Is it possible to create this colormap and corresponding colorbar in Matlab?

6 ビュー (過去 30 日間)
BN
BN 2020 年 5 月 6 日
コメント済み: BN 2020 年 5 月 6 日
Hello,
I want to use something like this colorbar on my figure:
Which you can see every 25 by 25 the color has changed. Now I want:
-------------------------------------------------
0-25 = #fff496
25-50 = #fcd70d
50-75= #adff2f
75-100 = #45ff2f
100-125 = #9cb63b
125-150 = #339445
150-175 = #1aa05b
175-200 = #17baa7
200-225 =#159fd0
225-250 = #2f52a4
250 - 275 = #2f449d
275-300 = #4f499f
300-325 = #7550a0
325-350 = #50376d
more than 350 = #2b1d3a
---------------------------------------------
I don't know how to set something like this. Here is my code:
S = shaperead ('country_Boundary.shp');
lon = S.X;
lat = S.Y;
plot(lon, lat, '-k')
hold on
ax = gca;
xL = ax.XLim;
yL = ax.YLim;
rect_x = [-0.25 -0.25 0.25 0.25];
rect_y = [0.25 -0.25 -0.25 0.25];
x = points{:,1};
y = points{:,2};
z = points{:,3};
colorbar
% define start and end colors Using the hex -> rgb converter from this answer: https://www.mathworks.com/matlabcentral/answers/458086-how-to-specify-line-color-using-a-hexadecimal-color-code
start_color = sscanf('00ffff','%2x%2x%2x',[1 3])/255;
end_color = sscanf('0000ff','%2x%2x%2x',[1 3])/255;
num_colors = 100;
% create a map linearly interpolating between them
% i.e. three columns interpolating from Red1 to Red2, etc.
clrs =[linspace(start_color(1),end_color(1),num_colors)' linspace(start_color(2),end_color(2),num_colors)' linspace(start_color(3),end_color(3),num_colors)'];
colormap(clrs)
zlim = [min(z) max(z)]+[-0.1 +0.1];
clr_val = @(z) clrs(ceil(interp1(zlim, [0 1], z)*num_colors), :);
for i=1:numel(x)
p(i) = patch(rect_x + x(i), rect_y + y(i), ...
clr_val(z(i)), ...
'EdgeColor', 'none');
end
ax.XLim = xL;
ax.YLim = yL;
caxis([min(z) max(z)])
I attached my data too. Thank you all.
  2 件のコメント
BN
BN 2020 年 5 月 6 日
Hi, Thank you so much for your suggestion. I download and used it. But I saw it resulted in the wrong. I replaced this part:
start_color = sscanf('00ffff','%2x%2x%2x',[1 3])/255;
end_color = sscanf('0000ff','%2x%2x%2x',[1 3])/255;
num_colors = 100;
% create a map linearly interpolating between them
% i.e. three columns interpolating from Red1 to Red2, etc.
clrs =[linspace(start_color(1),end_color(1),num_colors)' linspace(start_color(2),end_color(2),num_colors)' linspace(start_color(3),end_color(3),num_colors)'];
colormap(clrs)
By:
num_colors = 100;
% create a map linearly interpolating between them
% i.e. three columns interpolating from Red1 to Red2, etc.
mycolormap = customcolormap(linspace(0,1,15), {'#fff496','#fcd70d','#adff2f',...
'#45ff2f','#9cb63b','#339445','#1aa05b','#17baa7','#159fd0','#2f52a4',...
'#2f449d','#4f499f','#7550a0','#50376d','#2b1d3a'});
colorbar('southoutside');
colormap(mycolormap);
But the resulted figure's colormap is wrong when I check it with my table data.
Here is the complete code that I used:
S = shaperead ('country_Boundary.shp');
lon = S.X;
lat = S.Y;
plot(lon, lat, '-k')
hold on
ax = gca;
xL = ax.XLim;
yL = ax.YLim;
rect_x = [-0.25 -0.25 0.25 0.25];
rect_y = [0.25 -0.25 -0.25 0.25];
x = points{:,1};
y = points{:,2};
z = points{:,3};
% define start and end colors
start_color = sscanf('00ffff','%2x%2x%2x',[1 3])/255;
end_color = sscanf('0000ff','%2x%2x%2x',[1 3])/255;
num_colors = 100;
% create a map linearly interpolating between them
% i.e. three columns interpolating from Red1 to Red2, etc.
mycolormap = customcolormap(linspace(0,1,15), {'#fff496','#fcd70d','#adff2f','#45ff2f',...
'#9cb63b','#339445','#1aa05b','#17baa7','#159fd0','#2f52a4','#2f449d','#4f499f',...
'#7550a0','#50376d','#2b1d3a'});
colorbar('southoutside');
colormap(mycolormap);
% clrs =[linspace(start_color(1),end_color(1),num_colors)' linspace(start_color(2),end_color(2),num_colors)' linspace(start_color(3),end_color(3),num_colors)'];
% colormap(clrs)
zlim = [min(z) max(z)]+[-0.1 +0.1];
clr_val = @(z) mycolormap(ceil(interp1(zlim, [0 1], z)*num_colors), :);
for i=1:numel(x)
p(i) = patch(rect_x + x(i), rect_y + y(i), ...
clr_val(z(i)), ...
'EdgeColor', 'none');
end
ax.XLim = xL;
ax.YLim = yL;
caxis([min(z) max(z)])
axis off;
Do you know what is the problem?
Thank you

サインインしてコメントする。

採用された回答

Guillaume
Guillaume 2020 年 5 月 6 日
Note that since R2019b, you can write literal hexadecimal (and binary) numbers directly into matlab.
I don't have the mapping toolbox to test with your data, but the following seems to be what you're after:
hexmap = [
0xfff496
0xfcd70d
0xadff2f
0x45ff2f
0x9cb63b
0x339445
0x1aa05b
0x17baa7
0x159fd0
0x2f52a4
0x2f449d
0x4f499f
0x7550a0
0x50376d
0x2b1d3a]; % I used notepad++ in column mode to extract your hex values and append the 0x
cmap = im2double(reshape(typecast(hexmap, 'uint8'), 4, [])'); %convert 32-bit 00RRBBGG hexadecimal into 8-bit quadruplets (GG, RR, BB, 00) then rescale to 0:1
cmap = fliplr(cmap(:, 1:3)); %reorder into R G B triplets.
%demo image just for testing
figure; imagesc(toeplitz(0:400));
%apply colormap with correct scale and display with correct tick marks.
colormap(cmap);
caxis([0 375]); %has to be that to match your spacing
colorbar('Ticks', 0:50:350);

その他の回答 (0 件)

カテゴリ

Help Center および File ExchangeOrange についてさらに検索

タグ

製品


リリース

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by