結果:
Hello Community,
For E vehicle application to control the speed and torque of PMSM motor I am implementing FOC algorithm. We know that to arrive at Speed set point we have speed control loop which is outer loop, Further PI CONTROLLER of speed loop will give reference for Iq current which regulates the current using current loop. My question is 1.How to arrive at Torque set point?
2. Is speed control using FOC is enough or we should implement Torque control algorithm also?
3. should we have speed mode and Torque mode selection in case of constant speed requirement during cruise mode and high torque requirement during uphill situation respectively
4. To arrive at Torque set point what is the relation or transfer function to tune PI controller for Torque loop?
Please give your valuable inputs and answers, thanks in advance
Two fun community contests: MATLAB Mini Hack 2022 and Cody 10th Anniversary will start on Oct 3rd, 2022. Are you ready for the challenges and big prizes?
How to Play
1. MATLAB Mini Hack 2022 contest:
Use up to 280 characters of MATLAB code to generate an interesting image. New in 2022 contest: You'll be allowed to use functions from File Exchange entries and/or certain MathWorks toolboxes in different weeks.
2. Cody 10th Anniversary contest:
Solve at least 1 Cody problem per day during the 4-week contest period. We will reward participants with the longest streak of days of problem-solving!
Tips to Win
1. MATLAB Mini Hack 2022: Spend time creating your best work (either a new or remixed entry).
2. Cody 10th Anniversary: Make sure you start on the 1st day (Oct 3rd). This is the key if you want to win one of the grand prizes (worth marking your calendar?)
3. Act now: No matter if you want to join either the Mini Hack, Cody, or both. Start planning your strategy today.
Good luck! We hope you are the winner.
I wanted to ask that can we send bulk data through ThingSpeak ESP32 library using:
POST /channels/266256/bulk_update.csv HTTP/1.1
Host: api.thingspeak.com
Content-Type: application/x-www-form-urlencoded
time_format: relative
I saw it on mathswork "Bulk-Write CSV Data" (link: https://www.mathworks.com/help/thingspeak/bulkwritecsvdata.html)
Does ThingSpeak library supports the capability to send bulk csv data, any guidance?
Thanks and looking forward for your positive reply
Maybe %lld instead of %d?
I would like to know the maximum amount of storage space in the Data Logger.
We are thrilled to share that more than 400,000 people have subscribed to MATLAB YouTube channel to watch MATLAB and Simulink videos!🎉🙌🥳🎉🙌🥳🎉🙌🥳
The channel started way back in 2006, only one year after YouTube launched. Since then, people have spent more than 2.3 million hours watching our videos. It took us 12 years to reach 100k subscribers, two more years to get to 200k subs, and only 2 years to double that and grow to 400,000!
Did you know that in 2021, there were almost 10 million views to our videos on YouTube?
Thank you again for supporting our community inside and outside MATLAB Central!
You are invited to enter 2 fun community contests: MATLAB Mini Hack 2022 and Cody 10th Anniversary. The contests are designed for you to have fun, win prizes, and sharpen MATLAB skills. Participants across all skill levels are welcome to join!
How to Play
1. MATLAB Mini Hack 2022 contest:
Use up to 280 characters of MATLAB code to generate an interesting image. Sounds challenging? You can still participate by simply voting for the images you love.
2. Cody 10th Anniversary contest:
Solve at least 1 Cody problem per day during the 4-week contest period. We will reward participants with the longest streak of days of problem-solving!
Prizes
You will have opportunities to win compelling prizes, including Amazon gift cards, MathWorks T-shirts, and virtual badges. We will give out both weekly prizes and grand prizes. Check out the rules & prize section on each contest page for details.
Interested in joining? Follow the contests!
Click the ‘Follow the contests’ button to follow/register for the contest. You will get notified when the contests start. After contests start, you will also receive important announcements and prize information.
I have a data.
And, I want to substract the data using for.
But, I want to ignore the nan values and substract others.
For example, [1, 2, 3, NaN, 6, 9, 12, 14] ---- substract---> [1, 1, 3, 3, 2]
How can I do this?
Grace Hopper Celebration is an event that celebrates the legacy of Grace Hopper who acted as the inspiration for generations of women in tech. My female coworkers in highly accomplished technical roles will be speaking at the event. Come meet, connect and network with them at GHC22.
Hi guys,
I'm very new to matlab, so this might a rookie mistake. However, it seems that I have messed up some important part with the plot function. The program does not give my any kind of error messages, but still does not plot anything. What can I have done wrong and how do I fix this?
Best regards
My code:
close all
for t = -2:0.1:3
if (t<0 || t>1)
xvalue = 0;
end
if (t<= 1 && t>= 0)
xvalue = exp(2*t+1);
end
yvalue = -1*(xvalue) + exp(1);
hold on
figure(1);
plot(t, yvalue);
hold off
end
grid on;
Help us please, we need to send email after measurement from sonde (GSM report) is under limit for three days.
"React" on the limit, is non for three days under limit., and time control is days or weeks runner.
I propose trigger on time control but what is the code?
????
% Read the recent data.
moistureData = thingSpeakRead(channelID,'NumDays',3,'Fields',1); {is that right, that I read last three days measurement (3000x)?}
% Check to make sure the data was read correctly from the channel.
if isempty(moistureData)
alertBody = ' No data read from plant. ';
else
%{need if
% moistureData is for three days under limit from sonde then send
% email}
span = max(moistureData) - min(moistureData);
dryValue = span;
% Get the most recent point in the array of moisture data.
lastValue = moistureData(end);
% Set the outgoing message
if (lastValue<=dryValue)
alertBody = ' I need water! ';
elseif (lastValue>dryValue)
alertBody = ' No water needed. ';
end
really thanks so much
Congratulations, Walter, for this amazing run!
You hit 100k points on 14th Aug, 2020. So, these 25k points took just over 2 years to earn.
Thank you for your contribution to the community!
MATLAB Central Team
is there any problem today? thanks
Hi
Sent data was 4.94
{"created_at":"2022-08-28T23:38:23-04:00","entry_id":1269,"field4":"4.94"}]}
Read data was 4.00
Code:
long PHTS = ThingSpeak.readLongField(counterChannelNumber, FieldNumber4, myCounterReadAPIKey);
int statusCode = ThingSpeak.getLastReadStatus();
if (statusCode == 200)
{
Serial.print("ThingSpeak pH: ");
Serial.println(PHTS);
}
How to display 4.94 (actual data) when reading the data.
Thanks
If you are interested in developing algorithms for robotics and autonomous systems using ROS, there is an upcoming livestream just for you.
In this livestream, Jose Avendano Arbelaez and Ronal George will show you how to build and deploy autonomous algorithms using ROS. Using examples, they will show how to interface with ROS networks using publishers and subscribers, build algorithms for mapping, planning and navigation and deploying algorithms as ROS nodes.
Sign up here to get notification when it start streaming at 11:00 am (EDT) on Sep 1 view in your timezone
I want to allow private channels to be viewed only by my organisation. How do I do that?
Hello Academia,
I've been trying to get information regarding these configuraitons in a 3 phase transformer. The first is a dual secondary consisting of a wye output and delta output. Both feed separate 3 phase bridges, which outputs are connected in parallel.
The second is a Wye output, which each leg feeds 3 more series windings, which are located on the adjacent core (phase shifted) on the same transformer, with only one 3 phase bridge for the output
I see there is a zigzag simulink but can't seem to get that loaded...
My question is, are these essentially identical in operation, or is the dual secondary what I should be using? (due to better harmonic rejection)
Thanks,
Bryan
Congratulations, @Karim for winning the 1st ever Editor's Pick badge awarded for MATLAB Answers, in recoginition of your awesome solution in How to find X and Y coordinates of maximum gap between curves?
This is a new badge we just introduced to recognize awesome answers people contribute and yours was picked for discovering a creative way to solve the problem, and made the solution clear, and reproducible. Thank you so much for setting a high standard for MATLAB Answers and for your ongoing contribution to the community.
MATLAB Central Team
You provided 9717 answers at the acceptance rate of 75.23% and received 3281 votes. Thank you for your contribution to the community!
MATLAB Central Team
Hi,
I am using some dragino sensors and for the testing period I have used TTN and Thingspeak. The TTN to thingspeak integration was straigthforward as there are plenty of guides out there. However, the sensor will be running in an environment where I can not install a gateway and I will have to rely on a private LoRaWAN network. I would still like to use thigspeak as my endpoint for the data, and the company has requested documentation to configure endpoint URL and authorization header. They have no other inputs they can configure.
I am a newbie in all of this and I was wondering if you can point me in rigth direction. Is there any documentation available on how to configure a lowrawan server to send the data to my thingspeak channels? For each of these channels I have a write channel feed link, which I am guessing would be the authorisation header? What should I use for the enpoint URL?
Many thanks.
