DAQ 에 대한 질문

안녕하십니까 저는 MATLAB 을 이용하는 학생입니다 이것은 저의문제가아니고 저의 친구의 문제인데 친구가 DAQ 를 이용을해서 ANALOG INPUT RECORDER 를 시행을 시키려고합니다 일반적인성공에 대해서는 그래프와 유동치는 그래프가 나와야 정상이지만 저의 친구같은경우는 DAQ 를 연결을 하고 정상적으로 진행을 했음에도

Getting Started

To access your device, use the following steps:

1. Make sure your device is connected to your computer.
2. Click Manage Add-Ons to verify that you have the support package installed for your device vendor.
3. If you need to install a support package, click Get Hardware Support Packages.
4. If your device does not appear in the Device List, click Refresh.

그래프가아닌 위에처럼 시작절차문이 나오게됩니다 위에것은 연결을 시키지않고 나오는경우인데 이것이 어떤 경우에 뜨게되면 위를 해결하기위해서 어떤앱이나 어떤 프로그램 조치를 취해야하는 지 저는 모르겠습니다 부디 이 해결책을 알려주시기바랍니다 PLEASE TRANSLATE IF YOU ARE NOT KOREAN . I PLEASED IF YOU RESOLVE MY HAPPENING

Answer 1

[Divit]

Hi Hong Jihun,

Here are a few troubleshooting steps you can try that might resolve your issue:

• Check if your device is supported by the "Data Acquisition Toolbox" of MATLAB. You may refer to the following documentation for more details: https://www.mathworks.com/help/daq/install-hardware-support-package-for-vendor-support.html.
• Make connections to your device and run the commands "daq.getVendors" and "daq.getDevices" to check whether you can see your device listed correctly.
• You will need to install the support package specific to your vendor and device. Ensure that you install the required hardware support package from the Add-Ons library.
• Start the "Analog Input Recorder," and you should be able to see your devices and the graphs.