This code is not generating values in the temperatureparallel.dat file. I believe it has to do with %10.6f. It is graphing properly. Any help is greatly appreciated.
clc
close all
fid=fopen('.\temperatureparallel.dat','w');
fprintf(fid,'variables = "t","tfire","ts1","ts2","ti","ta"\r\n');
fprintf(fid,'zone\r\n');
g=9.81;
h=1.0; % m height of wall
%set properties
%carbon steel 1
cps1=502.48;
ks1=16.27;
rhos1=8030.0;
As1=0.0025; %Area of steel exposed to tf
%carbon steel 2
cps2=502.48;
ks2=16.27;
rhos2=8030.0;
%insulation
cpi=711.756; %(J/kg-K)
ki=0.033;
rhoi=32.04;
Ai=0.9975; %Area of insulation exposed to tf
%cpi=473.0d0
%ki=43.0d0
%rhoi=7801.0d0
%air
cpa=1006.43;
ka=2.42E-2;
rhoa=1.2041;
rmua=1.7894E-5;
rnua=rmua/rhoa;
alpha=ka/(rhoa*cpa);
pra=rnua/alpha;
Va=1.0; %m^3
%set widths of each section
li=104.0/1000.0; %m
ls1=108.0/1000.0; %m
ls2=4.0/1000.0; %m
la=1.0; %m
%evaluate average of insulation and steel conductivity using harmonic average
kbar=ki*ks1/(ki+ks1);
%set initial conditions
t=0.0;
to=293.15;
tf=0.0;
ts1=to;
ts2=to;
ti=to;
ta=to;
%set time parameters and initial conditions
tfinal=3600.0;
nt=100.0;
dt=tfinal/nt;
outputs(1,1:6)=[t,tf,ts1,ts2,ti,ta];
beta=1.0d0/(ta+273.15);
%write initial conditions
fprintf(fid,'%10.6f %10.6f %10.6f %10.6f %10.6f %10.6f\r\n',t,tf,ts1,ts2,ti,ta);
%update each variable ts1,ts2,ti,ta to the new time step
for j=2:nt+1
ha=hac(h,rhoa,g,ta,ts2,rmua,ka,cpa);
tf=tfire(t,to);
k1s1=dt*rhss1(t,ts1,ta,tf,ks1,rhos1,cps1,li,ls2,ha);
k1s2=dt*rhss2(t,ts2,ti,ta,kbar,rhos2,cps2,ls2,li,ha);
k1i=dt*rhsi(t,ts2,ti,tf,ki,kbar,rhoi,cpi,ls2,li);
k1a= dt*rhsa(t,ts1,ts2,ta,rhoa,cpa,Va,As1,Ai,ha);
ha=hac(h,rhoa,g,ta+0.5*k1a,ts2+0.5*k1s2,rmua,ka,cpa);
tf=tfire(t+0.5*dt,to);
k2s1=dt*rhss1(t+0.5*dt,ts1+0.5*k1s1,ta+0.5*k1a,tf,ks1,rhos1,cps1,li,ls2,ha);
k2s2=dt*rhss2(t+0.5*dt,ts2+0.5*k1s2,ti+0.5*k1i,ta+0.5*k1a,kbar,rhos2,cps2,ls2,li,ha);
k2i=dt*rhsi(t+0.5*dt,ts2+0.5*k1s2,ti+0.5*k1i,tf,ki,kbar,rhoi,cpi,ls2,li);
k2a=dt*rhsa(t+0.5*dt,ts1+0.5*k1s1,ts2+0.5*k1s2,ta+0.5*k1a,rhoa,cpa,Va,As1,Ai,ha);
k3s1=dt*rhss1(t+0.5*dt,ts1+0.5*k2s1,ta+0.5*k2a,tf,ks1,rhos1,cps1,li,ls2,ha);
k3s2=dt*rhss2(t+0.5*dt,ts2+0.5*k2s2,ti+0.5*k2i,ta+0.5*k2a,kbar,rhos2,cps2,ls2,li,ha);
k3i=dt*rhsi(t+0.5*dt,ts2+0.5*k2s2,ti+0.5*k2i,tf,ki,kbar,rhoi,cpi,ls2,li);
k3a=dt*rhsa(t+0.5*dt,ts1+0.5*k2s1,ts2+0.5*k2s2,ta+0.5*k2a,rhoa,cpa,Va,As1,Ai,ha);
ha=hac(h,rhoa,g,ta+k3a,ts2+k3s2,rmua,ka,cpa);
tf=tfire(t+dt,to);
k4s1=dt*rhss1(t+dt,ts1+k3s1,ta+k3a,tf,ks1,rhos1,cps1,li,ls2,ha);
k4s2=dt*rhss2(t+dt,ts2+k3s2,ti+k3i,ta+k3a,kbar,rhos2,cps2,ls2,li,ha);
k4i=dt*rhsi(t+dt,ts2+k3s2,ti+k3i,tf,ki,kbar,rhoi,cpi,ls2,li);
k4a=dt*rhsa(t+dt,ts1+k3s1,ts2+k3s2,ta+k3a,rhoa,cpa,Va,As1,Ai,ha);
ts1=ts1+1.0/6.0*k1s1+1.0d0/3.0d0*k2s1+1.0/3.0*k3s1+1.0/6.0*k4s1;
ts2=ts2+1.0/6.0*k2s2+1.0d0/3.0d0*k2s2+1.0/3.0*k3s2+1.0/6.0*k4s2;
ti=ti+1.0/6.0*k1i+1.0d0/3.0d0*k2i+1.0/3.0*k3i+1.0/6.0*k4i;
ta=ta+1.0/6.0*k1a+1.0d0/3.0d0*k2a+1.0/3.0*k3a+1.0/6.0*k4a;
t=t+dt;
fprintf(fid,'%10.6f %10.6f %10.6f %10.6 %10.6f %10.6f\r\n',t,tf,ts1,ts2,ti,ta);
outputs(j,:)=[t,tf,ts1,ts2,ti,ta];
end
figure(1),clf(1);
t=outputs(:,1);
plot(t,outputs(:,2:end));
%subfunctions start here.
function f1=hac(h,rhoa,g,ta,ts2,rmua,ka,cpa)
beta=1.0d0/(ta+273.15);
deltat=ts2-ta;
pr=rmua*cpa/ka;
gr=h^3*rhoa^2*g*deltat*beta/rmua^2;
ra=gr*pr;
nu=(0.825+0.387*ra^(1.0/6.0)/(1.0+(0.492/pr)^(9.0/16.0))...
^(8.0/27.0))^2;
f1=nu*ka/h;
end
function f2=tfire(t,to)
f2=345.0*log10(((8.00*t)/60)+1.0)+to;
end
function f3=rhsa(t,ts1,ts2,ta,rhoa,cpa,Va,As1,Ai,ha)
f3=((ha*As1)/(rhoa*cpa*Va))*(ts1-ta)+((ha*Ai)/(rhoa*cpa*Va))*(ts2-ta);
end
function f4=rhsi(t,ts2,ti,tf,ki,kbar,rhoi,cpi,ls2,li)
f4=(2*ki)/(rhoi*cpi*li^2)*(tf-ti)-kbar/(rhoi*cpi*li)*(ti-ts2)/(0.50*(ls2+li));
end
function f5=rhss1(t,ts1,ta,tf,ks1,rhos1,cps1,li,ls2,ha)
f5=(2*ks1)/(rhos1*cps1*(li+ls2)^2)*(tf-ts1)-ha/(rhos1*cps1*(li+ls2))*(ts1-ta);
end
function f6=rhss2(t,ts2,ti,ta,kbar,rhos2,cps2,ls2,li,ha)
f6=kbar/(rhos2*cps2*ls2)*(ti-ts2)/(0.50*(ls2+li))-ha/(rhos2*cps2*ls2)*(ts2-ta);
end

2 件のコメント

Stephen23
Stephen23 2019 年 1 月 30 日
@Carl Hendrickson: for such a large amount of code it is preferable to upload it by simply clicking the paperclip button.
Jan
Jan 2019 年 1 月 30 日
編集済み: Jan 2019 年 1 月 30 日
The main part of the code has no relation to the problem. Then it simply confuses the readers. Creating the values by rand is sufficient and narrows down the problem.

サインインしてコメントする。

回答 (1 件)

Jan
Jan 2019 年 1 月 30 日
編集済み: Jan 2019 年 1 月 30 日

0 投票

I guess, that the file is written correctly, but not in the location you expect:
fid=fopen('.\temperatureparallel.dat','w');
This create the file in the current directory, but maybe this is not the folder you are looking to. Use absolute file names in general:
File = fullile(tmepdir, 'temperatureparallel.dat');
[fid, msg] = fopen(Fiel, 'w');
if fid == -1
error('Cannot open file: %s, %s', File, msg);
end

1 件のコメント

Carl Hendrickson
Carl Hendrickson 2019 年 1 月 30 日
The file is going to the correct directory. The issue now is the format of the file. The values for the individual variables are showing up but they are not in columns. This is making it hard to determine which numbers belong to which variables, the variables are:
("t","tfire","ts1","ts2","ti","ta").
I believe this has to do with the line:
fprintf(fid,'%10.6f %10.6f %10.6f %10.6 %10.6f %10.6f\r\n',t,tf,ts1,ts2,ti,ta);
but was not sure how to format it so the data file showed the variables with the calculated values tabulated in columns.

サインインしてコメントする。

カテゴリ

ヘルプ センター および File Exchange で Application Deployment についてさらに検索

質問済み:

2019 年 1 月 30 日

コメント済み:

2019 年 1 月 30 日

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by