How to create a custom damper component on Simscape

I am trying to create a custom damper for a Quarter of Vehicle Simscape model on Simulink. I am currently using a Force Source and connecting my force signal by means of a Simulink to PS converter. The problem is that I need the deflection velocity calculated by the same model in order to produce a certain damping force. Hence, I run into a Algebraic Loop issue, which I have not been able to resolve.

I would like to create a custom damper if possible, which I could just connect in place of a regular damper on Simscape.

Thank you for the help!!

Answer 1

[Arnaud Miege]

I assume you have something like this:

https://picasaweb.google.com/lh/photo/-wyO717K8a1EwQIJJ8Khaw?feat=directlink

Going in and out of Simulink causes the algebraic loop. Instead try using the PS Look-up Table (1D) as in:

https://picasaweb.google.com/lh/photo/teP1V1uUT2UhoPbKMRB5Tw?feat=directlink

Using physical signals and staying within the Simscape network will avoid algebraic loop and should get rid of your problem. Make sure to use data in m/s and N for the PS Look-up table.

HTH,

Arnaud

[Javier Ruiz]

Thank you Arnaud. I am in fact going out to Simulink. The issue is that my custom damper function is very complex and depends on more than one input. I currently have it on an Embedded MATLAB Function. Do I have other choices besides using the 1D or 2D Look-up Table in Simscape?

Thanks again!!

[Arnaud Miege]

Not really. You can use the Simscape language to create a custom component, but you'll still be relying on physical look-up tables. If you can upload a copy of your model on a filesharing site, I can maybe be more specific.