このページは前リリースの情報です。該当の英語のページはこのリリースで削除されています。
ハードウェア-ソフトウェア協調設計
R2026aCommunications Toolbox™ Support Package for USRP Embedded Series Radio を使用すると、Simulink® で SDR アルゴリズムを設計し、USRP Embedded Series 無線機で設計のプロトタイプを作成できます。ARM® プロセッサと Zynq® システム オン チップ (SoC) で構成される FPGA ファブリックとの間で分割されているハードウェア-ソフトウェア (HW/SW) 協調設計の実装を展開するか、FPGA ファブリックのみをターゲットにして設計のプロトタイプを作成できます。ワークフローは Simulink でのみ使用できます。
関数
sdrdev |
ブロック
| E3xx Receiver |
| E3xx Transmitter |
トピック
- Hardware-Software Co-Design Overview (SoC Blockset)
Learn the basics of the hardware-software co-design feature in this support package and its software requirements.
- Installation for Hardware-Software Co-Design (SoC Blockset)
Install and configure additional support packages and third-party tools required by hardware-software co-design workflow.
- Hardware-Software Co-Design Workflow (SoC Blockset)
Deploy partitioned hardware-software co-design implementations for SDR algorithms.
- Guidelines for Configuring the Software Interface Model (SoC Blockset)
Configure your model for continuous and packet-based transmission and reception.
- System Timing (SoC Blockset)
Explore ARM processor scheduler options for the software interface model.
- FPGA Targeting Workflow (SoC Blockset)
Prototype SDR algorithms on the FPGA fabric only.
トラブルシューティング
Troubleshooting Hardware-Software Co-Design (SoC Blockset)
Resolve issues encountered while using the hardware-software co-design workflow.