Signal Propagation in switch port

Hi

I am using Matlab R2009b. I am trying to take all the signal names from the particular subsytem. I set the signal propagation as "on". The Mux which is connected to the subsytem which gives all the input signals but if the mux present inside the subsytem, then i am not able to receive the signal names outside of the subsytem.Because the mux signals are connected to switch port. Please let me know if you have any solution to get all the signal names.

Regards Moorthy Ka

[Yash]

there must be a problem in the inside one

[Kaustubha Govind]

Could you attach a snapshot to explain the problem a little better? See Where can I upload images and files for use on MATLAB Answers?

Answer 1

[Ryan G]

This sounds like you are using a mux like a bus, which doesn't always work as intended. See here.

Ideally you should use a bus creator block instead as this will allow you to better manage your signals.

[Moorthy]

Thanks. I got it.