Setup BuildDirSuffix based on rtwoptions

Hi,

I would like to change the BuildDirSuffix based on rtwoptions

rtwoptions(myoption).prompt  = 'Version';
rtwoptions(myoption).type    = 'Popup';
rtwoptions(myoption).default = '1';
rtwoptions().popupstrings    = '1|2|3';

The option should be used to define the BuildDirSuffix

rtwgensettings.BuildDirSuffix = '_mytarget' + rtwoptions(myoption).value + '_rtw';

Is this possible? Thank you for your help.

Olaf

Answer 1

[Shivang Menon]

Yes, there is a way to do this. You can set the tlcvariable field for the rtwoptions parameter. This field is basically the parameter that appears in the config set (and you get the parameter value by passing this field). To set the BuildSuffixDir, get the active config set and get the value of the required parameter. Refer to code below:

rtwoptions(myoption).prompt  = 'Version';
rtwoptions(myoption).type    = 'Popup';
rtwoptions(myoption).default = '1';
rtwoptions(myoption).popupstrings    = '1|2|3';
rtwoptions(myoption).tlcvariable  = 'versionValue';

%----------------------------------------%
% Configure RTW code generation settings %
%----------------------------------------%
cs = getActiveConfigSet(gcs);
tmp = cs.get_param('versionValue');
rtwgensettings.BuildDirSuffix = ['_mytarget' tmp '_rtw'];
rtwgensettings.Version = '1';

I believe making the above changes in tlc should fix your issue. Refer to this MATLAB Answer with a similar problem:- https://www.mathworks.com/matlabcentral/answers/98859-how-can-i-change-the-code-generation-directory-depending-on-my-selection-of-the-system-target-file-i

Also, you can also try using TLC Options parameter in configuration parameters - TLC Options

Hope this helps!

Answer 2

[Olaf Oelsner]

That worked!

Thank you!