Problem 59034. Compute the maximum length of a contaminant plume in groundwater

Problem statement
Write a function to compute the maximum length of a contaminant plume for steady, one-dimensional transport in groundwater. The leaking source has a constant concentration of C0, and the end of the plume for each contaminant is taken to be where the concentration equals some limit (e.g., the U.S. Environmental Protection Agency’s maximum contaminant level, or MCL). Assume the aquifer to be infinite and initially clean. Relevant properties of the confined aquifer are the hydraulic conductivity K, the magnitude of the head gradient |dh/dx|, effective porosity ne, bulk density rhob, and soil organic fraction phio. Along with the MCLs, the properties of the contaminants provided to the function are the half life T_1/2 and the octanol-water partition coefficient Koc.
Compute the longitudinal dispersion coefficient as DL = aLvL, where vL = (K/ne)|dh/dx| is the average linear velocity and aL is the longitudinal dispersivity. The variable aL will be specified as either a number or ‘X&E’. In the latter case, compute the longitudinal dispersivity with the empirical formula of Xu & Eckstein (1995):
aL = 0.83(log10(L))^2.414
where aL is in meters if the flow length L is in meters. Take the flow length to be the length of the plume—that is, guess a plume length, compute the new plume, and repeat until the plume length stops changing.
Background
Contaminants in groundwater are subject to advection, retardation, dispersion, and degradation. If the transport is assumed to be one-dimensional, then the variation of the concentration C of the contaminant in time t and spatial coordinate x can be computed with
dC/dt + (vL/R)dC/dx = (DL/R) d^2C/dx^2 - lam C
The four terms represent the effects of unsteadiness, advection, dispersion, and degradation, where lam = ln(2)/T_1/2. Retardation is included in the retardation coefficient R = 1+rhobKoc phio/ne. The maximum length occurs when all processes have had sufficient time to operate—that is, in steady state. In that case, the first term can be ignored, and the equation becomes a second-order linear ordinary differential equation with constant coefficients, which can be solved with the boundary conditions C(0) = C0 and C(infinity) = 0.
Solve

Solution Stats

50.0% Correct | 50.0% Incorrect
Last Solution submitted on Oct 11, 2024

Problem Comments

Solution Comments

Show comments

Problem Recent Solvers2

Suggested Problems

More from this Author281

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!