plotting a graph of multivariable function
3 ビュー (過去 30 日間)
古いコメントを表示
I formulated a matlab code for obtaining a curve and it is giving results but inside a loop for y1 and y2. The code is taking only last values, i.e., y1 and y2=1. however, I want to include the values of y1 and y2 from 0 to 1. How can I include it.
The code is written as:
clear all
clc
format longEng
syms z y1 y2
phi=(pi/180)*39;
delta=(pi/180)*26;
gma=18.4;
h=4;
q=20;
a=0.1;
b=0.4;
h1=1.021121318;
h2=0.744439152;
L=h+h1+h2;
beta=5;
alfa=1;
% z1=z-h;
% z2=z-h-h1;
R1=-1;
R3=-1,%-(alfa*((z-h-h1)/h2))^0.5;
% R2=3*(beta*(1-((z-h)/(h1))))^0.5;
% R4=3*(alfa*((z-h-h1)/h2))^0.5;
kh=0.0;
kv=0;
psi=atan(kh/(1-kv));
da1=delta; pha1=phi;
l=pha1+da1;
m=pha1-psi;
n=psi+da1;
B=(2*q*b*(b/(2*a+b)))/(gma*(h+h1)*(h+h1));
alphacm=atan((sin(l)*sin(m)+(((sin(l)^2)*(sin(m)^2))-B*cos(n)*sin(m)*cos(l)+cos(m)*sin(l)*sin(m)*cos(l))^0.5)/((cos(m)*sin(l))-B*cos(n)))
kg1=((tan(alphacm-phi)+tan(psi))*cos(alphacm-phi))/(tan(alphacm)*(cos(alphacm-phi-delta)))
r1=(b/(h+h1))*(b/(2*a+b))*(tan(alphacm))
kq1=r1*kg1
% pgx=gma*(1-kv)*kg1*x
pqx=(1-kv)*q*kq1
%
k4R0=(2*cos(phi-psi)^2)/(cos(phi-psi)^2+cos(psi)*cos((delta/2)+psi)...
*(1+sqrt((sin(phi+(delta))*sin(phi-psi))/cos((delta/2)+psi)))^2)
%
delm3=-0.5*(1-R3)*delta;
k3=(2*cos(phi-psi)^2)/(cos(phi-psi)^2*(1+R3)+cos(psi)*cos(delm3+psi)*(1-R3)*(1+sqrt((sin(phi+delm3)*sin(phi-psi))/cos(delm3+psi)))^2)
%
delm23=0.5*(3-1)*delta;
k23=1+0.5*(3-1)*((cos(phi-psi)^2/(cos(psi)*(cos(delm23+psi)*...
(-sqrt((sin(phi+delm23)*sin(phi-psi))/(cos(delm23+psi)))+1)^2)))-1)
R2=3*(beta*(1-y1))^0.5;
delm213=0.5*(R2-1)*delta;
k213=1+0.5*(R2-1)*((cos(phi-psi)^2/(cos(psi)*(cos(delm213+psi)*...
(-sqrt((sin(phi+delm213)*sin(phi-psi))/(cos(delm213+psi)))+1)^2)))-1)
delm201=0.5*(1-R2)*delta;
k201=(2*cos(phi-psi)^2)/(cos(phi-psi)^2*(1+R2)+cos(psi)*cos(delm201+psi)...
*(1-R2)*(1+sqrt((sin(phi+delm201)*sin(phi-psi))/cos(delm201+psi)))^2)
delm43=0.5*(3-1)*delta;
k43=1+0.5*(3-1)*((cos(phi-psi)^2/(cos(psi)*(cos(delm43+psi)*(-sqrt((sin(phi+delm43)...
*sin(phi-psi))/(cos(delm43+psi)))+1)^2)))-1)
R4=3*(alfa*y2)^0.5;
delm413=0.5*(R4-1)*delta;
k413=1+0.5*(R4-1)*((cos(phi-psi)^2/(cos(psi)*(cos(delm413+psi)*(-sqrt((sin(phi+delm413)...
*sin(phi-psi))/(cos(delm413+psi)))+1)^2)))-1)
delm401=0.5*(1-R4).*delta;
k401=(2*cos(phi-psi)^2)/(cos(phi-psi)^2*(1+R4)+cos(psi)*cos(delm401+psi)...
*(1-R4)*(1+sqrt((sin(phi+delm401)*sin(phi-psi))/cos(delm401+psi)))^2);
i=0;
for z=0:0.1:L
i=i+1;
if(z<=h)
p1(i)=kg1*gma*z*cos(delta)+kq1*q;
p2(i)=0;
elseif z<=(h+h1)
p1(i)=kg1*gma*z*cos(delta)+kq1*q;
for y1=0:0.01:1
if (y1>=0 && y1<=(1-(1/beta)))
p2(i)=-gma*(z-h)*k23*cos(delm23);
elseif (y1>=(1-(1/beta)) && y1<=(1-(1/(9*beta))))
p2(i)=-gma*(z-h)*eval(subs(k213*cos(delm213)));
else (y1>=(1-(1/(9*beta))) && y1<=1)
p2(i)=-gma*(z-h)*eval(subs(k201*cos(delm201)));
end
end
else
p2(i)=-k3*cos(delm3)*gma*(z-h-h1)-gma*k3*h1*cos(delta);
for y2=0:0.01:1
if(y2>=0 && y2<=(1/(9*alfa)))
p1(i)=gma*(z-h-h1)*eval(subs(k401*cos(delm401)))+(gma*(h1+h)+q)*k4R0*cos(delta/2);
elseif(y2>=(1/(9*alfa)) && y2<=(1/alfa))
p1(i)=gma*(z-h-h1)*eval(subs(k413*cos(delm413)))+(gma*(h1+h)+q)*k4R0*cos(delta/2);
else(y2>=(1/alfa) && y2<=1)
p1(i)=gma*(z-h-h1)*k43*cos(delm43)+(gma*(h1+h)+q)*k4R0*cos(delta/2);
end
end
end
end
z=0:0.1:L;
% subplot(2,1,1);
plot(p1,z,p2,z)
grid on
set(gca, 'YDir','reverse')
0 件のコメント
回答 (1 件)
Raj
2019 年 12 月 4 日
"The code is taking only last values, i.e., y1 and y2=1" - No it is not taking only the last values. The for loop for both y1 and y2 runs for all values from 0 to 1 with increment of 0.1
Lets see one loop:
for y1=0:0.01:1
if (y1>=0 && y1<=(1-(1/beta)))
p2(i)=-gma*(z-h)*k23*cos(delm23);
elseif (y1>=(1-(1/beta)) && y1<=(1-(1/(9*beta))))
p2(i)=-gma*(z-h)*eval(subs(k213*cos(delm213)));
else (y1>=(1-(1/(9*beta))) && y1<=1)
p2(i)=-gma*(z-h)*eval(subs(k201*cos(delm201)));
end
end
The problem here is that you are overwriting the P2 (i) value for each value of y1 and what gets finally saved is the last computed value with y1=1. If you want to save all the P2 values for every value of y1 you will have to index it properly by using a 2D matrix.
6 件のコメント
Raj
2019 年 12 月 5 日
Depends on which value of y1/y2 you want to plot p2/p1 versus z. Its quite straight forward actually. p1/p2 are 2D matrices where rows are values with varying 'z' and columns are values with varying y2/y1 respectively. Just extract the relevant data and plot against 'z'.
参考
カテゴリ
Help Center および File Exchange で Surface and Mesh Plots についてさらに検索
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!