Main Content

Configure Root-Level Inport Blocks for C Code Generation

To use code that you generate from a model, you call generated entry-point functions. The calling environment and generated functions exchange input and output data, for example, as global variables or function arguments. Root-level Inport blocks (inports) constitute the input data of the interface. To integrate and deploy the generated code into applications, you can customize how the code generator produces the interface code, including how input data is declared and handled. Customizations can:

  • Minimize the modifications that you must make to existing code.

  • Generate stable interfaces that do not change or minimally change when you make changes to your model.

  • Generate code that exchanges data more efficiently (for example, by using pointers and pass-by-reference arguments for nonscalar data).

Enable and Trigger blocks (function-call inports) also load data into a system from outside the system. From a code generation perspective, these modeling elements are exported functions. For an exported function, the code generator produces an entry-point function, which you can configure. See Configure Generated C Function Interface for Model Entry-Point Functions.

For code generation, examples show how to customize the inport interface for model ConfigurationInterface. You can configure code mappings by using the Code Mappings Editor – C or code mappings API (coder.mapping.api.CodeMapping).

Choose Customization Options for Inport Interface

By default, root-level inports in a model appear in generated code as fields of a global data structure named model_ExtU. Based on your code interface requirements, decide whether to customize generation of root-level inport data. If you do not configure customizations, the code generator determines whether to eliminate or change the representation of inports in generated code for optimization purposes. If you configure customizations, decide:

  • Whether to set up a default configuration

    If a model includes a significant number (for example, more than 10) of root-level inports, it is more efficient to configure the inports with a default setting, and then override that setting for special cases. If the model includes a few root-level inports that have unique source, naming, or placement requirements, consider configuring the inports individually.

  • How to declare and handle root-level inport data in the generated interface

    • As separate global variables

    • To read input data from global variables defined in external code

    • For referenced model inports, as global variables (void-void)

    • As calls to access functions. Requires Embedded Coder®

    • As entry-point function arguments. Requires Embedded Coder

    For more information about these options, see Control Data and Function Interface in Generated Code.

Other considerations include whether to:

For a list of interface requirements that are relevant to inports with corresponding storage classes and storage class properties, see Choose Storage Class for Controlling Data Representation in Generated Code.

For example model ConfigurationInterface, inport interface requirements are:

  • Use project type definition DBL_FLOAT defined in header file exDblFloat.h.

  • Get data for inport In1 from header file exInDataMem.h. The data is used for computing a value that is stored in memory, and then used in an if-else condition of code generated for the Switch block.

  • Get data elements for inports In2, In3, and In4 from header file exInDataLut.h. The data is used in lookup tables Table1 and Table2.

  • Variables representing the inports in the generated code must be named input1, input2, input3, and input4.

For this example, configure inports in ConfigurationInterface to meet these code generation requirements.

Configure Default Code Generation Settings for Root-Level Inports

A default code generation setting for root-level inports can reduce the effort of preparing a model for code generation, especially if a model has a significant number of inports. Choose configuration settings once, and the code generator applies those settings to the inports across the model. Simulink® stores the default configuration as part of the model.

Consider configuring default code generation settings for model root-level inports if your model uses multiple root-level inports that do not have unique requirements or uses a shared Embedded Coder Dictionary.

This example shows how to use the Code Mappings Editor – C to configure default settings for root-level inports for model ConfigurationInterface. Specify an external header file that declares input data. Three of the four root inports read input from variables declared in header file exInDataLut.h. Set that header file as the default input source for inports.

  1. Open example model ConfigurationInterface. Save a copy of the model to a writable location.

    Simulink model to use for learning how to configure signals for code generation.

  2. Open the Embedded Coder app.

  3. In the C Code tab, select Code Interface > Default Code Mappings.

  4. In the Code Mappings editor, under Inports and Outports, select category Inports. Set the default storage class to ImportFromFile.

  5. Click the Icon to configure additional code mapping properties icon, set Header File to exInDataLut.h.

    Code Mappings editor with Data Defaults tab selected, Inports and Outports tree node expanded, and storage class for Inports set to ImportFromFile. Property Inspector with HeaderFile property set to exInDataLut.h

  6. Save the model.

Configure Code Generation Settings for Individual Root-Level Inports

You can configure individual root-level inports for code generation. For example, if a model has two root-level inports that have unique code generation requirements, configure the inports individually. Or, if you configure default settings for inports, configure individual inports to use the default settings or unique settings.

If your model meets at least one of these criteria, consider configuring code generation settings for root-level inports individually:

  • Uses multiple inports that have unique requirements.

  • Uses few inports.

  • Has a default configuration for inports and you need to override the configuration for some specific inports.

This example shows how to use the Code Mappings editor to override the default code generation configuration for one of the inports in model ConfigurationInterface. In the preceding example, you set the default storage class for inports to ImportFromFile. The model requires that inport In1 read input data from a global variable instead of a global variable pointer.

The example also shows how to configure identifiers that the code generator uses for naming the four inports in the generated code. You can specify code generation identifiers, for example for integration, without having to modify the model design.

  1. If you have not already done so, complete the steps in Configure Default Code Generation Settings for Root-Level Inports.

  2. In the Code Mappings editor, click the Inports tab. The editor lists the names of Inport blocks and bus elements that are in the model. If a port resolves to a signal object, a resolve-to-signal-object icon appears to the right of the element name. The storage class for each inport is set to Auto, which means that the code generator might eliminate or change the representation of relevant code for optimization purposes. If optimizations are not possible, the code generator applies the model default configuration. For this example, the model default configuration specifies storage class ImportedFromFile.

    • To avoid optimizations and force the code generator to use the default configuration, set the storage class to Model default.

    • To override the default configuration, specify the storage class that meets the code generation requirements for that inport.

  3. Configure the code generator to apply the default storage class setting to inports In2, In3, and In4. Select the rows for the three inports. Then, for one of the selected inports, set the storage class to Model default: ImportFromFile.

    Code Mappings editor with Inports tab selected, signals In2, In3, and In4 selected, and storage class being set to Model default: ImportFromFile.

    The storage class for the three selected inports changes to Model default: ImportFromFile.

  4. For inport In1, override the default storage class setting. Set the storage class to ImportFromFile. Click the Icon to configure additional code mapping properties icon and set Header File to exInDataMem.h.

    Code Mappings editor with Inports tab selected, signal In1 selected, and storage class being set to ImportFromFile. Mapping Inspector with HeaderFile property set to exInDataMem.h.

  5. Configure code identifiers for the inports so that the interface argument names in the generated code match the interface names in the external header and definition files. In the Code Mappings editor, select the row for each inport. Click the Icon to configure additional code mapping properties icon and set the Identifier property to these values.

    InportCode Identifier
    In1input1
    In2input2
    In3input3
    In4input4
  6. Save the model.

  7. Generate and view the code. For example, in ConfigurationInterface.c find where variables input1, input2, input3, and input4 are used in the step entry-point function.

    void ConfigurationInterface_step(void)
    {
      mode = ((input1 > 10.0) || (input1 < -10.0));
    
      if (mode) {
        output = (real_T)K1 * look1_binlc(input2, (const MYTYPE *)&Table1.BP[0], (
          const MYTYPE *)&Table1.Table[0], 10U);
      } else {
        output = ConfigurationInterface_DW.X;
      }
    
      ConfigurationInterface_DW.X = look2_binlc(input3, input4, (const MYTYPE *)
        &Table2.BP1[0], (const MYTYPE *)&Table2.BP2[0], (const MYTYPE *)
        &Table2.Table[0], rtCP_Table2_maxIndex, 3U);
    }
    

Configure Code Generation Settings for Root-Level Inports Programmatically

To automate configuration of root-level inports for code generation, use the programming interface for code mappings. For example, when creating custom block libraries or part of an application test environment, use the programming interface to automate data configuration.

This example shows how to use the programming interface to configure default settings for root-level inports for model ConfigurationInterface. Specify an external header file that declares input data. Three of the four root-level inports read input from variables declared in header file exInDataLut.h. You set that file as the default header file. Then, you override the default code generation configuration for In1, which requires that input data be read from header file exInDataMem.h.

In addition, you configure code identifiers for the inports so that global variable names in the generated code match the variable names defined in an external file.

  1. Open the example model.

    openExample("ConfigurationInterface")
    
  2. Create object cm by calling function coder.mapping.api.get. The object stores the data and function code generation configuration for model ConfigurationInterface.

    cm = coder.mapping.api.get("ConfigurationInterface");
    
  3. Configure default settings for inports by calling function setDataDefault. For the arguments, specify these values:

    • The object returned by coder.mapping.api.get

    • Inports for the default category

    • Property name StorageClass with property value ImportFromFile

    • Property name HeaderFile with property value exInDataLut.h, the name of the external file that contains the input data

    setDataDefault(cm,"Inports","StorageClass","ImportFromFile","HeaderFile","exInDataLut.h")
    
  4. Verify your default configuration for inports. Issue two calls to getDataDefault that specify the object returned by coder.mapping.api.get and category Inports. In the first call, specify the third argument as property StorageClass. In the second call, for the third argument, specify HeaderFile.

    getDataDefault(cm,"Inports","StorageClass")
    
    ans =
    
        'ImportFromFile'
    
    getDataDefault(cm,"Inports","HeaderFile")
    
    ans =
    
        'exInDataLut.h'
    
  5. Override the default inport configuration for inport In1. The requirements for that inport differ from requirements of the other three inports.

    By default, Simulink sets the storage class for individual inports to Auto. When the storage class is Auto, the code generator:

    • Determines whether to eliminate the data from the generated code for optimization purposes.

    • If retaining the data, determines how to efficiently represent the data in the generated code, taking into account default configuration settings.

    To control the storage class and header file configuration for an inport, configure settings for the inport with function setInport. Configure code generated for inport In1 to read input data from global variables defined in external header file exInDataMem.h, as specified in the requirements. Issue two calls to function setInport that specify the object returned by coder.mapping.api.get and Inport block named In1. In the first call, also specify property name StorageClass and property value ImportFromFile. In the second call, specify property name HeaderFile and property value exInDataMem.h.

    setInport(cm,"In1","StorageClass","ImportFromFile")
    setInport(cm,"In1","HeaderFile","exInDataMem.h")
    
  6. Verify your configuration for inport In1 by calling function getInport.

    getInport(cm,"In1","StorageClass")
    
    ans =
    
        'ImportFromFile'
    
    getInport(cm,"In1","HeaderFile")
    
    ans =
    
        'exInDataMem.h'
    
  7. Configure the code generator to apply your default inport settings to inports In2, In3, and In4. For each inport, call function setInport. Specify the object returned by coder.mapping.api.get, the Inport block name, property name StorageClass, and property value Model default.

    setInport(cm,"In2","StorageClass","Model default")
    setInport(cm,"In3","StorageClass","Model default")
    setInport(cm,"In4","StorageClass","Model default")
    
  8. Verify your configuration changes for inports In2, In3, and In4 with calls to function getInport.

    getInport(cm,"In2","StorageClass")
    
    ans =
    
        'Model default'
    
    getInport(cm,"In3","StorageClass")
    
    ans =
    
        'Model default'
    
    getInport(cm,"In4","StorageClass")
    
    ans =
    
        'Model default'
    
  9. Configure code identifiers for the inports so that the global variables that represent inports in the generated code match the variable names in the external definition file. For each inport, call function setInport. Specify the object returned by coder.mapping.api.get, the Inport block name, property name Identifier, and one of these property values.

    InportCode Identifier
    In1input1
    In2input2
    In3input3
    In4input4
    setInport(cm,"In1","Identifier","input1");
    setInport(cm,"In2","Identifier","input2");
    setInport(cm,"In3","Identifier","input3");
    setInport(cm,"In4","Identifier","input4");
    
  10. Verify your configuration changes for the inports by using calls to function getInport.

    getInport(cm,"In1","Identifier")
    
    ans =
    
        'input1'
    
    getInport(cm,"In2","Identifier")
    
    ans =
    
        'input2'
    
    getInport(cm,"In3","Identifier")
    
    ans =
    
        'input3'
    
    getInport(cm,"In4","Identifier")
    
    ans =
    
        'input4'
    
  11. Save the model.

  12. Generate and view the code. For example, in ConfigurationInterface.c find where variables input1, input2, input3, and input4 are used in the step entry-point function.

    void ConfigurationInterface_step(void)
    {
      mode = ((input1 > 10.0) || (input1 < -10.0));
    
      if (mode) {
        output = (real_T)K1 * look1_binlc(input2, (const MYTYPE *)&Table1.BP[0], (
          const MYTYPE *)&Table1.Table[0], 10U);
      } else {
        output = ConfigurationInterface_DW.X;
      }
    
      ConfigurationInterface_DW.X = look2_binlc(input3, input4, (const MYTYPE *)
        &Table2.BP1[0], (const MYTYPE *)&Table2.BP2[0], (const MYTYPE *)
        &Table2.Table[0], rtCP_Table2_maxIndex, 3U);
    }
    

Choose Storage Class and Storage Class Properties for Root-Level Inports

Depending on your code generation requirements, choose from these storage classes to configure code generation for root-level inports. The list of storage classes is defined in the coder dictionary.

RequirementsStorage Class for Default MappingsStorage Class for Individual Mappings
Enable optimizations, potentially generating more efficient code. Auto
For data elements that cannot be optimized, represent data as a field of a standard data structure.Default 
Prevent optimizations from eliminating storage for a data element and use the default mapping for the data element category. Model Default,
When using a shared coder dictionary, select the dictionary default for data elements that you do not want the code generator to optimize.Dictionary Default 
Generate a structure that stores Boolean, fixed-point, or integer data in named bitfields. Bitfield
Generate a global variable definition and declaration that have the volatile type qualifier.Volatile (See Const, Volatile, and ConstVolatile)Volatile (See Const, Volatile, and ConstVolatile)
Generate a global variable definition and declaration.ExportedGlobalExportedGlobal
Generate a global variable definition and declaration to a specified file.ExportToFileExportToFile
Generate code that interacts with data by calling your custom accessor functions.GetSetGetSet
Generate code that reads from and writes to a global variable or global variable pointer defined by your external code.ImportedExtern, ImportedExternPointerImportedExtern, ImportedExternPointer
Read input data for the inport from a specified external header file.ImportFromFileImportFromFile
Generate variables that are local to functions.LocalizableLocalizable
Generate a global structure that has a name, which you can specify. Struct
Generate a global variable that enables buffer reuse. Reusable
Generate variables for single-instance data and generate structures for multi-instance data.MultiInstanceMultiInstance

The list of available storage classes might include other project-specific storage classes defined in an Embedded Coder Dictionary. If you have special requirements that are not met by the listed storage classes and you have Embedded Coder software, you can define a storage class. See Define Service Interfaces, Storage Classes, Memory Sections, and Function Templates for Software Architecture.

For an individual inport, use the Identifier storage class property to configure a name for the variable representing the inport in the generated code. If you leave the Identifier property blank, the code generator uses the name of the signal attached to the Inport block. If the signal label is empty, the code generator uses the name of the Inport block.

With Embedded Coder, depending on the storage class that you choose, you can also configure these properties.

PropertyDescriptionStorage Classes
DefinitionFileSource definition file that contains definitions for global data, which is read by the inport and external codeExportToFile and Volatile
GetFunctionInport appears in the generated code as a call to a specified get functionGetSet
HeaderFileSource header file that contains declarations for global data that is read by the inport and external codeExportToFile, GetSet, ImportFromFile, and Volatile
Memory Section (default inport configuration only)Memory section that contains data read by the inportDefault
OwnerCode generator places the definition for inports in the code generated for one of multiple models in a model hierarchy that share definitions. You must select the model configuration parameter Use owner from data object for data definition placement. See Control Placement of Global Data Definitions and Declarations in Generated Files.ExportToFile and Volatile
PreserveDimensionsCode generator preserves dimensions of inport data that is represented in generated code as a multidimensional array. You must set model configuration parameter Array layout to Row-major. See Preserve Dimensions of Multidimensional Arrays in Generated Code.ExportToFile, GetSet, ImportFromFile, Localizable, and Volatile
SetFunctionInport appears in the generated code as a call to a specified set function.GetSet
StructNameName for a structure in the generated code for inport.BitField and Struct

See Also

|

Related Topics