0 投票

Hallo! I have this table wich consists of two columns one singe(AlplaParameter) and one double(ConfidenceInt)
I used this command in order export the table as figure
uitable('Data',T{:,:},'ColumnName',T.Properties.VariableNames,'RowName',T.Properties.RowNames,'Units', 'Normalized', 'Position',[0, 0, 1, 1]);
Unfortunatelly, the second column is transformed to two single columns leaving the column name empty. Here is a picture that illustates the problem:
How can I merge the title cells of 2nd and 3rd column?

サインインしてこの質問に回答する。

 採用された回答

Walter Roberson
Walter Roberson 2018 年 1 月 16 日

1 投票

That is not possible with uitable.
  • You can set the Data to a numeric array, in which case each array element will be made into a separate entry, same as if you had set the data to num2cell() of the numeric array
  • You can set the Data to a cell array. Each entry in the cell array must be either a numeric scalar or a logical scalar or a string() scalar or a character (row) vector. It is not possible to set an entry to be a 1 x 2 numeric array.
The closest you could get to this is to convert the entries for the dual column into character, such as
data = [num2cell(YourTable.AlpaParameter), cellstr(num2str(YourTable.ConfidenceInt))];
uitable(...', 'Data', data)

6 件のコメント
4 件の古いコメントを表示 4 件の古いコメントを非表示

Panos Ale
Panos Ale 2018 年 1 月 16 日
Thanks! It works!Is it also possible to clarify to my how can I place the contents of each column to center of it? They are are the right edge of the column and this makes it confusing!
Walter Roberson
Walter Roberson 2018 年 1 月 17 日
data1 = num2cell(YourTable.AlpaParameter);
data2 = sprintfc('<HTML><table border=0 width=150><td><CENTER>%10.4f %10.4f', YourTable.ConfidenceInt);
data = [data1, data2];
Note: adjust the 150 as appropriate for the width of your cell.
Note: the undocumented sprintfc uses the format items along rows, which is unlike fprintf and sprintf, both of which use format items along columns
Panos Ale
Panos Ale 2018 年 1 月 17 日
Thank you very much!!This is excactly what I needed!!But is seems that I need to increase the interval intervals between the valiables of the second column because they seem to be unseparated!
Walter Roberson
Walter Roberson 2018 年 1 月 17 日
I used data values in about the same range as what you had posted and the values looked separated enough to me, perhaps more than was needed. The main issue I encountered was that when I constructed the uitable I did not specify the width of the columns so most of the second column got cut off with the default column size.
Panos Ale
Panos Ale 2018 年 1 月 17 日
編集済み: Panos Ale 2018 年 1 月 17 日
Thanks you again for your response! This image illustrates the problem I am talking about:
Is there a way to solve this problem? Or maybe another way to create a table figure?
Walter Roberson
Walter Roberson 2018 年 1 月 17 日
Is it possible that you changed the font for the uitable to something that is proportionally spaced?
The code I gave,
data2 = sprintfc('<HTML><table border=0 width=150><td><CENTER>%10.4f %10.4f', YourTable.ConfidenceInt);
puts spaces in in the middle, both by the blanks and because the %10.4f format is larger than is needed for that data. Did you possibly change that code?

サインインしてコメントする。

その他の回答 (1 件)

Panos Ale
Panos Ale 2018 年 1 月 17 日

0 投票

No, I just copied and pasted your code (changing of course the YourTable part). The blanks between the %10.4f do not effect the table format as I see after increasing or decreasing them. Is there another way(with code) to insert the blanks? May this problem be because I am using matlab 2015?

3 件のコメント
1 件の古いコメントを表示 1 件の古いコメントを非表示

Panos Ale
Panos Ale 2018 年 1 月 17 日
Alternatively, in order to bypass the problem, I could just use your first code:
data = [num2cell(YourTable.AlpaParameter), cellstr(num2str(YourTable.ConfidenceInt))];
uitable(...', 'Data', data)
and place the data in column 1 to the left side of the grid. Is it possible?
Walter Roberson
Walter Roberson 2018 年 1 月 17 日
Very odd... The spacing does show up if the ColumnWidth has been left 'auto' and you have not changed the width by attempting to drag it. Unfortunately in that combination, the second column is cut off because 'auto' is not wide enough to hold all of the information. As soon as you change the width of the second column, the spacing disappears!
I do not understand at the moment why this is happening. It will require more exploration.
Panos Ale
Panos Ale 2018 年 1 月 17 日
Anyway! Thank you very much for your concern , all your respones were very helpful!

サインインしてコメントする。

カテゴリ

ヘルプ センター および File Exchange で Creating, Deleting, and Querying Graphics Objects についてさらに検索

タグ

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by