Iteratively using 2 For Loops to create 4 data sets

3 ビュー (過去 30 日間)
Matthew Hole
Matthew Hole 2019 年 3 月 6 日
コメント済み: Matthew Hole 2019 年 3 月 6 日
Hi,
I am trying to use 2 for loops, one nested into the first one. I want to change a variable 4 times in the first for loop, so that i get 20 values for the output from the second for loop. I want to repeat this the 4 times in the first one. From this I want to save the data individually to then be plotted.
When it runs, it isnt executing properly so either has a size of 4 or 20.
load('Thermo CW.mat')
P1 = 24990;%alt 40000ft
V1 = 238.32; %Mach 0.9
T1 = 220.79;
%Changing Parameters
CompStage = 9;
CompOPR = linspace(15,30,4);
for n = 1:length(CompOPR)
CompSPR = CompOPR.^(1/CompStage);
%Parameters
CompEff = Values(5);
CPair = [1005 1005 1005 1005];
kAir = Values(28);
CombdP = 0.02;
TOPR = Values(24);
TStages = 3;
TSPR = TOPR^(1/TStages);
kGas = [1.369863013698630];
TEff = Values(9);
CPgas = [1100 1100 1100 1100];
T2s = T1 + ((V1^2)./(2.*CPair));
P2s = P1 * ((T2s/T1).^(kAir/(kAir-1)));
T2 = T2s;
P2 = P2s;
CompT1 = T2;
CompP1 = P2;
CompT1s = T2;
CompP2s = P2;
CompT2s = CompT1.*((CompSPR).^((kAir-1)/kAir));
CompT2 = (((CompT2s - CompT1)/CompEff)+CompT1);
ComP2s = CompP1 * ((CompT2s/CompT1).^(kAir/(kAir-1)));
CompP2 = CompP1 * ((CompT2/CompT1).^(kAir/(kAir-1)));
CompT3s = CompT2.*((CompSPR).^((kAir-1)/kAir));
CompT3 = (((CompT3s - CompT2)/CompEff)+CompT2);
ComP3s = CompP2 * ((CompT3s/CompT2).^(kAir/(kAir-1)));
CompP3 = CompP2 * ((CompT3/CompT2).^(kAir/(kAir-1)));
CompT4s = CompT3.*((CompSPR).^((kAir-1)/kAir));
CompT4 = (((CompT4s - CompT3)/CompEff)+CompT3);
CompP4s = CompP3 * ((CompT4s/CompT3).^(kAir/(kAir-1)));
CompP4 = CompP3 * ((CompT4/CompT3).^(kAir/(kAir-1)));
CompT5s = CompT4.*((CompSPR).^((kAir-1)/kAir));
CompT5 = (((CompT5s - CompT4)/CompEff)+CompT4);
CompP5s = CompP4 * ((CompT5s/CompT4).^(kAir/(kAir-1)));
CompP5 = CompP4 * ((CompT5/CompT4).^(kAir/(kAir-1)));
CompT6s = CompT5.*((CompSPR).^((kAir-1)/kAir));
CompT6= (((CompT6s - CompT5)/CompEff)+CompT5);
CompP6s = CompP5 * ((CompT6s/CompT5).^(kAir/(kAir-1)));
CompP6 = CompP5 * ((CompT6/CompT5).^(kAir/(kAir-1)));
CompT7s = CompT6.*((CompSPR).^((kAir-1)/kAir));
CompT7= (((CompT7s - CompT6)/CompEff)+CompT6);
CompP7s = CompP6 * ((CompT7s/CompT6).^(kAir/(kAir-1)));
CompP7 = CompP6 * ((CompT7/CompT6).^(kAir/(kAir-1)));
CompT8s = CompT7.*((CompSPR).^((kAir-1)/kAir));
CompT8= (((CompT8s - CompT7)/CompEff)+CompT7);
CompP8s = CompP7 * ((CompT8s/CompT7).^(kAir/(kAir-1)));
CompP8 = CompP7 * ((CompT8/CompT7).^(kAir/(kAir-1)));
CompT9s = CompT8.*((CompSPR).^((kAir-1)/kAir));
CompT9= (((CompT9s - CompT8)/CompEff)+CompT8);
CompP9s = CompP8 * ((CompT9s/CompT8).^(kAir/(kAir-1)));
CompP9 = CompP8 * ((CompT9/CompT8).^(kAir/(kAir-1)));
CompT10s = CompT9.*((CompSPR).^((kAir-1)/kAir));
CompT10= (((CompT10s - CompT9)/CompEff)+CompT9);
CompP10s = CompP9 * ((CompT10s/CompT9).^(kAir/(kAir-1)));
CompP10 = CompP9 * ((CompT10/CompT9).^(kAir/(kAir-1)));
T3s = T2s.*((CompOPR).^((kAir-1)/kAir))
T3 = CompT10;
P3s = CompP10s;
P3 = CompP10;
CompWorks = CPair .*(T3s-T2s);
CompWork = CPair .*(T3 - T2);
T4 = linspace(1500,1900,20);
for k = 1:length(T4)
T4s = T4;
P4s = P3;
P4 = P4s * (1-CombdP);
TT1 = T4;
TT1s = T4s;
TP1s = P4;
TP1 = P4;
TT2s = TT1 * ((TSPR^((kGas-1)/kGas)));
TT2 = (((TT2s - TT1)*TEff)+TT1);
TP2s = TP1 *((TT2s/TT1)^(kGas/(kGas-1)));
TP2 = TP1 * ((TT2/TT1)^(kGas/(kGas-1)));
TT3s = TT2 * ((TSPR^((kGas-1)/kGas)));
TT3 = (((TT3s - TT2)*TEff)+TT2);
TP3s = TP2 *((TT3s/TT2)^(kGas/(kGas-1)));
TP3 = TP2 * ((TT3/TT2)^(kGas/(kGas-1)));
TT4s = TT3 * ((TSPR^((kGas-1)/kGas)));
TT4 = (((TT4s - TT3)*TEff)+TT3);
TP4s = TP3 *((TT4s/TT3)^(kGas/(kGas-1)));
TP4 = TP3 * ((TT4/TT3)^(kGas/(kGas-1)));
AuxPwr = (0.08) * CompWork;
TrueTurbOutT = AuxPwr + CompWork;
TurbWorkMechLoss = TrueTurbOutT ./ (0.98);
T51 = reshape(T5,1,20)
T5s = (-(TurbWorkMechLoss / CPgas)) + T4;
P5 = P4 .* ((T51/T4).^(kGas./(kGas - 1)));
P5s = P5;
P6s = P1;
P6 = P1;
T6s1 = size(((P6s ./ P5s) .^((kGas - 1) ./ kGas)))
T5s1 = reshape(T5s,20,1)
T5 = T5s1
size(T5s1)
T6s = (T5s1 .* ((P6s ./ P5s) .^((kGas - 1) ./ kGas)));
T6 = T5 .* ((P6 ./ P5).^((kGas - 1)./ kGas));
V6 = (0.98.*(((T5-T6).*(2.*CPgas)).^(1/2)).^(2)).^(1/2);
mDotair = Values(31);
CPavg = (CPair + CPgas)/2;
T31 = reshape(T3,4,1)
Qin = mDotair * CPavg *(T4-T31);
LHV = Values(17)*(10^6);
mDotfuel = Qin/LHV;
mOut = (mDotair + mDotfuel)
size(mOut)
size(V6)
momOut = (mOut)*V6
momIn = (mDotair.*V1)
size(mDotair)
size(V1)
Thrust = momOut-momIn;
mDotexhaust = mDotair + mDotfuel;
SpecificThrust = Thrust/(mDotair);
end
end
Any Help would be brilliant, I have seen examples for similar questions but nothing that I can apply to this.
Thanks in advance

回答 (1 件)

Kevin Phung
Kevin Phung 2019 年 3 月 6 日
You dont seem to be doing any sort of indexing with CompOPR. so every loop iteration is the same.
for example, I think you meant to do this for this line:
CompSPR = CompOPR(n)^(1/CompStage);
  1 件のコメント
Matthew Hole
Matthew Hole 2019 年 3 月 6 日
Yes, thats what I indeeded to put. However, when I was writing the code I did the second For Loop first (shown below) and it works perfectly. So I then tried to do the next For Loop being the one you referenced above. So now I dont even get the result of below in the one above. Ie the 20 values I would get in the code below for Thrust, specific thrust etc, I now only get 4 values from the one above. Any ideas?
load('Thermo CW.mat')
P1 = 24990;%alt 40000ft
V1 = 238.32; %Mach 0.9
T1 = 220.79;
%Changing Parameters
CompStage = 9;
CompOPR = 15;
CompSPR = CompOPR^(1/CompStage);
%Parameters
CompEff = Values(5);
CPair = Values(4);
kAir = Values(28);
CombdP = 0.02;
TOPR = Values(24);
TStages = 3;
TSPR = TOPR^(1/TStages);
kGas = Values(30);
TEff = Values(9);
CPgas = Values(8);
T2s = T1 + ((V1^2)/(2*CPair));
P2s = P1 * ((T2s/T1)^(kAir/(kAir-1)));
T2 = T2s;
P2 = P2s;
CompT1 = T2;
CompP1 = P2;
CompT1s = T2;
CompP2s = P2;
CompT2s = CompT1*((CompSPR)^((kAir-1)/kAir));
CompT2 = (((CompT2s - CompT1)/CompEff)+CompT1);
ComP2s = CompP1 * ((CompT2s/CompT1)^(kAir/(kAir-1)));
CompP2 = CompP1 * ((CompT2/CompT1)^(kAir/(kAir-1)));
CompT3s = CompT2*((CompSPR)^((kAir-1)/kAir));
CompT3 = (((CompT3s - CompT2)/CompEff)+CompT2);
ComP3s = CompP2 * ((CompT3s/CompT2)^(kAir/(kAir-1)));
CompP3 = CompP2 * ((CompT3/CompT2)^(kAir/(kAir-1)));
CompT4s = CompT3*((CompSPR)^((kAir-1)/kAir));
CompT4 = (((CompT4s - CompT3)/CompEff)+CompT3);
CompP4s = CompP3 * ((CompT4s/CompT3)^(kAir/(kAir-1)));
CompP4 = CompP3 * ((CompT4/CompT3)^(kAir/(kAir-1)));
CompT5s = CompT4*((CompSPR)^((kAir-1)/kAir));
CompT5 = (((CompT5s - CompT4)/CompEff)+CompT4);
CompP5s = CompP4 * ((CompT5s/CompT4)^(kAir/(kAir-1)));
CompP5 = CompP4 * ((CompT5/CompT4)^(kAir/(kAir-1)));
CompT6s = CompT5*((CompSPR)^((kAir-1)/kAir));
CompT6= (((CompT6s - CompT5)/CompEff)+CompT5);
CompP6s = CompP5 * ((CompT6s/CompT5)^(kAir/(kAir-1)));
CompP6 = CompP5 * ((CompT6/CompT5)^(kAir/(kAir-1)));
CompT7s = CompT6*((CompSPR)^((kAir-1)/kAir));
CompT7= (((CompT7s - CompT6)/CompEff)+CompT6);
CompP7s = CompP6 * ((CompT7s/CompT6)^(kAir/(kAir-1)));
CompP7 = CompP6 * ((CompT7/CompT6)^(kAir/(kAir-1)));
CompT8s = CompT7*((CompSPR)^((kAir-1)/kAir));
CompT8= (((CompT8s - CompT7)/CompEff)+CompT7);
CompP8s = CompP7 * ((CompT8s/CompT7)^(kAir/(kAir-1)));
CompP8 = CompP7 * ((CompT8/CompT7)^(kAir/(kAir-1)));
CompT9s = CompT8*((CompSPR)^((kAir-1)/kAir));
CompT9= (((CompT9s - CompT8)/CompEff)+CompT8);
CompP9s = CompP8 * ((CompT9s/CompT8)^(kAir/(kAir-1)));
CompP9 = CompP8 * ((CompT9/CompT8)^(kAir/(kAir-1)));
CompT10s = CompT9*((CompSPR)^((kAir-1)/kAir));
CompT10= (((CompT10s - CompT9)/CompEff)+CompT9);
CompP10s = CompP9 * ((CompT10s/CompT9)^(kAir/(kAir-1)));
CompP10 = CompP9 * ((CompT10/CompT9)^(kAir/(kAir-1)));
T3s = T2s*((CompOPR)^((kAir-1)/kAir))
T3 = CompT10;
P3s = CompP10s;
P3 = CompP10;
CompWorks = CPair *(T3s-T2s);
CompWork = CPair *(T3 - T2);
T4 = linspace(1500,1900,20);
for k = 1:length(T4)
T4s = T4;
P4s = P3;
P4 = P4s * (1-CombdP);
TT1 = T4;
TT1s = T4s;
TP1s = P4;
TP1 = P4;
TT2s = TT1 * ((TSPR^((kGas-1)/kGas)));
TT2 = (((TT2s - TT1)*TEff)+TT1);
TP2s = TP1 *((TT2s/TT1)^(kGas/(kGas-1)));
TP2 = TP1 * ((TT2/TT1)^(kGas/(kGas-1)));
TT3s = TT2 * ((TSPR^((kGas-1)/kGas)));
TT3 = (((TT3s - TT2)*TEff)+TT2);
TP3s = TP2 *((TT3s/TT2)^(kGas/(kGas-1)));
TP3 = TP2 * ((TT3/TT2)^(kGas/(kGas-1)));
TT4s = TT3 * ((TSPR^((kGas-1)/kGas)));
TT4 = (((TT4s - TT3)*TEff)+TT3);
TP4s = TP3 *((TT4s/TT3)^(kGas/(kGas-1)));
TP4 = TP3 * ((TT4/TT3)^(kGas/(kGas-1)));
AuxPwr = (0.08) * CompWork;
TrueTurbOutT = AuxPwr + CompWork;
TurbWorkMechLoss = TrueTurbOutT/(0.98);
T5s = (-(TurbWorkMechLoss/CPgas)) + T4;
T5 = T5s;
P5 = P4 * ((T5/T4)^(kGas/(kGas - 1)));
P5s = P5;
P6s = P1;
P6 = P1;
T6s = T5s *((P6s/P5s)^((kGas-1)/kGas));
T6 = T5 * (((P6/P5)^((kGas-1)/kGas)));
V6 = (0.98*(((T5-T6)*(2*CPgas)).^(1/2)).^(2)).^(1/2);
mDotair = Values(31);
CPavg = (CPair + CPgas)/2;
Qin = mDotair * CPavg *(T4-T3);
LHV = Values(17)*(10^6);
mDotfuel = Qin/LHV;
Thrust = ((mDotair + mDotfuel).*V6)-(mDotair.*V1);
mDotexhaust = mDotair + mDotfuel;
SpecificThrust = Thrust/(mDotair);
end
plot(T4,SpecificThrust)
xlabel('Temperature, K')
ylabel('Specific Thrust, N s / kg')

サインインしてコメントする。

カテゴリ

Help Center および File ExchangeData Distribution Plots についてさらに検索

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by