How do I process this netcdf file?

2 ビュー (過去 30 日間)
kopparthi
kopparthi 2013 年 10 月 30 日
回答済み: Ashish Uthama 2013 年 10 月 30 日
[Edit - code formatting]
>> ncdisp('NRB_2000nw1.nc');
Source:
D:\sunil\NRB_III_SWM_AUG2013\NRB_2000nw1.nc
Format:
classic
Global Attributes:
CREATION_DATE = '26-09-2013'
MOORING = 'NRB1A'
platform_type = 'mooring'
DEPLOYMENT_DATE = '24-08-2013'
RECOVERY_DATE = '05-09-2013'
INST_TYPE = 'RDI INSTRUMENTS ADCP'
latitude = 18.6
latitude_units = 'Degree_North'
longitude = 84.8
longitude_units = 'Degree_East'
FIRMWARE_VERSION = 50.4
FREQUENCY = 300
beam_width = 4
BEAM_PATTERN = 'CONVEX'
SYSTEM_CONFIG = 1
IS_TRANSDUCER_ATTACHED = 'YES'
ORIENTATION = 'UP'
BEAM_ANGLE = 20
JANUS = '4 BEAM'
SIMULATED_DATA = 0
LAG_LENGTH = 53
BEAMS_IN_VELOCITY_CALC = 4
PINGS_PER_ENSEMBLE = 34
PROFILING_MODE = 1
PRED_ACCURACY = 0.61
VALID_CORRELATION_RANGE = [6.40e+01 2.55e+02]
CODE_REPETITION = 9
minmax_percent_good = [0.00e+00 1.00e+02]
error_velocity_threshold = 2e+03
TIME_BETWEEN_PING_GROUPS = 0.88
TRANSFORM = 'Earth '
sound_speed_computed_from_ED_ES_ET = 'YES '
ED_taken_from_depth_sensor = 'YES '
EH_taken_from_xducer_heading_sensor = 'YES '
EP_taken_from_xducer_pitch_sensor = 'YES '
ER_taken_from_xducer_roll_sensor = 'YES '
ET_taken_from_temperature_sensor = 'YES '
Depth_sensor = 'YES '
heading_sensor = 'YES '
pitch_sensor = 'YES '
roll_sensor = 'YES '
conductivity_sensor = 'NO '
temperature_sensor = 'YES '
transmit_pulse_length_cm = 447
Starting_water_layer = 1
Ending_water_layer = 5
false_target_reject_values = [5.00e+01 2.55e+02]
transmit_lag_distance = 50
ADCP_SERIAL_NO = 3.59e+03
Center_first_bin = 6.25
blanking_distance = 1.76
bin_size = 4
bin_count = 25
water_depth = 104
water_depth_source = 'Water depth from user input by rdi2cdf'
water_depth_datum = 'MSL'
xducer_offset_from_bottom = 7
WATER_DEPTH = 89.4
initial_instrument_height = 7
initial_instrument_height_note = 'height in meters above bottom: accurate for tripod mounted instruments'
nominal_sensor_depth = 82.4
nominal_sensor_depth_note = 'inst_depth = (water_depth - inst_height); nominal depth below surface'
transform = 'EARTH'
DATA_TYPE = 'ADCP'
DATA_SUB_TYPE = 'MOORED'
COORD_SYSTEM = 'GEOGRAPHIC'
WATER_MASS = '?'
POS_CONST = 0
DEPTH_CONST = 0
DRIFTER = 0
WATER_DEPTH_SOURCE = 'Water depth from user input by rdi2cdf'
VAR_FILL = 1e+35
Conventions = 'EPIC/PMEL'
EXPERIMENT = 'cruise'
PROJECT = 'GAP2659'
DESCRIPT = 'NRB 2'
DATA_CMNT = 'none'
magnetic_variation_at_site = -0.869
magnetic_variation_applied = -0.869
FILL_FLAG = 0
COMPOSITE = 0
DELTA_T = '029'
start_time = '23/08/2013 09:00:00'
stop_time = '08/09/2013 07:45:59'
salinity_set_by_user = 35
salinity_set_by_user_units = 'PPT'
VAR_DESC = 'bindist:ensemble:u:v:w:Werr:COR:AGC:PGd:brange:Tx:SV:Hdg:Ptch:Roll:P:SDP'
Dimensions:
Lon = 1
Lat = 1
Depth = 21
Time = 45933
Variables:
Lon
Size: 1x1
Dimensions: Lon
Datatype: single
Attributes:
long_name = 'Longitude'
units = 'Degree_East'
Lat
Size: 1x1
Dimensions: Lat
Datatype: single
Attributes:
long_name = 'Latitude'
units = 'Degree_Nort'
Depth
Size: 21x1
Dimensions: Depth
Datatype: single
Attributes:
long_name = 'Depth (m)'
units = 'meters'
blanking_distance = 1.76
bin_size = 4
Center_first_bin = 6.25
xducer_offset_from_bottom = 7
Time
Size: 45933x1
Dimensions: Time
Datatype: single
Attributes:
long_name = 'Time'
units = 'hours'
time_origin = '23-AUG-2013 09:00:00'
u_1205
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'u'
long_name = 'Eastward Velocity'
missing_value = 1e+05
_FillValue = 1e+35
units = 'cm/s'
v_1206
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'v'
long_name = 'Northward Velocity'
missing_value = 1e+05
_FillValue = 1e+35
units = 'cm/s'
w_1204
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'W'
long_name = 'Vertical Velocity'
missing_value = 1e+05
_FillValue = 1e+35
units = 'cm/s'
Werr_1201
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'EVEL'
long_name = 'Error Velocity'
missing_value = 1e+05
_FillValue = 1e+35
units = 'cm/s'
COR_1201
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'AGC'
long_name = 'Average Correlation'
units = 'counts'
AGC_1202
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'AGC'
long_name = 'Average Echo Intensity'
units = 'counts'
PGd_1203
Size: 1x1x21x45933
Dimensions: Lon,Lat,Depth,Time
Datatype: single
Attributes:
name = 'PGD'
long_name = 'Percent Good Pings'
units = 'cm/s'
Brange
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'Brange'
long_name = 'range from ADCP head to boundary'
units = 'm'
Tx_1211
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'TX'
long_name = 'ADCP Transducer Temp.'
units = 'Degree C.'
Hdg_1215
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'HD'
long_name = 'INST Heading'
units = 'Degrees'
Ptch_1216
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'PTCH'
long_name = 'INST Pitch'
units = 'Degrees'
Roll_1217
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'ROLL'
long_name = 'INST Roll'
units = 'Degrees'
P_1294
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'PRESSURE'
long_name = 'ADCP Pressure at Transducer Head'
units = 'deca-pascals'
SDP_850
Size: 1x1x45933
Dimensions: Lon,Lat,Time
Datatype: single
Attributes:
name = 'PRESSURE'
long_name = 'STAND. DEV. (PRESS)'
units = 'mbar'
>>

採用された回答

Ashish Uthama
Ashish Uthama 2013 年 10 月 30 日
It looks like you have already discovered ncdisp, have a look at other functions in the same family: ncread and ncinfo. If you are just starting with NetCDF, have a look at the examples in the links above, it should give you enough information to extract data from your file.
If you have more questions, please add a more detailed description on what you need help with.

その他の回答 (0 件)

カテゴリ

Help Center および File ExchangeNetCDF についてさらに検索

タグ

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by