メインコンテンツ
結果:
I have submitted a problem in cody some days back. Now it is not showing in my profile. Initially it was accepted and some people submitted the solutions also, however It has been removed after that, are there some guidelines which I am not following?
Hi everyone
I am a new of this community and I very interested in this forum and Matlab.I am trying to submit a soultion but as tiltle my code has a built-in function so the test systerm dont reconisie it.It run completely ok on my computer.
This is problem
This is my solution
function [boOut] = BoIfPointInPoly(PolyMatrix,p_test)
%Summary of this function goes here
%{
if we draw a line from test point to a central point of a side of The polygon
then we extend that line to the furthest point of the polygon ensure that
line go through all side of Polygon in 1 direction.I call that line is line_test
Next find number of intersert of line test and all sides w polyxpoly
function
num interset point is odd mean p_test inside
num interset point is even mean p_test outside
this solution go from the concept that if a line go in from a side it has go out
from other side.So if it go in but not go out that mean it start from
inside.
%}
% Detailed explanation goes here
%line from p test throuh central of a side to furthest point of polygon
%find vector
V = ((PolyMatrix(1,:) + PolyMatrix(2,:)) /2) - p_test ;
%draw that vector to furtest point
pend = p_test + V * max(PolyMatrix(:));
%with multi of V and biggest element I assume that line will go all out the
%polygon which ensure out logic will right
line_test = [p_test ; pend];
disp('Our line test\n');
disp(line_test);
%find interst point
p_inter = polyxpoly(PolyMatrix(:,1),PolyMatrix(:,2),line_test(:,1),line_test(:,2));
%find number of interset (row)
[numIntere,trash] = size(p_inter);
disp('Number of interest point:');
disp(numIntere);
%determine in or out
if (rem(numIntere,2) == 0)
boOut = 0;
else
boOut = 1;
end
end
Can anyone has solution.
Introduction
Comma-separated lists are really very simple. You use them all the time. Here is one:
a,b,c,d
That is a comma-separated list containing four variables, the variables a, b, c, and d. Every time you write a list separated by commas then you are writing a comma-separated list. Most commonly you would write a comma-separated list as inputs when calling a function:
fun(a,b,c,d)
or as arguments to the concatenation operator or cell construction operator:
[a,b,c,d]
{a,b,c,d}
or as function outputs:
[a,b,c,d] = fun();
It is very important to understand that in general a comma-separated list is NOT one variable (but it could be). However, sometimes it is useful to create a comma-separated list from one variable (or define one variable from a comma-separated list), and MATLAB has several ways of doing this from various container array types:
struct_array.field % all elements
struct_array(idx).field % selected elements
cell_array{:} % all elements
cell_array{idx} % selected elements
string_array{:} % all elements
string_array{idx} % selected elements
Note that in all cases, the comma-separated list consists of the content of the container array, not subsets (or "slices") of the container array itself (use parentheses to "slice" any array). In other words, they will be equivalent to writing this comma-separated list of the container array content:
content1, content2, content3, .. , contentN
and will return as many content arrays as the original container array has elements (or that you select using indexing, in the requested order). A comma-separated list of one element is just one array, but in general there can be any number of separate arrays in the comma-separated list (zero, one, two, three, four, or more). Here is an example showing that a comma-separated list generated from the content of a cell array is the same as a comma-separated list written explicitly:
>> C = {1,0,Inf};
>> C{:}
ans =
1
ans =
0
ans =
Inf
>> 1,0,Inf
ans =
1
ans =
0
ans =
Inf
How to Use Comma-Separated Lists
Function Inputs: Remember that every time you call a function with multiple input arguments you are using a comma-separated list:
fun(a,b,c,d)
and this is exactly why they are useful: because you can specify the arguments for a function or operator without knowing anything about the arguments (even how many there are). Using the example cell array from above:
>> vertcat(C{:})
ans =
1
0
Inf
which, as we should know by now, is exactly equivalent to writing the same comma-separated list directly into the function call:
>> vertcat(1,0,Inf)
ans =
1
0
Inf
How can we use this? Commonly these are used to generate vectors of values from a structure or cell array, e.g. to concatenate the filenames which are in the output structure of dir:
S = dir(..);
F = {S.name}
which is simply equivalent to
F = {S(1).name, S(2).name, S(3).name, .. , S(end).name}
Or, consider a function with multiple optional input arguments:
opt = {'HeaderLines',2, 'Delimiter',',', 'CollectOutputs',true);
fid = fopen(..);
C = textscan(fid,'%f%f',opt{:});
fclose(fid);
Note how we can pass the optional arguments as a comma-separated list. Remember how a comma-separated list is equivalent to writing var1,var2,var3,..., then the above example is really just this:
C = textscan(fid,'%f%f', 'HeaderLines',2, 'Delimiter',',', 'CollectOutputs',true)
with the added advantage that we can specify all of the optional arguments elsewhere and handle them as one cell array (e.g. as a function input, or at the top of the file). Or we could select which options we want simply by using indexing on that cell array. Note that varargin and varargout can also be useful here.
Function Outputs: In much the same way that the input arguments can be specified, so can an arbitrary number of output arguments. This is commonly used for functions which return a variable number of output arguments, specifically ind2sub and gradient and ndgrid. For example we can easily get all outputs of ndgrid, for any number of inputs (in this example three inputs and three outputs, determined by the number of elements in the cell array):
C = {1:3,4:7,8:9};
[C{:}] = ndgrid(C{:});
which is thus equivalent to:
[C{1},C{2},C{3}] = ndgrid(C{1},C{2},C{3});
Further Topics:
MATLAB documentation:
Click on these links to jump to relevant comments below:
Dynamic Indexing (indexing into arrays with arbitrary numbers of dimensions)
Summary
Just remember that in general a comma-separated list is not one variable (although they can be), and that they are exactly what they say: a list (of arrays) separated with commas. You use them all the time without even realizing it, every time you write this:
fun(a,b,c,d)
I'm trying to solve one problem in Cody, but a function 'fmincon' is not recognized by the online compiler. Is there any way to use functions in optimization toolbox in Cody?
I already solved some problems in Cody, why does he not increase my points or allow me to earn badges?
I need to put a number of problems on MATLAB cody under same Problem group, as many other people have done.
Can anyone please help me on this.
I created a problem in Cody that approximates e. To test the user's solution, I compare their solution to e. What I want to do instead is compare the user's solution to my reference solution. The question is how do I call the reference solution in the test suite?
This is currently my test suite.
sol=exp(1);
y_correct = playgame();
assessVariableEqual('y_correct',sol);
I created several problems recently in CODY. Some of them got removed automatically. I was curious as to why.
It is possible that the problems used latex in their description, so I am not sure if that was the reason they got rejected by the cody server.
I created some problems last night and created a group too. All those are now missing.
Also my ranking progress, activites, badges earned last night are missing too.
Hi all,
I hope everyone is doing well and keeping safe. I was wondering, are there any Cody challenges for Simulink these days?
I saw a post from 2015 (https://blogs.mathworks.com/simulink/2015/08/07/modeling-and-simulation-challenge-in-cody/) and it seems there was a Simulink or "Modeling and Simulation Challenge" problem group, but I couldn't find this group anymore. Perhaps I missing something?
Thank you beforehand.
Tungky
I see this solution on the Cody solutions list. Solution 1949216
I am puzzled as to how this could possibly be rated as correct (size 48)
(BTW - I am pretty sure I saw this, or similar, before.)
function ans = fileread(varargin)
' ';
a=1;
b=3;
a=1;
b=3;a=1;
b=3;a=1;
b=3;a=1;
b=3; end
It's pretty odd how a solution that uses more characters than usual can be the "leading solution" of a Cody problem and have the least size. Compare these two codes that find the sum of integers from 1 to 2^x, which one uses fewer characters, thus should be the better solution?
function y = sum_int(x)
regexp '' '(?@y=sum(1:2^x);)'
end
function ans = sum_int(x)
sum(1:2^x)
end
If a large number of fair N-sided dice are rolled, the average of the simulated rolls is likely to be close to the mean of 1,2,...N i.e. the expected value of one die. For example, the expected value of a 6-sided die is 3.5.
Given N, simulate 1e8 N-sided dice rolls by creating a vector of 1e8 uniformly distributed random integers. Return the difference between the mean of this vector and the mean of integers from 1 to N.
function dice_diff = loln(N)
A=randi([1,N],1e8,1)
M=mean(A)
B=1:N
m=mean(B)
dice_diff =abs(M-m);
end
Here is my code, but it can't work out as it needs too long time to creat A.
In problem 16 I used the following solution:
function b = nearZero(a)
b = max(a(imdilate(a == 0, [1 1 1])));
end
It is working pretty well on mathlab but when I submit my answer to cody, the following error is generated:
Undefined function 'imdilate' for input arguments of type 'double'.
Error in nearZero (line 2)
b = max(a(imdilate(a == 0, [1 1 1])));
Error in Test1 (line 3)
assert(isequal(nearZero(a),b))
In number 5, its written that the correct answer is c = 1 but the secomnd person has more change than the first person, therefor the correct answer should be 2.Likewise in number 6.
Hi, I'm trying to solve this problem but I'm getting an error so far.
Problem:
Given a vector a, find the number(s) that is/are repeated consecutively most often. For example, if you have
a = [1 2 2 2 1 3 2 1 4 5 1]
The answer would be 2, because it shows up three consecutive times
What I've written so far (not done):
a = [1 2 2 2 1 3 2 1 4 5 1];
[x,y] = size(a);
counter = zeros(1,10);
if x == 1
for i=1:1:y
if a(i) == a(i+1)
counter(a(i)) = counter(a(i))+1
end
end
else
for i=1:1:x
if a(i) == a(i+1)
counter(a(i)) = counter(a(i))+1
end
end
end
But it says "error" in the line of "if a(i) == a(i+1)". I noticed that it creates a variable called "i" which value is 11, but it should create a vector from 1 to 11. What's wrong here?
I know my solution might not be in the right direction or something, but please don't tell me anything!
Thanks in advance
There are multiple ways to create a graphical user interface (GUI) in Matlab. Which method is the best depends on multiple factors: the complexity of the project, to what extent it should be a long-term solution, on what releases your GUI should work, your available time, your skill level, and probably other factors I'm forgetting.
To keep the thread clear I'll attempt to provide a short outline a few ways in this question, and leave the details for the answers. (@anyone with editing privileges: feel free to update the section below if I missed something important and am slow in editing this question)
---------------------------------------------------------------------------------------------------
GUIDE
GUIDE is probably the first tool new users will encounter. It is very useful for quickly putting something together, but it is otherwise fairly limited. It requires maintaining (and distributing) both a .m and a .fig file. Note that the GUIDE environment will be removed in a future release. After GUIDE is removed, existing GUIDE apps will continue to run in Matlab but they will not be editable in GUIDE. If you're starting a new GUI, don't use GUIDE. If you're updating an existing GUIDE GUI, migrate it to AppDesigner. In R2021a the first step for this removal was taken: all templates except the blank template have been removed.
GUILT
Although I haven't had a detailed look myself, it seems a list like this is not complete without at least mentioning the GUI Layout Toolbox, which is available on the file exchange and offers a lot of customization options.
Programmatic GUIs
You can bypass GUIDE and use the normal figures and functions like uicontrol to build GUIs from code. This makes the design less visual, but more flexible for future additions.
App Designer
The official successor to GUIDE, AppDesigner is not based on functions, but works similar to a class. It uses uifigure and mostly uses graphical elements that are incompatible with 'normal' GUIs that are created with a figure (or .fig).
Dear Sir or Madam
I tried to solve the cody-problem namend in the title.
Could you pleas tell me how I should name the vektor/variable in which it should be presentet?
Thank you for helping me.
Yours faithfully
Jann Borlinghaus
I wrote a Cody problem, but I want to prevent people from using tricks to get a false "best" solution.
For example, many people do something like the following:
regexp '' '(?@"CODE HERE)';
in order to get the size of their program down to something quite small. I want to prevent this. I have seen people using some weird tests to try to block this, but I don't know how they work and when I try to copy them they fail.
Would it make sense that, in order to enhance coding experience with practice exercises, each section of the Matlab Academy courses reference specific CODY problems related to that section so the CODY problems can be used in parallel with the structure of the Matlab Academy courses?
また、以下のリストから Web サイトを選択することもできます。
南北アメリカ
- América Latina (Español)
- Canada (English)
- United States (English)
ヨーロッパ
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom(English)
アジア太平洋地域
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)