Discrete variable inductor
Simscape / Electrical / Specialized Power Systems / Passives
The Variable Inductor block represents a linear time-varying inductor. It implements a discrete variable inductor as a current source. The impedance is specified by the Simulink® input signal. The inductance value can be negative.
When you use a Variable Inductor block in your model, set the
powergui block Simulation type to
Discrete and select the Automatically handle
Discrete solver and Advanced tab solver settings of blocks parameter in
the Preferences tab. The robust discrete solver is used to
discretize the electrical model. Simulink signals an error if the robust discrete solver is not used.
The block uses the following equations for the relationship between the voltage, v, across the device and the current through the inductor, i. The block input specifies the value of the inductance. The flux linkage of the inductor is equal to the specified inductance multiplied by the inductor current:
L — Inductance
Input port associated with the inductance. The inductance can be negative and must be finite.
+ — Positive terminal
Specialized electrical conserving port associated with the inductor positive voltage.
- — Negative terminal
Specialized electrical conserving port associated with the inductor negative voltage.
Discrete Solver — Solver type
Backward Euler (default) |
Robust integration method used by the block. The discrete solver method is automatically
Trapezoidal when, in the
powergui block, in the Preferences
settings, you select Automatically handle discrete solver and
Advanced tab solver settings of blocks.
Trapezoidal robust solver is slightly more
accurate than the
Backward Euler robust solver,
especially when the model is simulated at larger sample times. The
Trapezoidal robust solver may produce slight
damped numerical oscillations on machine voltage in no-load conditions,
Backward Euler robust solver prevents
oscillations and maintains good accuracy.
Minimal inductance absolute value (H) — Minimal inductance
1e-6 (default) | nonnegative scalar
Lower limit on the absolute value of the signal at port L. This limit prevents the signal from reaching a value that has no physical meaning. The value of this parameter must be greater than 0.
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Introduced in R2019b