Reset clock

Resets clock and starts again.

This Block makes the clock to get reset, when reset is given a low signal(0), and starts again when it is high. This block can be used to make any thing similar to this.Please give an Email about how

An orange clock

Just a clock

Clock

CODE TO MAKE A CLOCK

CLOCKEX Analog display clock

Chess clock

Digital chess clock with variable time limit and optional extra time per move

You have a chess board but no chess clock is at hand?This simple function displays the remaining time for each player as well as the actual round. The currently active timer is indicated by its bold

3d Clock with geartrain

A clock built using a general 3d rendering engine which supports shafts, gears, and clock-hands.

This is a clock rendered in 3D. The file 'myclock.m' is code for a rendering generic 3D image made up of the basic objects: hands, shafts, and gears. It wouldn't necessarily have to be a gear train

rtc: a pedestrian real-time clock figure

creates a versatilely configurable real-time clock in a figure

- creates a real-time clock (using a timer object), which runs smoothly in the background while the user continues with her daily ML chores.- all aspecects of the display (geometry) are

Clock Signal Jitter Simulation

This function creates a user definable digital clock signal that you can add random jitter to.

This function creates a user definable digital clock signal waveform with random jitter on it. This function can be used to generate waveform data that can be uploaded onto an arbitrary waveform

Simple Digital Clock

A digital clock which displays the time based on the system clock

Uses the inbuilt clock function to get the system time. Using this, some conditional statements are used to determine what sections of the display need to be fully coloured in in order to display the

Bouncy Ball Clock

Bouncy Ball Clock is a novel clock representation that uses four chambers of elastically colliding b

Bouncy Ball Clock uses four chambers of bouncing balls to represent the time. The upper-left hand chamber contains the same number of balls as the hour. The upper-right hand chamber contains the

Object Oriented Digital Clock

Shows time in 24 hour format. Can use it for stopwatches, clocks or anything that display numbers.

This project contains classes for objects like Seven Segment Displays and Digital Clocks. This is an example of Object Oriented MATLAB programming that does something simple, yet versatile. The

CLOCK version 1.0: display a clock

A simple clock. Version 1.1

version 1.0% 7. Display a complete digital display in the form H:M:S:mS... & H --> 0 to 24% NOTE: CLOCK STARTS AND IS MAITAINED ACCORDING % TO TIME INDICATED BY THE INBUILT COMMAND "clock"% By Sunil

CLOCK

Display a clock in a GUIDE.

Display a clock in a GUIDE.For more information, visit: http://www.matpic.com

My Clock

A example of program with MATLAB for Visualisation .

Star Clock Template Generator

Estimate the time at night by observing the Big Dipper and the Little Dipper

to tell the time at night, you can practice using Vincent van Gogh’s Starry Night over the Rhone was painted in September 1888 in France. Use the star clock to estimate the time.  Then check your

Data Acquisition Toolbox Support Package for Digilent Analog Discovery hardware (R2012a / R2012b)

Analog Input/Output (foreground clocked/non-clocked) support for Digilent Analog Discovery.

This patch will allow users of Data Acquisition Toolbox 3.1 (R2012a) and 3.2 (R2012b) to use the Digilent Analog Discovery board to capture/generate voltage data, both clocked and non-clocked, in the

Classic watch

Displays the analog clock and digital clock

PROWLER code for clock synchronization based on averaging

Consensus based syn code

Daline – Free, open-source tool for power flow linearization

Freely generate data, identify models, and visualize results using over 50 (physics-informed) data-driven approaches.

Monte Carlo Simulation and Derivatives Pricing

Monte Carlo Schemes for advanced models and pricing of derivatives

Mars Rover Robot - 2014 Competition

Simulation and Arduino/Raspberry Pi design and models

Brüel & Kjær LAN-XI Open API MATLAB Simple Recorder GUI

This application demonstrates the use of the Brüel & Kjær LAN-XI Open API in MATLAB including: basic DAQ, signal generation, and PTP sync.

BlockClock

Interesting clock that is composed of animated blocks.

Real-Time Pacer for Simulink

Simulink block for forcing a simulation to run in real (wall clock) time

Simple Digital clock - Speaking clock

12 and 24 hr digital clock which can say the time every 15 minutes with Cortana voice.

did this program to make me do things in time :)This program isA Digital clock with 12 and 24 hr format that Says time every 15 minutes with Cortana voice (Microsoft Eva)!!!!How to make it work:1

Agilent Infiniium and InfiniiVision Oscilloscopes – MATLAB Example

MATLAB application example for Agilent Infiniium and InfiniiVision oscilloscopes

Analog clock

Analog clock, may be used as a component in a larger application

This is an analog clock. It may be placed on any axes, moved and resized, as long as a valid axes handle is provided.It may also be initialized to run as a real-time clock, or updated with an offline

Ni DAQ Toolbox

NiDaq data acquisition National Instruments.

DIGITAL CLOCK

This clock gives system time and date

Click green Radio button to run clock and red radio button to close the clock. even there is a toggle button to show and hide system date.

My Clock

Matlab code to design an Analog clock

Matlab code to design an Analog clock that is sync with the clock of your personal computer

Clock with MATLAB

this function display an analog clock!

Make your analog clock with matlab!Polar coordinates have been used to calculate the angles of the hands.

Clock synchronization and ranging

Matlab scripts for clock synchronization and ranging

Clock synchronization is a key aspect to enable time based tasks (like localization, scheduling, distributed sampling, and so on) in an asynchronous sensor network. Clock synchronization among nodes

contest clock

joke visualization of solitaire contest

Clock Bell

Place the coins on turn basis, on the board to complete &/or to block to gain different medals.

Digital clock integrated with Battery saver

This program is integration of my two programs (Simple Digital clock and Battery saver)

(Kind Request to people who download: Kindly rate and comment about my program. It motivates me to do more programs) I have integrated two programs into one. Which are:1) Simple digital clock

Measuring Clock Jitter with xPC Target

Explains how to measure PC clock jitter using xPC Target.

This article defines common jitter terms, measurements, and analysis techniques. To demonstrate applicability of these methods, xPC Target is used to characterize the clock jitter on a target PC.

Circadian Clock Model Visualisation Tools

Moving 2/3D plots and network diagram of an ode model of the circadian clock gene network

This program presents the solution to an ode model of the circadian clock, published by Locke et al (2005) 'http://www.nature.com/msb/journal/v1/n1/full/msb4100018.html', in two different ways. A

2048 Game Solver

An AI solver to the 2048 Game

GPS Navigation Toolbox

This program include Principle of Radio Navigation Calculation and GPS position error corrections.

GPS navigation has been investigated (Ionosphere, Troposphere and Satellite clock). Ionospheric Error model is generated base on Parkinson and the Tropospheric Error Model based on Hopfiel

Scottsclock

An Analog clock that uses the Timer function and callbacks

This is an analog clock function that I wrote my first week on co-op at the Mathworks. This function uses the timer object to update the clock face ever .1 seconds. This also uses polygons instead of

bvrclock

Virtual Reality Implementation of a Binary Clock

Just type bvrclock at the command line to create and start this binary virtual reality clock. The function opens a window in a virtual world, where 6 columns of appearing and disappearing golden

Digital Date & Time using seven segment displays

The program uses seven segment digits to display date and time of system clock.

Program is initially created to show the seven segment digits. But with the use of clock function, a program is coded to display the system clock.

Rigbox

A MATLAB toolbox for running neurophysiological experiments and managing data

Triangle Pulse Generator

Trigger a triangle pulse at any point in your simulation (not clock dependent)

time (by using a delay or building a signal from scratch). So I baked one myself.The biggest problem was the inability to "reset" the clock (I wanted to use it as a timer to set the width of my pulse

Soft Real Time Block for Pacing Simulink Simulations

This block causes Simulink to advance simulated time at the same average rate as wall-clock time

This is the readme file for Soft Real Time Simulink Block for Pacing Simulink Simulationsand associated c-mex S-functions: (1) sfun_getSystemClockTimeval.c (2) sfun_sleep.c (3

Airport Conveyer Belt

The demo is about a airport conveyer belt modeled in Simulink, with controls modelled in Stateflow.

MIMOtool (MvTools)

App for analysis and synthesis of multi-input multi-output control systems

E-G Metric for quantifying clock-drift error in UWB ranging

This is the code for the work Chen H., Dhekne A., A Metricfor Quantifying UWB Ranging Error Due to Clock Drifts.

OSCILLATOR PHASE NOISE TO RMS CLOCK JITTER

Computes RMS time jitter from phase noise measurement versus frequency.

Computes RMS time jitter from phase noise measurement versus frequency, see:[1] - "OSCILLATOR PHASE NOISE AND SAMPLING CLOCK JITTER" (RETHNAKARAN PULIKKOONATTU)Link

Third Order N-PLL with intermediate high frequency clock

Ideal N-PLL for input frequency of 100MHz and output frequency of 75GHz. Another port for contant 10GHz output is provided in the block.

Steps to run the PLL :1. Extract the content in a folder.2. Run pll.m file3. Run PLL.slx file.The output is observed in 3 ports viz. 75GHz Analog out, Charge Pump Output and 10GHz clock output.

Tolerance Analysis of Electronic Circuits Using MATLAB

Companion Software

41 Complete GUI Examples

41 working GUIs to read and learn.

can I display a digital clock in my GUI? GUI_1719.How can I use a timer in a GUI? GUI_1720.How do I use the buttondownfcn on an axes object? GUI_18, 2821.How do I make a callback talk to another

Sphero Multi-Agent Robotic Testbed for Matlab (SMART_matlab)

A distributed robotic testbed for experimental validation of multi-agent algorithms.

Seven_Segment_Displays

7-segment displays component to use within the App Designer

RADAR simulation

an early warning RADAR simulation

Raspberry Pi 2, get system clock with timeval

This Simulink model has an S-function builder block to access the linux system time via gettimeofday

helpful in targeting the Raspberry Pi device(or any other Simulink Coder target).getSystemClockTimeval.c works on the host PC and also the Raspberry Pi runnning Debian Wheezy linux. The simulink code

ProcessNetwork/ProcessNetwork_Software

Functions for the delineation of Dynamical Process Networks using Information Theory

zapit

General purpose optostimulation system

Asynchronous impulse response measurement

Sample code for acoustic impulse response estimation without clock synchronization

A collection of Matlab scripts illustrating the clock drift estimation algorithm introduced in "Clock drift estimation and compensation for asynchronous impulse response measurements" in Proc

BuildTektronixAWG710xWFM

Generate WFM files for the Tektronix AWG710 and AWG710B

Diurnal Clock Diagram for Clouds

This method divides the area of interest into 10 climatological cloud fraction bins and calculates the diurnal cycle.