Error using sub2ind out of range subscript
7 ビュー (過去 30 日間)
古いコメントを表示
clear all ;
global theta sigma tau rho
theta =0.9563E0 ; sigma = 1.0243E0 ; tau =0.05803E0 ; rho= -0.04266E0 ;
n_star1=zeros(3,1); n_star2= zeros(3,1); b_star1=zeros(3,1);
b_star2=zeros(3,1);m_star1=zeros(3,1);m_star2=zeros(1,3);
a_star1=zeros(3,1);a_star2=zeros(3,1);kappa_1=1;kappa_2=-1;
U1(1,1)= theta ; U1(1,2)= rho ;U1(1,3)= rho; U1(2,1)=U1(1,2);
U1(2,2)= sigma ; U1(2,3) = tau; U1(3,1)=U1(1,3);
U1(3,2)=U1(2,3); U1(3,3)= sigma;
U2(1,1)= theta; U2(1,2)= -rho; U2(1,3)= -rho; U2(2,1)=U2(1,2);
U2(2,2)= sigma ; U2(2,3) = tau; U2(3,1)=U2(1,3);
U2(3,2)=U2(2,3); U2(3,3)= sigma;
U3(1,1)= theta; U3(1,2)= -rho; U3(1,3)= rho; U3(2,1)=U3(1,2);
U3(2,2)= sigma ; U3(2,3) = -tau; U3(3,1)=U3(1,3);
U3(3,2)=U3(2,3); U3(3,3)= sigma;
U4(1,1)= theta; U4(1,2)= rho; U4(1,3)= -rho; U4(2,1)=U4(1,2);
U4(2,2)= sigma ; U4(2,3) = -tau; U4(3,1)=U4(1,3);
U4(3,2)=U4(2,3); U4(3,3)= sigma;
U5(1,1)= sigma; U5(1,2)= rho; U5(1,3)= tau; U5(2,1)=U5(1,2);
U5(2,2)= theta ; U5(2,3) = rho; U5(3,1)=U5(1,3);
U5(3,2)=U5(2,3); U5(3,3)= sigma;
U6(1,1)= sigma; U6(1,2)= -rho; U6(1,3)= tau; U6(2,1)=U6(1,2);
U6(2,2)= theta ; U6(2,3) = -rho; U6(3,1)=U6(1,3);
U6(3,2)=U6(2,3); U6(3,3)= sigma;
U7(1,1)= sigma; U7(1,2)= -rho; U7(1,3)= -tau; U7(2,1)=U7(1,2);
U7(2,2)= theta ; U7(2,3) = rho; U7(3,1)=U7(1,3);
U7(3,2)=U7(2,3); U7(3,3)= sigma;
U8(1,1)= sigma; U8(1,2)= rho; U8(1,3)= -tau; U8(2,1)=U8(1,2);
U8(2,2)= theta ; U8(2,3) = -rho; U8(3,1)=U8(1,3);
U8(3,2)=U8(2,3); U8(3,3)= sigma;
U9(1,1)= sigma; U9(1,2)= tau; U9(1,3)= rho; U9(2,1)=U9(1,2);
U9(2,2)= sigma ; U9(2,3) = rho; U9(3,1)=U9(1,3);
U9(3,2)=U9(2,3); U9(3,3)= theta;
U10(1,1)= sigma; U10(1,2)= tau; U10(1,3)= -rho; U10(2,1)=U10(1,2);
U10(2,2)= sigma ; U10(2,3) = -rho; U10(3,1)=U10(1,3);
U10(3,2)=U10(2,3); U10(3,3)= theta;
U11(1,1)= sigma; U11(1,2)= -tau; U11(1,3)= rho; U11(2,1)=U11(1,2);
U11(2,2)= sigma ; U11(2,3) = -rho; U11(3,1)=U11(1,3);
U11(3,2)=U11(2,3); U11(3,3)= theta;
U12(1,1)= sigma; U12(1,2)= -tau; U12(1,3)= -rho; U12(2,1)=U12(1,2);
U12(2,2)= sigma ; U12(2,3) = rho; U12(3,1)=U12(1,3);
U12(3,2)=U12(2,3); U12(3,3)= theta;
C1= inv(U1)*U3*U3*inv(U1);
[V, N]=eig(C1);
lambda_3= N(1,1);lambda_2= N(2,2); lambda_1= N(3,3); *% Error was being shown in this line*
e3 = V(1:3,1) ;e2=V(1:3,2) ;e1=V(1:3,3);
Also, explain me the meaning of this error :
Error in sym/subsref (line 766) R_tilde = sub2ind(size(L), Idx.subs{:});
0 件のコメント
回答 (2 件)
Ced
2016 年 3 月 26 日
Your code runs without error for me.
Why do you have the variables declared as global? This is something to avoid whenever possible (aka always), and I don't see a reason to have global variables here.
Also, the error seems to come from a symbolic call, but I don't see any symbolic variables in that code?
Try to copy the script to some other location ( to check if you have overshadowing functions that could cause the problem ), and remove the global declaration, and try running the code again.
0 件のコメント
dpb
2016 年 3 月 26 日
編集済み: dpb
2016 年 3 月 26 日
Ugleee code to the extreme... :(
Format your code; don't use run-on continuation lines wildly.
One way to build the initial matrices that is at least a little bit more readable and simpler to debug if nothing else would be
>> U1=diag([theta sigma sigma],0) + ...
diag([rho tau],-1) + ...
diag(rho,-2); % load lower triagonal
>> U1=U1+tril(U1,-1).' % load upper triagonal from lower transpose
U1 =
0.9563 -0.0427 -0.0427
-0.0427 1.0243 0.0580
-0.0427 0.0580 1.0243
>>
There is no indexing problem on the line marked; the ind2sub message is from a symbolic toolbox function call and there's no symbolic in sight in the above code snippet.
0 件のコメント
参考
カテゴリ
Help Center および File Exchange で Function Creation についてさらに検索
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!