142 Downloads
Updated 14 Oct 2020
Design and verify practical SDR systems using Communications System Toolbox™ Support Package for USRP® Radio. The support package enables the use of USRP® as a standalone peripheral for live RF data I/O using MATLAB® functions or Simulink® blocks.
This support package is functional for R2013a and beyond.
Inspired: costas receiver, moesp(y,u,d)
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Create scripts with code, output, and formatted text in a single executable document.
Need to ask mathworks for the optimized SIMULINK template for this to work at all!!!!
Does anybody know where I can find the tutorial using SDR with Matlab on USRP b210 kit to send the data in wireless ? I try to find the support and how to code but there no much source for this.
Thanks
I eventually got this to work on my Ettus X310. It takes an insane amount of time to initialize the comm.SDRuTransmitter() and comm.SDRuReceiver() objects. About ~40 seconds per. And then when sending data to the Transmitter object, or receiving data from the Receiver object, that operation takes about 20 seconds total, when first calling those objects. Unfortunately, I kept having to release both objects to get my data to transmit/receive properly, otherwise I ran into issues.
I still can't get burst mode to work. After defining the number of frames I want to transfer to the SDR, supposedly it only transfers the data once called Nframe times. That makes sense. But unfortunately, once I call it that NFrame-th time, I get an error. I've since given up as I ran out of time and had to get something working. So I was forced to release(tx); release(rx); each data transfer resulting in each loop taking ~20 seconds each. Since I need to process 1000s of loops, I'm forced to let it run for a long time.
To be fair, I can probably streamline this process once I figure out more how the comm.SDRuTransmitter & comm.SDRuReceiver objects work. The documentation is kind of weak. Ultimately, I'll probably have to write my own drivers to interface with the UHD drivers so I know what is happening better. That takes time though, and I was hoping this was going to be fast enough to work.
I gave it 5 starts since it does work, and its completely fine for applications not involving processing 100s of iterations of data where processing needs to occur between each.
@ David Comer I am having the same issue, did you find a solution?
I can't install the third party packages for the USRP (Matlab 2016b). Please help me, thanks!
I have some problems using USRP X310 with TwinRX because this Daughterboards are not supported using the latest version. Would it be possible in the next version?
I having issues when I attepmt to package my application for use on other computer (using MATLAB Run-Time with this support package. There are several p-file (e.g. SDRuReceiver.p, SDRuTransmitter.p, sdruroot.p, ...) that are flagged in the application compiler ("P Files Cannot be analyized to find their requirements. Please add P file requirments manually. Dos this mean that I should use a utility to extrace program dependencies and add them for each P file? Also, for some reason, When I run the compiled application, I get an error message that the file usrp_uhd_mapi_mexw64 cannot be found, yet the path reported, and file, exist. Therefore I am thinking this is a Windows path Length limitation. How to I specify the path that should be querried? Any help would be much appreciated.... Thank You in advance.
@CHEAOK KO,
Can you please provide some more details?
翻墙就可以安装了
For all Chinese users who often encounter 3rd-party download failure:
1. Get a ladder to get out of the WALL;
2. set the MATLAB proxy to your ladder;
3. enjoy the comming success download.
downloaded support package.
followed instructions in "readme.txt", typed following into command prompt (run as administrator):
>install_supportsoftware.exe -archives C:\Users\<username>\Downloads\MathWorks\SupportPackages\R2018b\
Got following error message.
'install_supportsoftware.exe' is not recognized as an internal or external command,
operable program or batch file.
I'm running Windows 10.
any help would be appreciated
Failed to download the third-party software
Failed to download the third-party software
please fix it
Failed to download the third-party software
please fix it
Failed to download the third-party software
Failed to download the third-party software
please fix it
As of today, all download errors have been fixed. If you are still having installation problems, please contact MathWorks Support: https://www.mathworks.com/support/contact_us.html
Failed to download the third-party software:
UHD Precompiled Library
please fix it
Hi, had Someone work with Ettus E100 card ? it isn´t possible to find the card from Matlab, it doesn´t recognize ;) - Thank´s¡¡¡
it is so bad
I can't install the third party packages for the USRP,can anybody help me?thanks!
work well with USRP@X310
Good work !!!
download error!
Very good!
I can't install the third party packages for the USRP, any suggestions?
good
Would the development team consider updating this hardware support package for the Ettus Research B205mini-i?
(Given that getSDRuDriverVersion() returns version 003.009.001-vendor, this newer product is likely not supported by this package).
Thank you!
good
I cannot connect to the internet. Do you have full package to install it offline?
Please let me know about it
thank you
I can not connect to the Internet to install this package online. So, what should I do to install it offline? Do you have a full offline package?
Support for these radios is minimal, at best. One of the primary things one wants to do with modern USRP is MIMO processing, yet there is no real support in this toolbox. One cannot specify clock/PPS source, which is a requirement for phase locking. One cannot use timed commands, which is another requirement for phase locking. Seems more of a toy than a real development system.
This install file errors out when trying to unpack the zip file. Please fix.
Having a problem in installing it for USRP N200
Does the B200 require an external 10MHz reference?
When executing the sdruFMMono.slx Simulink object with a lab FM generator (-40 dBm) there is no RX signal received
I have trouble installing this in 2015b or is it not supported for this version?
Support for the B200/210 radio is now available on the MATLAB R2014b platform.
I agree with several others that support for the lower cost B200/210 devices would be very much appreciated. The N200/210 are very expensive devices, and I would guess that there is a large community of folks who prefer to use the lower cost B200/B210 for experimentation.
difficult to understand
USRP B210/200 support would be great! Is there a chance to beta test?
Are there any plans to support the newer USRP radios from Ettus? I am specially interested in controlling the B200 (USB radio) from Matlab.
Disappointing to see only the N200/N210 is supported (IP Addressing only) There are many other (Embedded and BUS + USRP1) devices that could benefit greatly from MatLab support.
Regards
@samu, Please let us know your issue and we can certainly help you
@Ranita, Please let us know your concerns and we can certainly help you.
very nice
difficult to understand
this is really confusing. It shouldn't really take this long for me to getting around to installing this. I am lost trying to find the add-on function that the installer is talking about. Sometimes, it is good to leave it if it is not broken