フィルターのクリア

2D beamforming simulation

19 ビュー (過去 30 日間)
Anandu S
Anandu S 2019 年 9 月 21 日
コメント済み: Anandu S 2019 年 9 月 24 日
How to design an antenna with the below mentioned specifications
query.JPG
  2 件のコメント
darova
darova 2019 年 9 月 21 日
What have you tried already? DO you have any attempts?
Anandu S
Anandu S 2019 年 9 月 21 日
編集済み: Anandu S 2019 年 9 月 21 日
yah I did.
f=4e9;
theta1=-180:180;
phi1=-90:90;
[theta phi]=meshgrid(theta1,phi1);
theta3dB=30;
Am=21;
AdB=-min(12.*(theta./theta3dB).^2,Am);
phasepattern = zeros(size(AdB));
antennaElement = phased.CustomAntennaElement(...
'AzimuthAngles',theta1, ...
'ElevationAngles',phi1, ...
'MagnitudePattern',AdB, ...
'PhasePattern',phasepattern);
fe = figure;
pattern(antennaElement,f);
and I got a pattern and I'm not sure whether this is correct or not!.The pattern shouldn't be a function of the elevation angle but does act in that way.

サインインしてコメントする。

回答 (1 件)

Honglei Chen
Honglei Chen 2019 年 9 月 23 日
First of all, I don't think elevation is changing. This plot is in spherical coordinates, so the surface is curved, but the colormap shows that the value is constant along elevation dimension.
I see you are modeling the 5G antenna, I beleive there is an equation for azimuth direction too. Once you get this two, you can combine the two to form the 3D pattern of the antenna and set it in CustomAntennaElement.
HTH
  1 件のコメント
Anandu S
Anandu S 2019 年 9 月 24 日
I've already done the 3D pattern. I'am trying to compare the cdf of sinrs of 2D and 3D beamforming. The sinr map for 2D beamforming that I got is not the expected one. https://ieeexplore.ieee.org/document/7492925/authors#authors I'm actullay following this paper
clc;
clear all;
close all;
%centre cell
centreCell=txsite('Name','MathWorks Glasgow', ...
'Latitude',55.862787,...
'Longitude',-4.258523);
cellNumber=19;
cellDistances=zeros(1,cellNumber);
cellAngles = zeros(1,cellNumber);
isd=750;
%distances and angles for first ring of cells
cellDistances(2:7) = isd;
cellAngles(2:7) = 30:60:360;
%distances and angles for second ring of cells
cellDistances(8:13) = 2*isd*cosd(30);
cellAngles(8:13) = 0:60:300;
%distances and angles for second ring of cells
cellDistances(14:19) = 2*isd;
cellAngles(14:19) = 30:60:360;
%%
cellAngles= cellAngles.*(pi./180);
[x,y]=pol2cart(cellAngles,cellDistances);
scatter(x,y);
%%
numSectors = cellNumber*3;
sectLats = zeros(1,numSectors);
sectLons = zeros(1,numSectors);
sectNames = strings(1,numSectors);
sectAngles = zeros(1,numSectors);
SectorAngles = [30 150 270];
sectIn=1;
for cellIn = 1:cellNumber
% Compute site location using distance and angle from center site
[cellLat,cellLon] = location(centreCell, cellDistances(cellIn), cellAngles(cellIn));
% Assign values for each cell
for SectorAngle = SectorAngles
sectNames(sectIn) = "sect " + sectIn;
sectLats(sectIn) = cellLat;
sectLons(sectIn) = cellLon;
sectAngles(sectIn) = SectorAngle;
sectIn = sectIn + 1;
end
end
f=6e9;
%f=850e6;
antHeight=50;
txPowerdB=44;
txPower=10.^((txPowerdB-30)./10);
txs=txsite('Name',sectNames, ...
'Latitude',sectLats, ...
'Longitude',sectLons, ...
'AntennaAngle',sectAngles, ...
'AntennaHeight',antHeight, ...
'TransmitterFrequency',f, ...
'TransmitterPower',txPower);
%viewer=siteviewer;
show(txs);
%viewer.Basemap='openstreetmap';
theta1=-180:180;
phi1=-90:90;
[theta phi]=meshgrid(theta1,phi1);
phi3dB=10;
theta3dB=70;
phi_tilt=-20;
Am=30;
AdB=-min(12.*(theta./theta3dB).^2,Am);
%AvdB=-min(12.*((phi-phi_tilt)./phi3dB).^2,Am);
%AdB=-min(-(AhdB+AvdB),Am);
phasepattern = zeros(size(AdB));
antennaElement = phased.CustomAntennaElement(...
'AzimuthAngles',theta1, ...
'ElevationAngles',phi1, ...
'MagnitudePattern',AdB, ...
'PhasePattern',phasepattern);
fe = figure;
pattern(antennaElement,f);
for tx=txs
tx.Antenna=antennaElement;
end
bw = 20e6; % 20 MHz bandwidth
rxNoiseFigure = 7; % dB
rxNoisePower = -174 + 10*log10(bw) + rxNoiseFigure;
rxGain = 0; % dBi
rxAntennaHeight = 1.5; % m
% Display SINR map
if isvalid(fe)
close(fe)
end
sinr(txs,'freespace', ...
'ReceiverGain',rxGain, ...
'ReceiverAntennaHeight',rxAntennaHeight, ...
'ReceiverNoisePower',rxNoisePower, ...
'MaxRange',isd, ...
'Resolution',isd/20)
query2.JPG
I should get a sinr map like this

サインインしてコメントする。

カテゴリ

Help Center および File ExchangeBeamforming and Direction of Arrival Estimation についてさらに検索

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by