Looking for a Simulink model of a Series HEV that I can use as the basis for implementing and testing my optimization algorithm.

Currently, I am working on my final project which focuses on the optimization of energy storage sizing in Hybrid Electric Vehicles (HEV) using Genetic Algorithms. As part of this research, I am looking for a Simulink model of a Series HEV that I can use as the basis for implementing and testing my optimization algorithm.

I recently read an article titled "Evaluating Plug-in Series Hybrid Designs for Postal Delivery Vehicles" and found the Simulink model described there very relevant and insightful. I am reaching out to kindly ask if anyone is familiar with this model or has access to a similar Simulink model for a Series HEV that could be shared for academic and non-commercial purposes.

Any references, shared models, or guidance would be deeply appreciated.

Thank you very much in advance!

Answer 1

[Aabha]

Hi @Nico,

There is an example model in Simscape, which was introduced by MathWorks and is compatible with MATLAB R2023b and later versions. The example shows how to model a power-split hybrid electric vehicle (HEV) with a simple rule-based controller for speed tracking simulation. The power-split HEV is a series-parallel hybrid system. Please refer to the below link for more details about this example:

https://www.mathworks.com/help/releases/r2023b/sps/ug/hybrid-electric-vehicle-model.html

Additionally, there is a model in file-exchange that models a parallel-series hybrid-electric vehicle. Please refer to the below link for more details about the model:

https://www.mathworks.com/matlabcentral/fileexchange/28441-hybrid-electric-vehicle-model-in-simulink

You can refer to any of the above models and modify it as per your requirements to model a series HEV.

I hope this helps.

[Nico]

the model you offer is Series-Parallel, the vehicle model i want is pure series HEV, so the vehicle runs only by motor, and the motor supprted by 2 Energy storage (battery and engine ICE)

Answer 2

[Kothuri]

Hi Nico,

You can refer the below examples on Series Hybrid Electric Vehicle and adapt the Series HEV model as per your application.

• Hybrid-Electric Vehicle Model in Simulink: https://www.mathworks.com/matlabcentral/fileexchange/28441-hybrid-electric-vehicle-model-in-simulink
• IPMSM Torque Control in a Series HEV: https://www.mathworks.com/help/sps/ug/ipmsm-torque-control-in-a-series-hev.html?searchHighlight=series+HEV&s_tid=srchtitle_support_results_1_series+HEV

[Nico]

the model you offer is Series-Parallel, the vehicle model i want is pure series HEV, so the vehicle runs only by motor, and the motor supprted by 2 Energy storage (battery and engine ICE)

Answer 3

[Vincent Hu]

You can try this one: Extended Range Dual-Motor Electric Vehicle Model - File Exchange - MATLAB Central.