Name a dataset that will be used in Simulink
3 ビュー (過去 30 日間)
古いコメントを表示
How do I name a dataset. My dataset is available in Simulink; however, it is identified as unnamed. I want to use multiple datasets so I need to be able to identify each of them separately.
clc
% Parameters
f0 = 60; % Fundamental frequency in Hz
sampling_rate = 120000; % Sampling rate in Hz
stopTime = 0.1; % Duration of the signal in seconds
t = 0:1/sampling_rate:stopTime; % Time vector
% Harmonic amplitudes (example values)
IA = [771.32, 0.24,1.36, 0.96, 6.64, 0.16, 2.36, 0, 0.48,...
0.16, 1.84, 0.08, 0.56, 0.08, 0.32, 0.08, 0.24,...
0.08, 0.08, 0.08, 0.08, 0, 0.48, 0, 0.16, 0.08, 0.08, 0, 0.08, 0, 0, 0, 0,...
0.08, 0.24, 0.16, 0.32, 0.08, 0.08, 0.08, 0.32,...
0.08, 0.24, 0.16, 0.24, 0.08, 0.8, 0.16, 0.48,...
0.16, 0.16, 0.08, 0.72, 0.24, 0.72, 0.16, 0.24,...
0.08, 0.16, 0.08, 0.56, 0.08, 0.32]'; % Amplitudes for the 1st, 2nd, and 3rd harmonics
IB = [773.44, 0.4, 0.72, 0.88, 6.16, 0.4, 2.84, 0.08, 0.4, 0.08,...
1.76, 0.08, 0.96, 0.08, 0.16, 0, 0.4, 0.08, ...
0.24, 0.08, 0, 0, 0.4, 0, 0.24, 0,...
0.08, 0, 0.08, 0, 0.08, 0, 0.16, 0.08,...
0.16, 0.08, 0.32, 0.08, 0.08, 0, 0.24, 0.08,...
0.4, 0.08, 0.08, 0.08, 0.8, 0.08, 0.72, 0.16,...
0.08, 0.32, 0.48, 0, 0.08, 0.08, 0.24, 0.32,...
0.24, 0.24, 0.72, 0.24, 0.08];
IC = [775.76, 0.24, 0.56, 0.72, 6.48, 0.24, 2.44, 0.08, 0.08, 0.08, ...
2.12, 0, 0.72, 0.08, 0.16, 0.08,...
0.32, 0, 0.08, 0, 0, 0, 0.56, 0, 0.08, 0, 0.08, 0, ...
0, 0, 0.08, 0, 0, 0, 0.24, 0, 0.24, 0, 0, 0.08, 0.24, 0, 0.32, 0,...
0.08, 0.08, 0.8, 0.08, 0.56, 0.08, 0.32, 0.08,...
0.64, 0.32, 0.56, 0.08, 0.24, 0.32, 0.24, 0.32, 0.72, 0.16, 0.24];
%% Generate the current
currentIA = zeros(size(t));
currentIB = zeros(size(t));
currentIC = zeros(size(t));
for n = 1:length(IA)
amplitudeIA = IA(n);
currentIA = currentIA + amplitudeIA * cos(2 * pi * n * f0 * t);
amplitudeIB = IB(n);
currentIB = currentIB + amplitudeIB * cos(2 * pi * n * f0 * t + 2*pi/3);
amplitudeIC = IC(n);
currentIC = currentIC + amplitudeIC * cos(2 * pi * n * f0 * t - 2*pi/3);
end
currents = timeseries([currentIA; currentIB; currentIC]', t);
dataset = Simulink.SimulationData.Dataset(currents); %How do I give the dataset a name?
save currentsWith63Harmonics.mat dataset
%% Plot the signal
figure(1);
plot(t, currentIA);
hold on
plot(t, currentIB);
plot(t, currentIC);
title('Three-Phase currents with 63 harmonics');
xlabel('Time (s)');
ylabel('A');
grid on;
figure(2);
ee_calculateThdPercent(1:1:63,IA')
bar(1:1:63,IA')
clear IA IB IC f0 duration amplitudeIA amplitudeIB amplitudeIC
clear n t signal
0 件のコメント
採用された回答
Paul
2024 年 7 月 15 日
Hi David,
The 'unnamed' in that block is the name of the signal, not the dataset.
f0 = 60; % Fundamental frequency in Hz
sampling_rate = 120000; % Sampling rate in Hz
stopTime = 0.1; % Duration of the signal in seconds
t = 0:1/sampling_rate:stopTime; % Time vector
% Harmonic amplitudes (example values)
IA = [771.32, 0.24,1.36, 0.96, 6.64, 0.16, 2.36, 0, 0.48,...
0.16, 1.84, 0.08, 0.56, 0.08, 0.32, 0.08, 0.24,...
0.08, 0.08, 0.08, 0.08, 0, 0.48, 0, 0.16, 0.08, 0.08, 0, 0.08, 0, 0, 0, 0,...
0.08, 0.24, 0.16, 0.32, 0.08, 0.08, 0.08, 0.32,...
0.08, 0.24, 0.16, 0.24, 0.08, 0.8, 0.16, 0.48,...
0.16, 0.16, 0.08, 0.72, 0.24, 0.72, 0.16, 0.24,...
0.08, 0.16, 0.08, 0.56, 0.08, 0.32]'; % Amplitudes for the 1st, 2nd, and 3rd harmonics
IB = [773.44, 0.4, 0.72, 0.88, 6.16, 0.4, 2.84, 0.08, 0.4, 0.08,...
1.76, 0.08, 0.96, 0.08, 0.16, 0, 0.4, 0.08, ...
0.24, 0.08, 0, 0, 0.4, 0, 0.24, 0,...
0.08, 0, 0.08, 0, 0.08, 0, 0.16, 0.08,...
0.16, 0.08, 0.32, 0.08, 0.08, 0, 0.24, 0.08,...
0.4, 0.08, 0.08, 0.08, 0.8, 0.08, 0.72, 0.16,...
0.08, 0.32, 0.48, 0, 0.08, 0.08, 0.24, 0.32,...
0.24, 0.24, 0.72, 0.24, 0.08];
IC = [775.76, 0.24, 0.56, 0.72, 6.48, 0.24, 2.44, 0.08, 0.08, 0.08, ...
2.12, 0, 0.72, 0.08, 0.16, 0.08,...
0.32, 0, 0.08, 0, 0, 0, 0.56, 0, 0.08, 0, 0.08, 0, ...
0, 0, 0.08, 0, 0, 0, 0.24, 0, 0.24, 0, 0, 0.08, 0.24, 0, 0.32, 0,...
0.08, 0.08, 0.8, 0.08, 0.56, 0.08, 0.32, 0.08,...
0.64, 0.32, 0.56, 0.08, 0.24, 0.32, 0.24, 0.32, 0.72, 0.16, 0.24];
%% Generate the current
currentIA = zeros(size(t));
currentIB = zeros(size(t));
currentIC = zeros(size(t));
for n = 1:length(IA)
amplitudeIA = IA(n);
currentIA = currentIA + amplitudeIA * cos(2 * pi * n * f0 * t);
amplitudeIB = IB(n);
currentIB = currentIB + amplitudeIB * cos(2 * pi * n * f0 * t + 2*pi/3);
amplitudeIC = IC(n);
currentIC = currentIC + amplitudeIC * cos(2 * pi * n * f0 * t - 2*pi/3);
end
currents = timeseries([currentIA; currentIB; currentIC]', t);
dataset = Simulink.SimulationData.Dataset(currents); %How do I give the dataset a name?
Looking at dataset
dataset
we see that it does have a name 'currents', which I guess it was given automatically based in the variable name in its constructor. The dataset name can be changed if you want. But the issue you're seeing is that the signal inside the dataset is unnamed. You can change that when currents is created
currents = timeseries([currentIA; currentIB; currentIC]', t,'Name','allcurrents');
dataset = Simulink.SimulationData.Dataset(currents)
Now the outuput from the Signal Editor block will be 'allcurrents'.
You can also operate on dataset directly to assign a name to that signal.
dataset{1}.Name = 'thecurrents'
その他の回答 (0 件)
参考
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!