Sensors
Configure sensors connected to Texas Instruments®
C2000™ microcontrollers
Configure the sensor blocks to read data from IMU and environmental sensors.
Blocks
BMI160 | Measure linear acceleration, angular rate, and temperature from BMI160 sensor (Since R2021b) |
BMM150 | Measure magnetic field from BMM150 sensor (Since R2021b) |
BME280 | Measure barometric air pressure, relative humidity, and temperature from BME280 sensor (Since R2021b) |
ADXL34x Accelerometer | Measure linear acceleration along axes of ADXL34x family of accelerometers (Since R2022a) |
LIS3DH Accelerometer Sensor | Measure linear acceleration, voltage, and temperature from LIS3DH sensor (Since R2022b) |
BMP280 Pressure Sensor | Measure barometric air pressure and ambient temperature from BMP280 sensor (Since R2022b) |
Model Settings
Troubleshooting
Workaround to Reset Interrupt Pin of Sensors Supporting Latched Interrupts
This topic helps you with the workaround for interrupt workflow in sensors.
External Interrupt Workflow for Texas Instruments C2000 Processors
This topic helps you with the workflow for external interrupts.