Parameters and Procedures
Prepare your design for generating a real-time application by updating your Simulink model. Select a fixed-step solver and select Simulink Real-Time™ as the code generator target. Extend your Simulink model with blocks from the Speedgoat I/O Blockset or the Simulink Real-Time block library. Make signal connections between these driver blocks and other blocks in your model, then build the real-time application.
|Log level||Selects filtering level for system log messages|
|Force polling mode||Enables polling mode — instead of interrupt-driven mode — for clocking the real-time application|
|Max file log runs||Selects the number of file log runs to retain for the real-time application|
|Compile with GCC -ffast-math||Enables the GCC compiler |
|Stop time||Simulation stop time|
|Represent application files on development computer|
|Add a parameter set to a real-time application|
|Generate ASAP2 (A2L) file according to ASAM MCD-2 MC standards|
|Extract generated A2L file from real-time application file|
|Get real-time application information|
|Get real-time application parameters|
|Returns root level inports in application|
|Get real-time application signals|
|Pack the ASAP2 file into application|
|Update the auto save parameter set on stop for an application|
|Replace external input data in real-time application with input data|
|Update the startup parameter set for an application|
- I/O Driver Blocks
Learn about the Simulink Real-Time I/O library of driver blocks.
- Add I/O Blocks to Simulink Model
Interface with boards by using Simulink Real-Time library blocks.
- Configure Block Parameters
Configure model blocks.
- Define and Update Inport Data
Map root inports to source data.
- Simulink Real-Time Options Pane
Configure initial values for real-time application options.