メカニズム
R2026b車輪や車軸などのシンプルな位置および角度ベースのメカニズム
このライブラリには、シンプルな位置および角度ベースのメカニズムを表すブロックが含まれます。
Simscape ブロック
 | Cam and Follower (AB-PB) | Position-and-angle-based cam and follower mechanism (R2026a 以降) |
 | Gear Box (AB) | Gear box mechanism in angle-based rotational systems (R2026b 以降) |
 | Lever (AB-PB) | Position-and-angle-based lever mechanism (R2026b 以降) |
 | Slider-Crank (AB-PB) | Position-and-angle-based slider-crank mechanism (R2026b 以降) |
 | Wheel and Axle (AB-PB) | Position-and-angle-based wheel and axle mechanism (R2026a 以降) |
関連情報
注目の例
Interfacing Angle-Based Rotational and Position-Based Translational Networks
Demonstrates how you can define positive directions for translation and rotation in your physical view and adjust the Simscape™ network to achieve the desired behavior. It highlights the flexibility of Simscape in mapping physical directions to schematic representations.
Camshaft
Model a camshaft using Cam and Follower (AB-PB) blocks. The camshaft has four cams, each driving a knife-edge follower on a spring. This example describes how to set up the cam profile, offset angles between the cams, and initial conditions.
