About HDL CODER and simulink
1 回表示 (過去 30 日間)
古いコメントを表示
I am doing modelling of DC motor using basic blocks in MATLAB 2015. after modelling i tried to convert this simulink file to VHDL code using HDL coder but it giving error stating that integrator blocks cannot be converted and model contains some algebraic blocks which is also not possible to convert to VHDL code. I have attached my simulink model and M file. Please help me in solving this problem.
Thank you in advance
1 件のコメント
Walter Roberson
2016 年 3 月 30 日
You need to delete the lines
clear all;
clc;close all
You might be having other difficulty as well.
回答 (1 件)
Tim McBrayer
2016 年 3 月 30 日
編集済み: Tim McBrayer
2016 年 3 月 30 日
HDL Coder does not work with blocks that require continuous time. This makes sense, as the targeted hardware operates in discrete time, controlled via clocks. So, you can not use the Continuous Integrator block as the error message says. The same logic holds for your use of the (continuous time) Transfer Function blocks. The HDL code generation report explicitly calls out all the unsupported blocks to you.
You need to replace your usage of these continuous time blocks with their discrete time counterparts; namely, the Discrete Time Integrator and the Discrete Transfer Function blocks.
You will also need to remodel your use of the unsupported Step blocks. Decide if these are part of the model or part of the testbench, and locate them accordingly. If they are part of the design they could be remodeled with a constant and a Delay block. The Scope block will be ignored by HDL Coder, but it should be pulled out of the design and into a test bench.
After all this, you may need to work with the data types. Your entire model currently uses MATLAB's default double data type, which in general is not supported for HDL synthesis. HDL Coder can generate code using doubles; you just won't be able to realize the design on a FPGA. You will need to understand your design's numeric accuracy requirements and convert it to use fixed point types. The Simulink Fixed-Point Tool can help you with this conversion.
1 件のコメント
参考
製品
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!