メインコンテンツ
結果:
Hello, Recently I have started working on a thermal management project at my Institute. I am taking some hints from en example of EV thermal management provided by MATLAB. I am having an issue in deciding how the battery current and powertrain heat load is calculated as a function of vehicle speed. It would be helpful if someone could provide some links or references regarding this. (Also, attaching a screenshot of the example for better understanding)
I am processing ocean and climate data (1982-2022). Here, I have table which having heatwaves events details. Now, I want to sort the data month wise and also seasonal wise (summer:October- February, and winter:March-September), and then i wanted to plot mean seasonal and trend.
Sample file is attached. length of original file may vary in size.
Thanks in addvance.
Hello,
can someone help me with HEV model? I have no experience with simulink modeling, maybe someone have any simple HEV models or any tutorials how to start everything? :)
Thank you.
I am using simulink to generate a simple ADC sampling code. I configured ADC module in software mode, which updates the sampled value according to the sample time configured in the module. I set the sample time to 1e-4, 1e-5, 1e-6 respectively. But it seems that the sampling speed did not reach the value I set. I suspect it has something to do with the read and write operations, but I am not sure if that's the reason.
I also tried to do it using PWM event to trigger the start of conversion of ADC. Same problem happened. Because I connect a potentiometer and turn its knob slowly, the Graph on CCS is correct while when I turn it very quickly, the graph is not able to keep up with my movements. So the sampling rate is surely not enough. I wonder what I should do to successfully configure this model, thanks in advance!
Hello,
I have an Open Loop Transfer Function:
Gc(s)Gp(s) = aKp(1+Tis) / Tis(s+1+p)
It was decided for this system a=5, Ti=0.1 and p=0.5
What would the poles and zeroes be for this?
Ive done the other examples but this one looks very different to the other questions and it has me stuck.
Any help is appreciated and sorry if this is the wrong place to post such questions.
"The model is configured to create a SIL block, which is not supported for the selected hardware board. To resolve this, search for 'Create block' in the Configuration Parameters dialog box and set it to 'None' or 'PIL'.
I am facing an issue in data store memory block using store memory Read and write Block in matlab simulink. I have attached the screen short in which the posed error has been depicted.
Hello,
i want to implement a Energy Storage System with a Battery and a Supercapacitor, where the Supercapacitor comes in when the Battery has a short circuit for an emergency system. How can i implement something like this ? I think the right way is to implement a function where a switch is controlled by the SOC of the two storage systems or ?
Hi, I am currently studying the effects of varying switching frequency towards the inverter and motor system efficiency. I am using the three-phase converter which the gate signal is sent by a PWM generator. Inside the PWM generator block, there is switching frequency parameter. Therefore, is it possible if I can tune the value of switching frequency by making it as input and receving the signal in Matlab Simulink similar with Vabc and Vdc instead of tuning from Matlab code?
Hope to receive any comment or suggestion. Thank you.
Need some guidance on how to model the mutual inductance model from Simscape. The secondary side does not receive the voltage.
This is the 6th installment of the wish-list and bug report thread.
This topic is the follow on to the first Wish-list for MATLAB Answer sections and second MATLAB Answers Wish-list #2 (and bug reports). The third started out as New design of the forum - grey on white and the fourth and fifth also grew so large they are slow to load and navigate.
Same idea as the previous ones: one wish (or bug report) per answer, so that people can vote their wishes.
What should you post where?
Next Gen threads (#1): features that would break compatibility with previous versions, but would be nice to have
@anyone posting a new thread when the last one gets too large (about 50 answers seems a reasonable limit per thread), please update this list in all last threads. (if you don't have editing privileges, just post a comment asking someone to do the edit)
I want to understand this from the scratch, i will appreciate help and guidance very much.
When solving problems over on Cody, I can almost always view all solutions to a problem after submitting a correct solution of my own. Very rarely, however, this is not the case, and I instead get the following message:
This solution is locked. To view this solution, you need to provide a solution of the same size or smaller.
You may solve another problem from Community group to unlock all the solutions to this problem.
If this happens, then again, I can almost always rectify this by submitting a (correct) solution to a different problem (I take it that the Community group is the implicit group of all problems on Cody --- is it?). But sometimes that, too, fails.
So my question is, why? What are the criteria that determine when all solutions are, in fact, unlocked?
Simple question: I noticed there's a Modeling & Simulation Challenge Master badge over on Cody, but I can't find the corresponding group. So: where is it? Does it still exist at all?
Hi, having problems with this model. Tried changing all the capacitor values without any success. Any help/suggestions would be most welcome.
There are two kinds of text data type (=string data type) in MATLAB:
Text1='aText'; % first one
Text2="aText"; % first one
The second one did not exist in "old" MATLAB versions but the first one only.
My questions are: 1) What was motivation of MathWorks programmers to introduce the Text Data Type of the second format?
Yes, I know the difference: length(Text1)=5 whilst length(Text2)=1; Text1(2)='T' but Text2(2) does not exist. The array Text3=['one' ; 'fifth'] does not exist too.
2) However, any explanations and recommendations how to apply the second sort in contrast to the first one?
3) Is there any way how to convert one sort to another one?
Thanks for explanation in advance!
Error: The server timed out while running and assessing your solution in MATLAB CODY. How do I resolve this? My code is correct. I have run it on PC. But, when i submit in CODY the server throws an error.
I've now seen linear programming questions pop up on Answers recently, with some common failure modes for linprog that people seem not to understand.
One basic failure mode is an infeasible problem. What does this mean, and can it be resolved?
The most common failure mode seems to be a unbounded problem. What does this mean? How can it be avoided/solved/fixed? Is there some direction I can move where the objective obviously grows without bounds towards +/- inf?
Finally, I also see questions where someone wants the tool to produce all possible solutions.
A truly good exposition about linear programming would probably result in a complete course on the subject, and Aswers is limited in how much I can write (plus I'll only have a finite amount of energy to keep writing.) I'll try to answer each sub-question as separate answers, but if someone else would like to offer their own take, feel free to do so as an answer, since it has been many years for me since I learned linear programming.
Hello,
I am trying to do image to image regression neural network training. In place of digitTrain4DArrayData, I have used my own dataset of 500 input and 500 output grayscale images of size 100*100 pixels for training.
The code is as follows:
imds1 = datastore(fullfile(matlabdrive,"T10itTI"),"IncludeSubFolders",true,...
"FileExtensions",".png","type","image");
imds2 = datastore(fullfile(matlabdrive,"TFiSTI"),"IncludeSubFolders",true,...
"FileExtensions",".png","type","image");
dsnew = combine(imds1,imds2);
layers = [
imageInputLayer([100 100 1])
batchNormalizationLayer
reluLayer('Name','relu_1')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_2')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_3')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_4')
convolution2dLayer(1,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_5')
convolution2dLayer(3,1,'Stride',2)
batchNormalizationLayer
reluLayer('Name','relu_6')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_7')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_8')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_9')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_10')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_11')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_12')
convolution2dLayer(1,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_13')
transposedConv2dLayer(1,1,'Stride',2)
batchNormalizationLayer
reluLayer('Name','relu_14')
convolution2dLayer(1,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_15')
convolution2dLayer(1,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_16')
convolution2dLayer(3,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_17')
convolution2dLayer(1,1,'Stride',1)
batchNormalizationLayer
reluLayer('Name','relu_18')
transposedConv2dLayer(3,1,'Stride',2)
fullyConnectedLayer(1)
regressionLayer
]
lgraph = layerGraph(layers);
options = trainingOptions("adam", ...
InitialLearnRate=8e-3, ...
SquaredGradientDecayFactor=0.99, ...
MaxEpochs=20, ...
MiniBatchSize=64, ...
Plots="training-progress")
net=trainNetwork(dsnew, lgraph, options);
On running the code, I get following error:
Error using trainNetwork Invalid training data. The output size ([1 1 1]) of the last layer does not match the response size ([1 1 1972224]).
When I use fullyConnectedLayer(1972224) in place of fullyConnectedLayer(1), I get following error:
Error using trainNetwork Layer 'fc': Invalid initializer. Requested 1972224x17161 (252.2GB) array exceeds maximum array size preference (5.0GB). This might cause MATLAB to become unresponsive.
Error in mt1tt1 (line 95) net=trainNetwork(dsnew, lgraph, options);
Caused by: Error using nnet.internal.cnn.assembler.InitializeMixin/initializeLearnableParameters Layer 'fc': Invalid initializer. Requested 1972224x17161 (252.2GB) array exceeds maximum array size preference (5.0GB). This might cause MATLAB to become unresponsive.
Can you suggest correction in code?
Thankyou
Hi Fellow Users,
I am Muthuserpi From A begginer of Optics studio Please anyone help me how to add two diffeaction reflective grating and How to tilt and decenter in matlab simulation
Thanks And Regards
S.Muthuserpi
また、以下のリストから Web サイトを選択することもできます。
南北アメリカ
- América Latina (Español)
- Canada (English)
- United States (English)
ヨーロッパ
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom(English)
アジア太平洋地域
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)