extract 3D surface from 3D volume data

82 ビュー (過去 30 日間)
RNTL
RNTL 2012 年 2 月 2 日
コメント済み: Sumayyah Alhydary 2021 年 4 月 24 日
Hi, I have a volumetric data (in the form of (x,y,z,val(x,y,z)) array of data on and within a 3D volume shape. I would like to take only the coordinates and value on the surface.
Does anyone have an idea ?

回答 (4 件)

Sean de Wolski
Sean de Wolski 2012 年 2 月 2 日
It sounds like you may want to create an isosurface (a volumetric contour map).
doc isosurface
  4 件のコメント
RNTL
RNTL 2012 年 2 月 10 日
Hi,
unfortunately its more complicated than that. I could use it if the shape was surrounded by a closed curve (in 2D plane). but its not the case.

サインインしてコメントする。


YADOLAH GANJKHANLOU
YADOLAH GANJKHANLOU 2020 年 6 月 3 日
if you voxilize the object then yes it is very easy
you can run following code to see how it work:
load('spiralVol.mat');
h = volshow(spiralVol);
B = bwperim(spiralVol);
figure
h = volshow(B);
to voxilize your volume:
Just make a zeros matrix V with your volume's dimention and then make the voxels with x,y,z of your shape to be equal to 1.
you can reverese the above algoritm to extract X,Y,Z of the surface of you volume.
Yadi
  1 件のコメント
Sumayyah Alhydary
Sumayyah Alhydary 2021 年 4 月 24 日
This worked for me! Thanks so much

サインインしてコメントする。


Bjorn Gustavsson
Bjorn Gustavsson 2012 年 2 月 2 日
Algorithm in steps:
  1. Extract the surface elements in x y z and val
Done! Since we cant know how you define the surface, the shape of the surface or any other facts about it except that it is a surface in 3-D it is not easy for us to give you more than that. If you want to display it you might get somewhere with:
T = delaunay3(X,Y,Z,{'Qt', 'Qbb', 'Qc', 'Qz'} ); and then something like tetramesh
HTH
  3 件のコメント
Josiah Yoder
Josiah Yoder 2017 年 1 月 27 日
I have the same question as the asker. To answer Bjorn's question, Suppose I pick any threshold, say 0.5, how can I find the surface where the volume = 0.5?

サインインしてコメントする。


Kevin Moerman
Kevin Moerman 2012 年 2 月 10 日
Could you rephrase/clarify your question? It sounds like you have 3D image data and that you are only interested in a certain surface within this volume.
Do you have intensity data x,y,z,val for a cloud of points or is that an image? And do I understand it correctly that you have coordinates that you know lie on the surface? Like x_s,y_x,z_s? And that you want to find the intensities on the surface points e.g. val_s? This can be achieved through interpolation (e.g. griddata3 or TriScatterInterp). If you want an actual description of the surface like patch data (faces and vertices) for plotting of the possibly closed shape (you don’t need this for determination of val_s on these points) then its more complex. Then you have point cloud onto which you want to draw a surface. You could try the cart2sph approach you suggested but this will produce possible artefacts at the poles and will lead to non-unique solutions at locations with double solutions in the spherical coordinate system (multiple radii solutions for a given angular coordinate set). There’s a number of quick and dirty approaches to getting the surface: 1) Just use the convex hull 2) Do a Delaunay tessellation (the outer surface elements now describe the convex hull again) but delete tetrahedrons which contain edged which are too long (i.e. these might be bridging the gaps that you do not want bridged). Then find the outer triangles to find your surface. This only works if you have a nice even point spacing. Good luck.
Kevin
  2 件のコメント
GS89
GS89 2017 年 4 月 3 日
Did anyone figure out how this can be done?

サインインしてコメントする。

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by