Plotting path traced by a point in an animation
12 ビュー (過去 30 日間)
古いコメントを表示
The following code creates an animation of a four bar linkage. Can someone explain how you can modify the code to plot the path traced by point P during the animation? I have tried creating an animated line by using a separate for loop and adding plot commands inside the for i = 1:length(theta2) for loop but when that is done the point P's path is plotted but because of the hold on and hold off commands the path is deleted at every instant and at any given moment only the point P is located at during that instant is plotted.
L0 = 7; L1 = 3; L2 = 7.5; L3 = 4.5;
L_PA = 4; alpha =35;
w2 = 5; theta2 = 0:2:360;
for i = 1:length(theta2)
AC(i) = sqrt(L0^2+L1^2 - 2*L0*L1*cosd(theta2(i)));
beta(i) = acosd((L0^2+AC(i)^2-L1^2)/(2*L0*AC(i)));
psi(i) = acosd((L2^2+AC(i)^2-L3^2)/(2*L2*AC(i)));
lamda(i) = acosd((L3^2+AC(i)^2-L2^2)/(2*L3*AC(i)));
theta3(i) = psi(i)-beta(i);
theta4(i) = 180-lamda(i)-beta(i);
if theta2(i)>180
theta3(i) = psi(i)+beta(i);
theta4(i) = 180-lamda(i)+beta(i);
end
Ox(i) = 0; Oy(i) = 0;
Ax(i) = Ox(i) + L1*cosd(theta2(i));
Ay(i) = Oy(i) + L1*sind(theta2(i));
Bx(i) = Ox(i) +Ax(i) + L2*cosd(theta3(i));
By(i) = Oy(i) +Ay(i) + L2*sind(theta3(i));
Cx(i) = L0; Cy(i) = 0;
Px(i) = Ax(i) +L_PA *cosd(alpha + theta3(i));
Py(i) = Ay(i) +L_PA *sind(alpha + theta3(i));
theta5(i) = alpha + theta3(i);
plot([Ox(i) Ax(i)],[Oy(i) Ay(i)], [Ax(i) Bx(i)],...
[Ay(i) By(i)]...
,[Bx(i) Cx(i)],[By(i) Cy(i)],'LineWidth',3);
hold on
plot([Ax(i) Px(i)],[Ay(i) Py(i)],...
[Bx(i) Px(i)],[By(i) Py(i)],'LineWidth',3);
grid on;
axis equal;
axis([-5 15 -5 10]);
drawnow;
hold off
end
0 件のコメント
採用された回答
Cris LaPierre
2021 年 2 月 15 日
編集済み: Cris LaPierre
2021 年 2 月 15 日
I would suggest pulling all the calculations out of the for loop. You can take advantage of MATLAB's vector math to calculate all the results and even plot the starting configuration. Then use a loop to update the XData and YData values of the links. This way, you have access to all the data and can follow a similar approach to create a line that traces P.
L0 = 7; L1 = 3; L2 = 7.5; L3 = 4.5;
L_PA = 4; alpha =35;
w2 = 5; theta2 = 0:2:360;
% Convert operators on vectors to elementwise operators
AC = sqrt(L0^2+L1^2 - 2*L0*L1*cosd(theta2));
beta = acosd((L0^2+AC.^2-L1^2)./(2*L0*AC));
psi = acosd((L2^2+AC.^2-L3^2)./(2*L2*AC));
lamda = acosd((L3^2+AC.^2-L2^2)./(2*L3*AC));
% These 2 lines might be a little tricky. Break it into parts to figure out how it works.
theta3 = (theta2<=180).*(psi-beta) + (theta2>180).*(psi+beta);
theta4 = (theta2<=180).*(180-lamda-beta) + (theta2>180).*(180-lamda+beta);
Ox = 0; Oy = 0;
Ax = Ox + L1*cosd(theta2);
Ay = Oy + L1*sind(theta2);
Bx = Ox +Ax + L2*cosd(theta3);
By = Oy +Ay + L2*sind(theta3);
Cx = L0; Cy = 0;
Px = Ax +L_PA *cosd(alpha + theta3);
Py = Ay +L_PA *sind(alpha + theta3);
theta5 = alpha + theta3;
% Create the original figure by plotting just the first points in the vectors
AB = plot([Ox Ax(1)],[Oy Ay(1)], ...
[Ax(1) Bx(1)],[Ay(1) By(1)],...
[Bx(1) Cx],[By(1) Cy],'LineWidth',3);
hold on
ABP = plot([Ax(1) Px(1)],[Ay(1) Py(1)],...
[Bx(1) Px(1)],[By(1) Py(1)],'LineWidth',3);
hold off
grid on;
axis equal;
axis([-5 15 -5 10]);
% Use the loop to step though all the link positions, updating the corresponding X and Y values
for i = 2:length(theta2)
AB(1).XData = [Ox Ax(i)];
AB(1).YData = [Oy Ay(i)];
AB(2).XData = [Ax(i) Bx(i)];
AB(2).YData = [Ay(i) By(i)];
AB(3).XData = [Bx(i) Cx];
AB(3).YData = [By(i) Cy];
ABP(1).XData = [Ax(i) Px(i)];
ABP(1).YData = [Ay(i) Py(i)];
ABP(2).XData = [Bx(i) Px(i)];
ABP(2).YData = [By(i) Py(i)];
drawnow
end
その他の回答 (0 件)
参考
カテゴリ
Help Center および File Exchange で Animation についてさらに検索
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!