How to set x axis using xticks?

I want to set x axis start from 0 to 24 hour using xticks, but why this code doesn't work for figure 2 and 3, it always start from 8 for axis label for fgure 2. Here the code

clear; clc; close all;

% Daily Travelling Distance PDF Car
x=(0:1:150);
y=lognpdf(x,3.14,0.88);

% Generate Daily Travelling Car
m1=30.7;
v1=17.72;
numbmob=1681;
mu1 = log((m1^2)/sqrt(v1+m1^2));
sigma1 = sqrt(log(v1/(m1^2)+1));
d1=lognrnd(mu1,sigma1,numbmob,1);

% Generate Daily Travelling motorcycle
m2=16;
v2=17.72;
numbmot=7743;
mu2 = log((m2^2)/sqrt(v2+m2^2));
sigma2 = sqrt(log(v2/(m2^2)+1));
d2=lognrnd(mu2,sigma2,numbmot,1);

% Calculate SOC Car
Dmax1=150;
Eff1=0.95;
SOC1=(1-(d1/Dmax1*Eff1))*100;

% Calculate SOC motorcycle
Dmax2=50;
Eff2=0.95;
SOC2=(1-(d2/Dmax2*Eff2))*100;

% Charging Duration Car
CapMob=24;
ChargMob=6.6;
TC1=(0.95-(SOC1/100))*(CapMob/(ChargMob*Eff1));

% Charging Duration motorcycle
CapMot=2;
ChargMot=0.55;
TC2=(0.95-(SOC2/100))*(CapMot/(ChargMot*Eff2));

%Generate Plugin Time Car
for i=1:ceil(0.9*numbmob)
TPMob1(i,1)=normrnd(9,0.9);
while TPMob1(i,1)<9 || TPMob1(i,1)>17
    TPMob1(i,1)=normrnd(9,0.9);
end
    if TPMob1(i,1)>=24
        TPMob1(i,1)=TPMob1(i,1)-24;
    end
end
for i=1:numbmob-ceil(0.9*numbmob)
    TPMob2(i,1)=normrnd(18.5,1);
    while TPMob2(i,1)<18 || TPMob2(i,1)>31
        TPMob2(i,1)=normrnd(18.5,1);
    end
        if TPMob2(i,1)>=24
        TPMob2(i,1)=TPMob2(i,1)-24;
    end
end

K1=[TPMob1;TPMob2];
TDMob=K1+TC1;

hh=0;
for h=0:0.5:23.5
    hh=hh+1;
    for i=1:length(K1)
        if K1(i,1)<=h && TDMob(i,1)>=h
           PEV1(i,hh)=2.2;
        else
           PEV1(i,hh)=0;
        end
    end
    PEVT1(1,hh)=sum(PEV1(:,hh));
end

%Generate Plugin Time motorcycle
for i=1:ceil(0.9*numbmot)
TPMot1(i,1)=normrnd(9,0.9);
while TPMot1(i,1)<9 || TPMot1(i,1)>17
    TPMot1(i,1)=normrnd(9,0.9);
end
if TPMot1(i,1)>=24
        TPMot1(i,1)=TPMot1(i,1)-24;
    end
end
for i=1:numbmot-ceil(0.9*numbmot)
    TPMot2(i,1)=normrnd(18,5.1);
    while TPMot2(i,1)<18 || TPMot2(i,1)>31
        TPMot2(i,1)=normrnd(18,5.1);
    end
    if TPMot2(i,1)>=24
        TPMot2(i,1)=TPMot2(i,1)-24;
    end
end

K2=[TPMot1;TPMot2];
TDMot=K2+TC2;

hh=0;
for h=0:0.5:23.5
    hh=hh+1;
    for i=1:length(K2)
        if K2(i,1)<=h && TDMot(i,1)>=h
           PEV2(i,hh)=0.5;
        else
           PEV2(i,hh)=0;
        end
    end
    PEVT2(1,hh)=sum(PEV2(:,hh));
end

PEVTotal=PEVT1+PEVT2;
T=([0:0.5:23.5]);

figure(1)
plot(x,y)
xticks([0:20:150])
title('Daily Travel Distance')
xlabel('Distance (km)') 
ylabel('Probabilitas') 
figure(2)
scatter(K1,SOC1,'*')
xticks([0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23])
yticks('auto')
title('Car Plug in Time')
xlabel('Hour') 
ylabel('SOC')
figure(3)
scatter(K2,SOC2,'*')
xticks([0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23])
yticks('auto')
title('Motor Cycle Plug in Time')
xlabel('Hour') 
ylabel('SOC')
figure(4)
plot(T,PEVT1)
title('Load Profile EV Car')
xlabel('Hour') 
ylabel('Load (KW)')
figure(5)
plot(T,PEVT2)
title('Load Profile EV Motorcycle')
xlabel('Hour') 
ylabel('Load (KW)')
figure(6)
plot(T,PEVTotal)
title('Load Profile EV')
xlabel('Hour') 
ylabel('Load (KW)')

Thanks for your help.

Answer 1

[edward holt]

xlim([0 24])

Sets the limits of the axis to run from 0 - 24

xticks([]) governs where there are tick marks.