problem with F28379D

Hello , I am trying to give simple pulse output to GPIO to blink LED in F28379D Launchpad, but it dose not working.

and recevied this messge.

How to solve this issue? I am using MATLAB 2020A.

thanks in advance.

The following error occurred during deployment to your hardware board:

Debug Server Scripting (DSS) error:

*** User inputs:

Target Configuration: undefined

Program Name: undefined

Board Name: unspecified (connect to first board)

CPU Name: unspecified (connect to first CPU)

Hardware Name: unspecified

*** Starting debug session...

SEVERE: Cannot read System Setup data from XML file C:\Users\User\MATLAB\Micro_controller_ert_rtw\undefined

Error parsing file:

Fatal Error at (0, 0): An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\Users\User\MATLAB\Micro_controller_ert_rtw\undefined

SEVERE: Could not start server: DebugServer.1: Cannot read System Setup data from XML file C:\Users\User\MATLAB\Micro_controller_ert_rtw\undefined

Error parsing file:

Fatal Error at (0, 0): An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\Users\User\MATLAB\Micro_controller_ert_rtw\undefined

*** Cannot create a valid debug session for Board/CPU=*/*.

Make sure this matches only one board and one CPU.

Exiting...

[SALAH alatai]

up

[SALAH alatai]

anyone can help ?

[Lenos Peratitis]

Hi all, I am having the same problem as the OP, any updates yet?

Thank you in advance for your time.

[SALAH alatai]

still no updates.

[Amirreza Poorfakhraei]

Guys the problem is with the latest versions of CCS (10.30).

Download and install CCS 10.11. It solves the issue.

[SALAH alatai]

Ok noted. I will remove ccs 10.3 and install 10.11 or 10.2. Thanks

[Ethelbert Ezemobi]

Thank you very much. I confirm that the problem is with 10.3 version

[Donald]

We are having the same issue wih Matlab 2020a and CCS 10.3.

Is there any update?

We will try uninstalling 10.3 and install 10.2.

[Donald]

We are using F28075 processor

[SALAH alatai]

Try with the oldest CCS version Like 10.1 or 10.2

[Donald]

We removed 10.3.1 and installed 10.2 and that fixed the problem!

Thanks for your post!!

[SALAH alatai]

You are welcome

[Moise Cristi]

@SALAH alatai can you help me with this problem, please!

[SALAH alatai]

Check the usb com in the device and in hardware implementation It should be same like com2 or com4 or com6 depends on ur computer

[SALAH alatai]

[Moise Cristi]

I did it but I still have the same problem. Can you contact me on email or on fb to help me, please! I dont know what I m doing wrong. ([e-mail])

Thank you!

Answer 1

[SALAH alatai]

The problem was with the latest versions of CCS (10.30), after install the oldest version 10.2 no problem and the F28379D Launchpad is working.

[Muhammad Jibran Ejaz]

This solved my problem. I had spent a whole week trying different remidies but never thought the solution was this simple.

[SALAH alatai]

Yes was a simple way to solve after taking long time for trying.

[Sangmesh Malge]

Thank you Salah.. I also had same problem. 10.2 works for me

[SALAH alatai]

you are welcome. good luck

[Moise Cristi]

Hi, I`m using the same F28379D Launchpad and trying to do the same thing like you but I still have an error. I have installed Matlab2019a, CCS v11.0.0 and controlSUITE 3.4.9. Did you made other additional settings than Hardware Implementation? Because then I build I get this error (please see the attachment)

Thank you!

[abdelhak boudallaa]

Hello doctor;

I used matlab 2018a CCS10.2, and always I have this problem of cofiguration of F28379D launchpad.

can you help me solve this problem?

C:\Users\ADL\Desktop\these mod\Projet_Master\commande_vectorielle_PWM_V7_ert_rtw>exit /B 0

Downloading program to the target hardware...

### Build procedure for model: 'commande_vectorielle_PWM_V7' aborted due to an error.

The following error occurred during deployment to your hardware board:

Debug Server Scripting (DSS) error:

*** User inputs:

Target Configuration: C:\PROGRA~3\MATLAB\SUPPOR~1\R2018a\toolbox\target\SUPPOR~1\tic2000/CCS_CO~1/F28379~1.CCX

Program Name: C:\Users\ADL\Desktop\THESEM~1\PROJET~1\COBFCB~1.OUT

Board Name: *

CPU Name: C28xx_CPU1

Hardware Name: TI_Delfino_F2837xD

*** Starting debug session...

SEVERE: IcePick_C_0: Error connecting to the target: (Error -151 @ 0x0) One of the FTDI driver functions used during the connect returned bad status or an error. The cause may be one or more of: no XDS100 is plugged in, invalid XDS100 serial number, blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable. Use the xds100serial command-line utility in the 'common/uscif' folder to verify the XDS100 can be located. (Emulation package 8.1.0.00012)

SEVERE: emulation failure occurred

SEVERE: Error connecting to the target: emulation failure occurred

*** Cannot create a valid debug session for Board/CPU=*/C28xx_CPU1.

Make sure this matches only one board and one CPU.

Exiting...

[Walter Roberson]

@abdelhak boudallaa

Did you try using the xds100serial command-line utility in the 'common/uscif' folder to check whether the XDS100 can be located?