- read the data from csv (using readcsv?) as readArr
- copy and paste the data as pastedArr
- Diff them find(readArr~=pastedArr)
getting different results with excel data
2 ビュー (過去 30 日間)
古いコメントを表示
Hello, I am fairly new to MATLAB, here is my issue:
I have frequency domain data I wish to perform an IFFT on in order to recover the waveform in the time domain.
The original data is an FFT data captured by test equipment. It is in an excel spreadsheet, stored in .csv format.
When I import the .csv data into my MATLAB code and perform the IFFT, I get a waveform that is not correct.
However, when I manually copy the exact data from the .csv and paste it into an array in the MATLAB source file, and run the same IFFT, the resulting time domain waveform is correct.
I have had this issue with several different waveforms/files.
I am confident the results of the second approach (manually copying data to array into MATLAB source) is correct because in each case I know what the origial time domain is.
Any help is greatly appreciated,
THANKS!!!!
0 件のコメント
回答 (4 件)
Yongjian Feng
2021 年 11 月 21 日
Without a sample file, it is difficult to investigate the problem for you. You might need to do this yourself:
2 件のコメント
Yongjian Feng
2021 年 11 月 22 日
Great.
Accept an answer if it helps you. Then others with the same question know how to handle it.
Thanks.
Image Analyst
2021 年 11 月 21 日
Does the data have both the positive and negative frequencies? And did you make sure the zero frequency (DC) component was at element 1 and the negative freq's are basically mirrored so that the right side of the spectrum looks similar to the left half?
Unfortunately you forgot to attach your data file. Attach it if you want people to help you with your actual data.
0 件のコメント
Lou Gnerre
2021 年 11 月 22 日
1 件のコメント
Image Analyst
2021 年 11 月 23 日
I don't understand this data. What does column 1 and column 2 of the file represent? They both just seem like random numbers. I mean the x (if that's the first column) is not even sorted:
% Demo by Image Analyst
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
clear; % Erase all existing variables. Or clearvars if you want.
workspace; % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 22;
data = readmatrix('MYDATAcart.txt');
x = data(:, 1);
y = data(:, 2);
plot(x, y, 'b-', 'LineWidth', 2);
grid on
title('Frequency Spectrum', 'FontSize', fontSize);
xlabel('Frequency', 'FontSize', fontSize);
ylabel('Fourier Signal Value', 'FontSize', fontSize);
Lou Gnerre
2021 年 11 月 22 日
編集済み: Image Analyst
2021 年 11 月 23 日
2 件のコメント
Yashika Chauhan
2022 年 11 月 27 日
can you please share the matlab code for converting the csv data into ifft
参考
カテゴリ
Help Center および File Exchange で Data Import and Analysis についてさらに検索
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!