結果:

I have a datasheet of an induction motor (as figure below). I want to simulate it on matlab/simulink, but I don't know it's parameters (Lls, Llr, Lm, Rr, Rs).

I tried to search about open circuit test and blocked rotor test to determine these parameters, but some of information doesn't appear on datasheet and I don't have the real motor to test on it (datasheet is only think I have).

Could someone help me with this?

Assignments, quizzes, midterms, finals, grades, joys of success, the anxiety of low grades. Sounds like a typical cycle that students go through, right? Sometimes, all that hustle and bustle makes students forget that coding could be fun! Dr. Amin Rahman teaches AMATH 301 at the University of Washington. Many engineering students take this course and learn MATLAB in the course. He was looking for ways to keep students engaged and remind them that coding is fun. To achieve this goal Dr. Rahman and I set up a small competition in MATLAB Grader. Dr. Rahman selected several problems from MATLAB Grader problem collections. Students competed in this optional competition without the pressure of grades. They submitted their solutions; their submissions were automatically graded using MATLAB Grader and they got instant feedback. Green checkmarks for the correct answers empowered students and gamified coding. With the feedback they got, they continuously improved their code.

Prizes? Aside from the joys of coding in MATLAB, students won MathWorks-branded items like t-shirts, hats, and bags and proudly wore them as you can see in Dr. Rahman’s tweet.

Interested in using MATLAB Grader? Interested in accessing MATLAB Grader problem collections? Like to brainstorm ideas to make coding more fun? Reach out to us! We are here to help. Any creative ideas to make courses more engaging? Please share your ideas with this community!

If you are interested in live script lecture notes in the following areas, take a look at the short course ( Advanced MATLAB for Scientific Computing ) developed at Stanford. You can also download the required data for the examples from the course GitHub page.

• MATLAB Fundamentals
• Graphics and Data Visualization
• Efficient Code Writing
• System and File Manipulation
• Big Data Handling
• Numerical Linear Algebra
• Numerical Optimization
• Symbolic Toolbox, ODE, and PDE
• Statistical and Machine Learning
• Deep Learning
• Object-Oriented Programming
• Using MATLAB with Other Programming Languages
• Image Processing, Computer Vision, and Image Acquisition
• Signal Processing, Audio, and DSP System

In many universities, introductory programming is taught as a foundation course. Students from different departments are usually brought together to learn to program in these foundation courses. Their home departments may have a programming language preference and that preference may change from department to department. Some universities either strictly teach one language in a single course, some of them teach multiple languages in the same course and give students the flexibility to choose their language for the assignments and projects. How can we make students multilingual when it comes to programming? Is there a way to teach multiple languages in a fair light, side by side without creating a new course or sacrificing one language to teach the other one? Dr. Nathan Kutz from the University of Washington found a creative way to teach MATLAB and Python side by side in his AMATH 301 course. This course is an introductory programming course at the University of Washington and almost all engineering students take it. Do you wonder how Dr. Kutz taught this course? Check out these recordings and course resources! They can be utilized in an in-person or a distance learning setting:

• Main Course Page
• Sample course videos (MATLAB and Python side by side)

Are you looking for ways to keep your students engaged in a virtual setting? Would you like to spice up your courses with hands-on projects? Using Arduino Engineering Kit, you can achieve these. Due to COVID-19, many instructors started to look for creative ways of giving students a lab experience. Some of them chose to create virtual labs, some of them designed hardware projects with low-cost hardware or integrated hardware projects kits to their curriculum. If you are interested in how Dr. Azadi from San Francisco State University used Arduino Engineering Kit during the pandemic to teach his Mechatronics course, check out these articles:

• Creating a Virtual Hands-on Mechatronics Course with MATLAB, Simulink, and the Arduino Engineering Kit
• Keeping things creative: Real-world learning from a remote perspective

I need to model a brushless motor for which I only have the data of voltage, power, speed, nominal torque, starting torque, max current and total weight, which moves a bicycle. I have studied the Permanent Magnet Synchronous Machine power_pmmotor Simulink example, but I do not have all the required data. My question is whether it is possible to make an approximate model with my few data. I guess some data could be assumed, but I don't know what typical values ​​would be correct. I would greatly appreciate any suggestion. My best regards.

Hi,

I am new to Matlab and looking to model complete EPS system starting with battery modelling. I have seen videos where the modelling is explained but looking for a one which can teach me from the scratch.

Hi, currently I'm studying about DC-DC Boost converter with controller. After I applied the step time, the output voltage supposed to follow the step time, but there is some delay in the simulation results after I applied the "step time" in the step input block. Can someone help, why this delay occur? Please see the attached pictures. Thanks

As per data sheet for VIPER22A, the product is obsolete.

For UC3843A you will have to refer to the data sheet, link given below: https://www.ti.com/lit/ds/symlink/uc3843a.pdf?ts=1637624394197&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FUC3843A

For UC3843A, the reference output voltage is 5 V and the normal output voltage is 13.5 V.

After repairing the power supply of a big water buffalo PC150NCA, now all the parts found to be broken are replaced, but the power-on output 12V is only 4.2V. The original power supply block is UC3843B, which is not sold locally. I can only buy a UC3843A replacement . I don’t know if the low output voltage has anything to do with this (the optocoupler and the 431 voltage regulator block have also been replaced)

Attention all Controls Professors, Teaching Assistants, and Students!

The Virtual Hardware and Labs for Controls by Brian Hong is an absolute must-have from the MATLAB Central File Exchange. With the help of Simscape for physical modelling and simulation of mechatronic systems,

• students can use the interactive experiments to teach themselves some of the concepts of control theory in a learn by doing approach.
• professors and TA’s can use this to replace or augment actual lab work.

With tightening budgets and/or in person class restrictions this can help you transfer these vital skills to the students in a fun manner. Here is an overview of the available modules:

https://www.mathworks.com/matlabcentral/fileexchange/100064-virtual-hardware-and-labs-for-controls

If you have any questions feel free to leave a comment below and I’ll get back to you.

Hi DLC, in case you haven't seen it already, Dr. Dennis Dahlquist and Dr. Zekeriya Aliyazicioglu recently developed a collection of Virtual Labs in Electric Circuits . Please feel free to explore and share your thoughts!

With the switching power supply made by VIPER22A scheme , the 5V output always has noise, and the ripple exceeds 200MV after loading. How to change it? 1. 220VAC input, two outputs, 24V and 5V output are noisy, the ripple after 5V load is more than 200MV, 5V is connected with an LDO to 3.3V, and the measured 3.3V is also noisy, and the LDO heats up seriously. Change The LDO remains unchanged. 2. It is suspected that the load current is large, but I changed a circuit board with the same scheme and found that there is no noise. Although there are ripples, it is not very hot. 3. In addition, directly use a 5V adapter to convert to 3.3V through the same LDO. problem. How to change the device in this figure? 4. For hardware novices, the transformer will not be changed temporarily, and I hope to improve it by adjusting other devices.

Hi Distance Learning Community members, if you are looking for content in Descriptive Statistics and Probability Distributions for teaching in a course or just brushing up on the concepts yourself, check out these Live Scripts developed by Dr. Ward Nickle from Humboldt State University. If you are interested, this material is also available in Japanese . Enjoy and looking forward to hearing your thoughts!!

Several educators worldwide use MATLAB Grader to scale assessments and automatically grade MATLAB coding assignments. MATLAB Grader can be used in any learning environment, for both formative assessments with automated feedback and summative assessments, such as quizzes and exams.

Educators often revise and update their MATLAB Grader problems. They may sometimes want to revisit a past version of a problem, such as to debug an assessment test error. Instructor users can now browse the version history for a specific problem and see draft and final versions.

Note that the versions are read-only and rollback is not supported at this time. However, you can copy code or descriptions and update the problem accordingly.

Get started with MATLAB Grader. If you are new to it, watch the MATLAB Grader Overview video and try the interactive Teaching with MATLAB online course (Section 6 is about MATLAB Grader).