(Not recommended) Connect serial port object to device
fopen(obj) connects the serial port object,
obj to the device.
This example creates the serial port object
s to the device using
fopen, writes and
reads text data, and then disconnects
s from the device. This example
works on a Windows® platform.
s = serial('COM1'); fopen(s) fprintf(s,'*IDN?') idn = fscanf(s); fclose(s)
Before you can perform a read or write operation,
obj must be
connected to the device with the
fopen function. When
obj is connected to the device:
Data remaining in the input buffer or the output buffer is flushed.
Status property is set to
properties are set to 0.
An error is returned if you attempt to perform a read or write operation while
obj is not connected to the device. You can connect only one
serial port object to a given device.
Some properties are read-only while the serial port object is open (connected), and
must be configured before using
fopen. Examples include
Refer to the property reference pages to determine which properties have this
The values for some properties are verified only after
connected to the device. If any of these properties are incorrectly configured, then an
error is returned when
fopen is issued and
is not connected to the device. Properties of this type include
BaudRate, and are associated with device settings.
serialobject interface is not recommended
Not recommended starting in R2019b