- Break down your complex mechanism into smaller subsystems or branches.
- Refer to following documentation of how to do so:
- https://www.mathworks.com/help/simulink/ug/creating-subsystems.html
- Each subsystem can be represented as a separate model or a masked subsystem within the larger model.
- Place an Inertia Sensor block at strategic locations within each branch or subsystem
- Configure each sensor to measure the inertia of the specific group of connected blocks that make up the branch.
- If built in Inertia Sensor does not directly support we can consider to write MATLAB scripts to calculate composite inertia manually.
Simscape multibody composite rigid body inertia
32 ビュー (過去 30 日間)
古いコメントを表示
Howdy,
I'm working with simscape multibody and I've seen using inertia sensor there's chance to select a local group of connected blocks or whole mechanicsms. I was wondering if for a complex branched mechanism would be possible to take also a composite rigid body inertia measure (using actual configurations given by joints positions) for single branches in palce of whole mechanism of any workaround exist for.
Cheers,
Soldà Enrico
1 件のコメント
Anurag Ojha
2024 年 8 月 18 日 15:16
編集済み: Anurag Ojha
2024 年 8 月 18 日 15:25
Hey
As the default behavior of the Inertia Sensor block is to measure the inertia of either the entire mechanism or a local group of connected blocks. However, we can achieve the desired measurement by using a combination of techniques and a bit of creativity.
Here is how I would approach the problem:
Let me know if this works!
回答 (0 件)
参考
カテゴリ
Help Center および File Exchange で Applications についてさらに検索
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!