# How to plot coordinate data to appear solid with lighting effect?

4 ビュー (過去 30 日間)
Jan Filip 2021 年 10 月 1 日
コメント済み: Jan Filip 2021 年 10 月 2 日
I have quite delicate problem.
In the for loop I am plotting these circles using
plot3(x,y,z) so after number of iteration it make this body of a certain shape.
I was searching everywhere but is it possible to plot these points to look more like solid/surface with lighting like as in the example below The problem is that quite often these surfaces will cross itself like in the example here so I also need to setup opacity of the resulting surface to see through.
I cannot provide any data because they are huge, but I would be gratefull for similar problem because I tried everything.

サインインしてコメントする。

### 回答 (2 件)

Kevin Holly 2021 年 10 月 1 日

There may be a better way doing it. Here is my attempt:
x1 = 0;
x2 = 0;
y1 = -.8; % value based on angle of 25 degrees
y2 = .8; % value based on angle of 25 degrees
eccentricity = .78;
numPoints = 300; % Less for a coarser ellipse, more for a finer resolution.
% Make equations:
a = (1/2) * sqrt((x2 - x1) ^ 2 + (y2 - y1) ^ 2);
b = a * sqrt(1-eccentricity^2);
t = linspace(0, 2 * pi, numPoints); % Absolute angle parameter
X = a * cos(t);
Y = b * sin(t);
% Compute angles relative to (x1, y1).
angles = atan2(y2 - y1, x2 - x1);
x = (x1 + x2) / 2 + X * cos(angles) - Y * sin(angles);
y = (y1 + y2) / 2 + X * sin(angles) + Y * cos(angles);
figure
subplot (2,2,1)
plot3(x,y,zeros(size(y)))
hold on
plot3(x,y,0.5*ones(size(y)))
hold on
plot3(x,y,ones(size(y)))
axis equal
X = [x x x];
Y = [y y y];
Z = [zeros(size(y)) 0.5*ones(size(y)) ones(size(y))];
T=delaunayTriangulation(X',Y',Z');
% Generate solid object
subplot (2,2,2)
% hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.5,'EdgeColor','none','FaceLighting','phong');
hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.5,'EdgeColor','none','FaceLighting','gouraud');
light('Position',[-10 -10 10],'Style','local')
light('Position',[-10 -10 -10],'Style','local')
subplot (2,2,3)
% hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.5,'EdgeColor','none','FaceLighting','phong');
hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.2,'EdgeColor','none','FaceLighting','gouraud');
light('Position',[-10 -10 10],'Style','local')
light('Position',[-10 -10 -10],'Style','local')
subplot (2,2,4)
% hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.5,'EdgeColor','none','FaceLighting','phong');
hObj = tetramesh(T,ones(size(T)),'FaceAlpha',0.1,'EdgeColor','none','FaceLighting','gouraud');
light('Position',[-10 -10 10],'Style','local')
light('Position',[-10 -10 -10],'Style','local') ##### 1 件のコメント表示 なし非表示 なし
Jan Filip 2021 年 10 月 1 日
Thank you for your attempt, but this one will fail for cases with iteself colliding surfaces

サインインしてコメントする。

Kelly Kearney 2021 年 10 月 1 日
The following example shows a relatively simple way to create patch surfaces that connect each circle to the adjacent one (assuming that all of your circles include the same number of vertices).
% Coordinates for 3 simple test circles
nv = 50;
th = linspace(0,2*pi,nv);
r = [10; 5; 6; 8];
z = [0; 1; 2; 1.5];
x = r.*cos(th);
y = r.*sin(th);
z = zeros(size(x))+z;
x = x'; y = y'; z = z';
% Calculate surface patch coordinates by connecting each
% circle to the adjacent one
ncirc = size(x,2);
[c0,v0] = ndgrid(1:ncirc-1, 1:nv-1);
cidx = c0(:) + [0 1 1 0 0];
vidx = v0(:) + [0 0 1 1 0];
idx = sub2ind(size(x), vidx, cidx);
xs = x(idx');
ys = y(idx');
zs = z(idx');
% Plot
hp = patch(xs, ys, zs, 'b');
view(3);
set(hp, 'facealpha', 0.8, 'edgecolor', 'none');
hold on;
plot3(x,y,z, 'k');
camlight You'll probably have to play around with lighting and transparency, but this should be robust even if your circles overlap or reverse direction, as I've shown with the last two in this example.
##### 2 件のコメント表示 1 件の古いコメント非表示 1 件の古いコメント
Jan Filip 2021 年 10 月 2 日
This is indeed an improvement but the problem with this approach is that the lighting is effectively not seen because the step size between circles is (and must be) small so calling camplight in each iteration produce nothing for the whole 'object'.

サインインしてコメントする。

### カテゴリ

Help Center および File ExchangeLighting, Transparency, and Shading についてさらに検索

R2019a

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!