how to make flux based model + inverter

I made a flux model based on dakai hu's 'High Fidelity Nonlinear IPM Modeling Based on Measured Stator Winding Flux Linkage' paper.

In this model, I control the speed and apply the load torque.

I need an inverter model because I want to model the inverter nonlinearity.

By incorporating inverter here, I want to make a model that controls torque/current and controls speed at the load.

how can i make it?

Answer 1

[Sabin]

This system can be modeled in Simscape Electrical with existing blocks (PMSM or FEM-Parameterized PMSM and Converter (Three-Phase or custom converter based on high fidelity semiconductor devices).

If you prefer to use Simulink based simulation you can check the Three-Phase Voltage Source Inverter in Powertrain Blockset:

https://www.mathworks.com/help/autoblks/ref/threephasevoltagesourceinverter.html

If you preffer an average inverter, check the Average-Value Inverter in Motor Control Blockset:

https://www.mathworks.com/help/mcb/ref/averagevalueinverter.html