How to model backlash in translation ( or slackness) in a revolute joint in simscape second generation?

Question

Rajesh Kumar 2016 年 7 月 8 日

0
リンク

この質問への直接リンク

https://jp.mathworks.com/matlabcentral/answers/294380-how-to-model-backlash-in-translation-or-slackness-in-a-revolute-joint-in-simscape-second-generat

回答済み: Daniel Stuewe 2016 年 9 月 29 日

I want to introduce slackness in all the revolute joint , that is due to clearance joint need to introduce some play in the joint.

0 件のコメント
-2 件の古いコメントを表示-2 件の古いコメントを非表示

サインインしてコメントする。

サインインしてこの質問に回答する。

Answer 1

Daniel Stuewe 2016 年 9 月 29 日

0
リンク

この回答への直接リンク

https://jp.mathworks.com/matlabcentral/answers/294380-how-to-model-backlash-in-translation-or-slackness-in-a-revolute-joint-in-simscape-second-generat#answer_236704

Rajesh,

I've had some luck using a planar joint with hard stops constraining the translational degrees of freedom. I'm modeling a four-bar linkage and i'm able to model the oversized holes in one link (two revolute joints), but when I replace the third revolute joint with a planar joint the model does not assemble correctly. I think this is a very basic capability that Multi-body should have since in the real world joints are not perfect.

Dan