Step response with initial condition

71 ビュー (過去 30 日間)
Drishya Dinesh
Drishya Dinesh 2021 年 4 月 19 日
コメント済み: Paul 2021 年 4 月 20 日
How to obtain a step response starting from 10?
ie; the initial value of u_del is 10. Hence the response should start from 10.
k=0.2;
t2=400;
u_del=(0.0022*k*(s+0.06931)*(s^2+0.4852*s+0.1492))/((s+0.04833)*(s+0.004352)*(s^2+0.06012*s+0.01331));
figure
step(u_del,t2);
ylabel('Velocity,u (m/s)','fontsize',10);
title('Time Response');
grid
  2 件のコメント
Paul
Paul 2021 年 4 月 19 日
編集済み: Paul 2021 年 4 月 20 日
Do you mean the step response output starts at 10, i.e., y(t=0) = 10?
Or do you mean the step is applied at t = 0, but the output is delayed and doesn't start to respond until t = 10?
It sounds like you mean the former, but it's not really clear.
Drishya Dinesh
Drishya Dinesh 2021 年 4 月 20 日
The step response output should start at 10, i.e., y(t=0) = 10

サインインしてコメントする。

回答 (2 件)

Star Strider
Star Strider 2021 年 4 月 19 日
To set the step amplitude to 10, try this:
k=0.2;
t2=400;
s = tf('s');
u_del=(0.0022*k*(s+0.06931)*(s^2+0.4852*s+0.1492))/((s+0.04833)*(s+0.004352)*(s^2+0.06012*s+0.01331));
opts = stepDataOptions('StepAmplitude',10); % Set Amplitude
figure
step(u_del,t2,opts); % Add ‘opts’ Argument
ylabel('Velocity,u (m/s)','fontsize',10);
title('Time Response');
grid
.
  4 件のコメント
Drishya Dinesh
Drishya Dinesh 2021 年 4 月 19 日
Sir I'm getting an error
Index exceeds the number of array elements (20).
Error in Untitled18 (line 3)
s = tf('s');
Star Strider
Star Strider 2021 年 4 月 19 日
When I first tried to run your code, it threw:
Unrecognized function or variable 's'.
so I added the tf call, since that makes sense in the context of the Control System Toolbox, and the posted code.
I cannot guess as to what the exact problem is, only that ‘tf’ appears to have been assigned as a vector or other variable in code you did not post, and MATLAB is interpreting the 's' as the ASCII numeric equivalent, and throwing that error. The unposted code therefore overshadowed the very useful tf function with something else.
Ignore whatever exists before my posted code and run only my code as I posted it to get the desired result.
My posted code runs without error.

サインインしてコメントする。


Paul
Paul 2021 年 4 月 20 日
According to the question, the output should satisfy y(t=0) = 10. But the system, u_del, as specified will yield a step response that starts at y(t=0) = 0, in the absence of any initial conditions on the states of the system. So the next question is: what causes the step response to start at y(t=0) = 10? If it is initial conditions on the states of the system, then we have to use a state space representation for u_del, and even then there will be different initial conditions on states that will result in an initial output y(t=0) = 10 but different dynamics for y(t).
  2 件のコメント
Drishya Dinesh
Drishya Dinesh 2021 年 4 月 20 日
How to give initial conditions if the system u_del is represented in state space to obtain output with y(0)=10
Paul
Paul 2021 年 4 月 20 日
One of many, many possibilities would be:
>> u_delss=ss(u_del);
>> x0=[10/u_delss.c(1) 0 0 0];
>> t = 0:1:t2;
>> y = step(u_delss,t) + lsim(u_delss,0*t,t,x0);
>> plot(t,y,t(1:10:end),y(1:10:end),'o'),grid
Probably doesn't give the response you're looking for, but it is the response of the system u_delss to a unit step input with initial conditions x0 that result in y(t=0) = 10.
Did you just want something simple like:
[y,t] = step(u_del);
plot(t,y+10),grid
Note that this isn't the step response of u_del.

サインインしてコメントする。

カテゴリ

Help Center および File ExchangePlot Customization についてさらに検索

タグ

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by