadence tools for ASIC implementation?
Mixed-Signal Blockset is designed to complement Cadence-based design flows, with integration points that enable both data-driven...
How to import my validated mixed signal design from Matlab into cadence tools for ASIC implementation?
Mixed-Signal Blockset is designed to complement Cadence-based design flows, with integration points that enable both data-driven...
約1ヶ月 前 | 0
回答済み
digital to analog converter to estimate mismatch standard deivation (sigma)
Mixed-Signal Blockset includes a set of DAC blocks within its data converter library, along with feature examples that demonstra...
digital to analog converter to estimate mismatch standard deivation (sigma)
Mixed-Signal Blockset includes a set of DAC blocks within its data converter library, along with feature examples that demonstra...
約1ヶ月 前 | 0
回答済み
Why was the continuous-time VCO block discontinued in the Communications Toolbox, and what is the recommended way to model it for PLL/RF synthesizer design?
Recommended approach to realistically model a continuous‑time VCO in Simulink for PLL / synthesizer applications A practical an...
Why was the continuous-time VCO block discontinued in the Communications Toolbox, and what is the recommended way to model it for PLL/RF synthesizer design?
Recommended approach to realistically model a continuous‑time VCO in Simulink for PLL / synthesizer applications A practical an...
約2ヶ月 前 | 0
