Why is my second plot only coming up when I run the program?

I have a function file and script file that both work well together, but out of the two plots I am trying to show when I run the program, only the second one shows up. Can anyone tell me why this is happening?

My function file:

function    ff = fCW()
        F = @(f,Re) 2*log10(Re*sqrt(f))-0.8-(1/sqrt(f));  
        Re = linspace(1e4,1e7,121);                         
        ff = zeros(size(Re));
        for k = 1:length(Re)
            ff(k) = fzero( @(f) F(f,Re(k)), 0.05 );
        end
end

My script file:

FCW = fCW();
Re1=linspace(1e+4,1e+7,121); NRe1=length(Re1);
fB = zeros(size(Re1)); fSJ = fB;
for i=1:NRe1
    fSJ(i)=0.25/(log10(5.74/Re1(i)^0.9))^2;
    fB(i)=0.3164/Re1(i)^0.25;
end

plot(Re1, FCW, Re1, fSJ, Re1, fB)
xlabel('Reynolds Number'); ylabel('Dimensionless Friction Factor');
title('Three Friction Factor Correlations for Smooth Pipes')
legend('Colebrook-White Correlation', 'Swamee-Jain Correlation',...
    'Blasius Correlation')

plot(fB,FCW,fSJ,FCW)
xlabel('Dimensionless Friction Factor');
ylabel('Dimensionless Friction Factor');
legend('Ratio of Blasius to Colebrook-White Correlation',...
    'Ratio of Swamee-Jain to Colebrook-White Correlation')

Answer 1

[Star Strider]

MATLAB will plot in the same open axes object unless it to create a new one.

Do this:

figure(1)
plot(Re1, FCW, Re1, fSJ, Re1, fB)
   ... CODE ...

figure(2)
plot(fB,FCW,fSJ,FCW)
   ... CODE ...

and they should both be visible (although you will probably have to toggle between them or offset them from one another to see them both).

[Yianni]

It works! Thank you again, you have been very helpful.

[Star Strider]

My pleasure!