"measure temperature from i2c device using arduino hardware".

6 ビュー (過去 30 日間)
TAMALAMPUDI VENKATA SAI SAKETH REDDY
TAMALAMPUDI VENKATA SAI SAKETH REDDY 2019 年 3 月 20 日
コメント済み: Madhu Govindarajan 2019 年 3 月 27 日
HI, I am trying to read a data from tmp102 sensor with MATLAB by using arduino board. Here I am using I2C communication Before this I was able to read many sensor data with MATLAB by using arduino board with I2C communication. but for tmp102 sensor I am able to read the address and follow the data and write the required bytes, but when I read I am getting error "Failed to read 2 uint8 value(s) from the device." The code used is :
clear all clc a = arduino();
addrs = scanI2CBus(a)
tmp102 = i2cdev(a, '0x48')
write(tmp102, 0, 'uint8');
data = read(tmp102, 2, 'uint8');
temperature = (double(bitshift(int16(data(1)), 4)) + double(bitshift(int16(data(2)), -4))) * 0.0625
writeRegister(tmp102, 1, hex2dec('60B0'), 'uint16');
pause(0.25);
data = readRegister(tmp102, 0, 'int16');
temperature = double(bitshift(bitand(data, hex2dec('FFF8')), -3)) * 0.0625
writeRegister(tmp102, 1, hex2dec('60A0'), 'int16');
clear tmp102 a
Please help to resolve this issue. I am using MATLAB 2018b
Thanks saketh
  2 件のコメント
TAMALAMPUDI VENKATA SAI SAKETH REDDY
TAMALAMPUDI VENKATA SAI SAKETH REDDY 2019 年 3 月 26 日
Iam using the code and connections which was given in the link provided by the mathworks https://www.mathworks.com/help/supportpkg/arduinoio/examples/measure-temperature-from-i2c-device-on-arduino-hardware.html?prodcode=ML .But Iam getting an error"Failed to read 2 uint8 value(s) from the device" when i running the code in the matlab version 2018b with arduino uno board.And while running the code Iam getting 0x0 empty cell array in the address place.Can you resolve the code and give the correct code.
thank you

サインインしてコメントする。

回答 (3 件)

Madhu Govindarajan
Madhu Govindarajan 2019 年 3 月 20 日
What is the Arduino board using and does your hardware setup look similar to the one shown here - https://www.mathworks.com/help/supportpkg/arduinoio/examples/measure-temperature-from-i2c-device-on-arduino-hardware.html?prodcode=ML
  2 件のコメント
Madhu Govindarajan
Madhu Govindarajan 2019 年 3 月 21 日
What happens if you remove the following three lines of code and run the rest of the code? -
write(tmp102, 0, 'uint8');
data = read(tmp102, 2, 'uint8');
temperature = (double(bitshift(int16(data(1)), 4)) + double(bitshift(int16(data(2)), -4))) * 0.0625

サインインしてコメントする。


TAMALAMPUDI VENKATA SAI SAKETH REDDY
TAMALAMPUDI VENKATA SAI SAKETH REDDY 2019 年 3 月 22 日
it was giving an error "failed to read int16 values from register 0".sir our project final review date was ahead. Can u please give the correct code to get output. Thank you for the response

Madhu Govindarajan
Madhu Govindarajan 2019 年 3 月 22 日
Can you try with other arduino boards or other sensors? That code works for me on the Arduino and TMP102 sensor.
  4 件のコメント
Madhu Govindarajan
Madhu Govindarajan 2019 年 3 月 27 日
Try testing it from Arduino IDE itself and if that also does not work then you know the sensor is not working. If that works, reach out to MathWorks Technical Support.

サインインしてコメントする。

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by