メインコンテンツ
結果:
Hi, I am currently studying the effects of varying switching frequency towards the inverter and motor system efficiency. I am using the three-phase converter which the gate signal is sent by a PWM generator. Inside the PWM generator block, there is switching frequency parameter. Therefore, is it possible if I can tune the value of switching frequency by making it as input and receving the signal in Matlab Simulink similar with Vabc and Vdc instead of tuning from Matlab code?
Hope to receive any comment or suggestion. Thank you.
Definitely not
29%
Probably not
15%
Neutral
11%
Yes, somewhat
18%
Yes, definitely
20%
Not sure
6%
4598 票
Need some guidance on how to model the mutual inductance model from Simscape. The secondary side does not receive the voltage.
Congratulations, @Daniel Vieira for winning the Editor's Pick badge awarded for MATLAB Answers, in recognition of your awesome solution in Why are the results of forward and predict very different in deep learning?
Thank you for providing considered advice about reinforcement learning.
This is a new badge we just introduced to recognize awesome answers people contribute and yours was picked for discovering a creative way to solve the problem, and made the solution clear, and reproducible. Thank you so much for setting a high standard for MATLAB Answers and for your ongoing contribution to the community.
MATLAB Central Team
This is the 6th installment of the wish-list and bug report thread.
This topic is the follow on to the first Wish-list for MATLAB Answer sections and second MATLAB Answers Wish-list #2 (and bug reports). The third started out as New design of the forum - grey on white and the fourth and fifth also grew so large they are slow to load and navigate.
Same idea as the previous ones: one wish (or bug report) per answer, so that people can vote their wishes.
What should you post where?
Next Gen threads (#1): features that would break compatibility with previous versions, but would be nice to have
@anyone posting a new thread when the last one gets too large (about 50 answers seems a reasonable limit per thread), please update this list in all last threads. (if you don't have editing privileges, just post a comment asking someone to do the edit)
For Q&A
17%
For programming tasks
27%
For writing
9%
For fun
26%
Other use-case not mentioned here
3%
What's ChatGPT?
17%
4555 票
MATLAB users come to Cody to learn MATLAB and the best way to learn is to learn from other community users. However, when you tried to see all solutions, you saw a message that you had to solve a new problem to unlock all the solutions or submit a solution of a smaller size. This is very confusing and we have been hearing this pain point from users.
Today, the Cody team is pleased to announce that players are able to see all solutions to a problem once they solve it correctly.
After solving a problem, you will see a button that says ‘View Community’s Solutions’, which will bring you to the list of all solutions.
Note that this is our first step in facilitating the learning aspect of Cody. We are actively working on improving the solutions list, so your input is valuable to us. Please let us know your comments or suggestions.
I want to understand this from the scratch, i will appreciate help and guidance very much.
Yes in MATLAB
18%
Yes but only in some other language
22%
Yes in MATLAB and other language(s)
7%
Not yet but would like to learn how
34%
No & don't foresee any need to yet
19%
4243 票
Every year, we show our appreciation to the top contributors by awarding two types of annual badges: Most Accepted badge and Top Downloads badge.
Most Accepted badge goes to the top 10 contributors whose answers received the most acceptances. Top downloads badge goes to the top 10 contributors with the most downloaded submissions.
In 2022, the recipients for Most Accepted are: @Walter Roberson, @Voss, @Star Strider, @Torsten, @Image Analyst, @Matt J, @KSSV, @Jan, @Stephen23, and @DGM.
The recipients for Top Downloaded are: @Cleve Moler, @Yarpiz, @John D'Errico, @Seyedali Mirjalili, @Rodney Tan, @Yair Altman, @Chad Greene, @Steve Miller, @Giampiero Campa, and @Scott Lowe
Congratulations and thank you again for your outstanding contribution in 2022!
When solving problems over on Cody, I can almost always view all solutions to a problem after submitting a correct solution of my own. Very rarely, however, this is not the case, and I instead get the following message:
This solution is locked. To view this solution, you need to provide a solution of the same size or smaller.
You may solve another problem from Community group to unlock all the solutions to this problem.
If this happens, then again, I can almost always rectify this by submitting a (correct) solution to a different problem (I take it that the Community group is the implicit group of all problems on Cody --- is it?). But sometimes that, too, fails.
So my question is, why? What are the criteria that determine when all solutions are, in fact, unlocked?
MathWorks is hosting the QIT Boston event to discuss Ethical AI for the LGBTQ+ community on its Lakeside campus, hosted by our own Heather Gorr, PhD.
AI is known to learn biases from the various sources that affects our daily lives, and in particular minority groups like LGBTQ+.
Join the discussion to what the impacts are, where the biases come from, and how to mitigate as you develop AI.
Sign up here
https://www.eventbrite.com/e/oit-boston-panel-discussion-ethical-ai-for-the-lgbtq-community-registration-496419814027
Simple question: I noticed there's a Modeling & Simulation Challenge Master badge over on Cody, but I can't find the corresponding group. So: where is it? Does it still exist at all?
Hi, having problems with this model. Tried changing all the capacitor values without any success. Any help/suggestions would be most welcome.
You provided 2,007 anwers and received 529 votes. Thank you for your contribution to the community!
MATLAB Central Team
There are two kinds of text data type (=string data type) in MATLAB:
Text1='aText'; % first one
Text2="aText"; % first one
The second one did not exist in "old" MATLAB versions but the first one only.
My questions are: 1) What was motivation of MathWorks programmers to introduce the Text Data Type of the second format?
Yes, I know the difference: length(Text1)=5 whilst length(Text2)=1; Text1(2)='T' but Text2(2) does not exist. The array Text3=['one' ; 'fifth'] does not exist too.
2) However, any explanations and recommendations how to apply the second sort in contrast to the first one?
3) Is there any way how to convert one sort to another one?
Thanks for explanation in advance!
Error: The server timed out while running and assessing your solution in MATLAB CODY. How do I resolve this? My code is correct. I have run it on PC. But, when i submit in CODY the server throws an error.
an undergraduate student
41%
in graduate school
28%
in academia (prof, staff, etc.)
11%
in industry or Non-Gov't Org. (NGO)
11%
in government or military
3%
self employed, retired, or hobbyist
6%
7627 票
4 weeks of contests is fun but intense. Next, we recommend 3 things to do as warm-down exercises.
To make future contests better and more appealing to you, we created a 1-minute survey to understand your experience. Your feedback is critical to us!
Dave Bulkin is a developer on the MATLAB Graphics and Charting Team. In the Blog post, @Dave B not only examines the code behind the leading entries, but also introduces you to some new visualization techniques.
Matt Tearle is from MathWorks Training Services Team. @Matt Tearle created this problem group to celebrate the 10th anniversary of Cody and the 2022 T20 World Cup (which happened to occur at the same time). Note that the problems can be done without the knowledge of cricket.
Thank you in advance and hope to see you in 2023!
I've now seen linear programming questions pop up on Answers recently, with some common failure modes for linprog that people seem not to understand.
One basic failure mode is an infeasible problem. What does this mean, and can it be resolved?
The most common failure mode seems to be a unbounded problem. What does this mean? How can it be avoided/solved/fixed? Is there some direction I can move where the objective obviously grows without bounds towards +/- inf?
Finally, I also see questions where someone wants the tool to produce all possible solutions.
A truly good exposition about linear programming would probably result in a complete course on the subject, and Aswers is limited in how much I can write (plus I'll only have a finite amount of energy to keep writing.) I'll try to answer each sub-question as separate answers, but if someone else would like to offer their own take, feel free to do so as an answer, since it has been many years for me since I learned linear programming.
また、以下のリストから Web サイトを選択することもできます。
南北アメリカ
- América Latina (Español)
- Canada (English)
- United States (English)
ヨーロッパ
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom(English)
アジア太平洋地域
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)