My table does not appear properly in my code

% Problem 1



% part (a)



Re = 6356.766;   % km         earth radius
Rs = 0.287053;   % kJ/K/kg    287.053 J/K/kg
B  = 34.1632;    % K/km       exponent constant
                 % ai = [diff(Ti)./diff(hi),0]

% heights (km)       (K)         slopes (K/km)
% --------------------------------------------------------------------------------
  h1 = 0;         T1 = 288.15;    a1 = -6.5;    % troposphere
  h2 = 11;        T2 = 216.65;    a2 = 0;       % tropopause                             
  h3 = 20;        T3 = 216.65;    a3 = 1;       % stratosphere 
  h4 = 32;        T4 = 228.65;    a4 = 2.8;     % stratosphere
  h5 = 47;        T5 = 270.65;    a5 = 0;       % stratopause
  h6 = 51;        T6 = 270.65;    a6 = -2.8;    % mesosphere
  h7 = 71;        T7 = 214.65;    a7 = -2;      % mesosphere
  h8 = 84.852;    T8 = 186.946;   a8 = 0;       % mesopause
  h9 = 90;        T9 = 186.946;                 % mesopause

hi = [h1, h2, h3, h4, h5, h6, h7, h8, h9]; 
zi = Re*hi./(Re-hi);
ai = [a1, a2, a3, a4, a5, a6, a7, a8];  
Ti = [T1, T2, T3, T4, T5, T6, T7, T8, T9];

f = @(h,Ti,hi,ai)  (ai~=0) * (1 + ai/Ti*(h-hi)).^(-B*pinv(ai)) + (ai==0) * exp(-B/Ti*(h-hi));

P1 = 101325;                      % P = Pressure, SI unit = N/m^2
P2 = f(h2, T1, h1, a1) * P1;      
P3 = f(h3, T2, h2, a2) * P2;
P4 = f(h4, T3, h3, a3) * P3;
P5 = f(h5, T4, h4, a4) * P4;
P6 = f(h6, T5, h5, a5) * P5;
P7 = f(h7, T6, h6, a6) * P6;
P8 = f(h8, T7, h7, a7) * P7;
P9 = f(h9, T8, h8, a8) * P8;

Pi = [P1, P2, P3, P4, P5, P6, P7, P8, P9];

rhoi = Pi./Ti/Rs/1000;     % this is divided by 1000 because Rs is in kJ/K/kg

L = {'troposphere', 'tropopause', 'stratosphere', 'stratosphere', 'stratopause', ...,
        'mesosphere', 'mesosphere', 'mesopause', 'mesopause'};

C = [L, num2cell([hi,zi,Ti,ai,Pi,rhoi])]';

disp(' ');
fprintf(' Atmospheric     hi       zi        Ti       ai        Pi         rhoi\n');  
fprintf('   Layer        (km)     (km)      (K)     (K/km)     (Pa)      (kg/m^3)\n');
fprintf('---------------------------------------------------------------------------\n');
fprintf('%12s   %6.3f   %6.3f   %7.3f   %4.1f   %11.4f   %5.5g\n', C{:});


% part (b)

T = @(h) (T1 + a1*(h-h1)) .* (h>=h1  & h<h2) + ...        % troposphere    
         (T2 + a2*(h-h2)) .* (h>=h2  & h<h3) + ...        % tropopause
         (T3 + a3*(h-h3)) .* (h>=h3  & h<h4) + ...        % stratosphere
         (T4 + a4*(h-h4)) .* (h>=h4  & h<h5) + ...        % stratosphere
         (T5 + a5*(h-h5)) .* (h>=h5  & h<h6) + ...        % stratopause
         (T6 + a6*(h-h6)) .* (h>=h6  & h<h7) + ...        % mesosphere
         (T7 + a7*(h-h7)) .* (h>=h7  & h<h8) + ...        % mesosphere
         (T8 + a8*(h-h8)) .* (h>=h8);                     % mesopause, valid till h = 90 km

P = @(h) P1 * f(h, T1, h1, a1) .* (h>=h1  & h<h2) + ...
         P2 * f(h, T2, h2, a2) .* (h>=h2  & h<h3) + ...
         P3 * f(h, T3, h3, a3) .* (h>=h3  & h<h4) + ...
         P4 * f(h, T4, h4, a4) .* (h>=h4  & h<h5) + ...
         P5 * f(h, T5, h5, a5) .* (h>=h5  & h<h6) + ...
         P6 * f(h, T6, h6, a6) .* (h>=h6  & h<h7) + ...
         P7 * f(h, T7, h7, a7) .* (h>=h7  & h<h8) + ...
         P8 * f(h, T8, h8, a8) .* (h>=h8);

rho = @(h) P(h)./T(h)/Rs/1000;

% part (c)

h = 0:0.1:90;

figure; 
plot(h,T(h),'b-',hi,Ti,'r.','markersize',20)


xlabel('{\ith}  (km)'); ylabel('{\itT}  (K)');
title('Standard Temperature Layers');

 

figure; semilogy(h,P(h),'b-', hi,Pi,'r.','markersize',20);


xlabel ('{\ith}  (km)'); ylabel('{\itP}  (Pa)');
title ('Pressure vs Height');
legend ('pressure', 'thresholds', 'location', 'ne');



figure; semilogy(h,rho(h),'b-', hi,rhoi,'r.','markersize',20);


xlabel('{\ith}  (km)'); ylabel('{\it\rho}  (kg/m^3)');
title('Air Density vs Height');
legend('density', 'thresholds', 'location','ne');

I have tried a few different things to try and fix the table, but nothing is working