rfckt.delay

Delay line

Description

Use the delay class to represent delay lines that are characterized by line loss and time delay.

Creation

Syntax

h = rfckt.delay

h = rfckt.delay(Name,Value)

Description

h = rfckt.delay returns a delay line object whose properties are set to their default values.

h = rfckt.delay(Name,Value) sets properties using one or more name-value pairs. For example, rfckt.delay('Loss',2)creates an RF delay line with a line loss of 2 dB. You can specify multiple name-value pairs. Enclose each property name in a quote. Properties not specified retain their default values.

Properties

AnalyzedResult — Computed S-parameters, noise figure, OIP3, and group delay values

Read-only: rfdata.data object

This property is read-only.

Computed S-parameters, noise figure, OIP3, and group delay values, specified as a rfdata.data object. For more information refer, Algorithms.

Data Types: function_handle

'Loss' — Line loss value

0 | positive scalar in dB

Line loss value, specified as a positive scalar in dB. Line loss is the reduction in strength of the signal as it travels over the delay line.

Data Types: double

Name — Object name

Read-only: 1-by-N character array

This property is read-only.

Object name, specified as a 1-by-N character array.

Data Types: char

nport — Number of ports

Read-only: 2 | positive integer

This property is read-only.

Number of ports, specified as a positive integer.

Data Types: double

'TimeDelay' — Amount of time delay

1.0000e-012 | scalar in seconds

Amount of time delay introduced in the line, specified as a scalar in seconds.

Data Types: double

'Z0' — Characteristic impedance

50 | scalar in ohms

Characteristic impedance of the delay line, specified as a scalar in ohms.

Data Types: double

Object Functions

analyze	Analyze RFCKT object in frequency domain
calculate	Calculate specified parameters for rfckt objects or rfdata objects
circle	Draw circles on Smith Chart
extract	Extract specified network parameters from rfckt object or data object
listformat	List valid formats for specified circuit object parameter
listparam	List valid parameters for specified circuit object
loglog	Plot specified circuit object parameters using log-log scale
plot	Plot circuit object parameters on X-Y plane
plotyy	Plot parameters of RF circuit or RF data on xy-plane with two Y-axes
getop	Display operating conditions
polar	Plot specified object parameters on polar coordinates
semilogx	Plot RF circuit object parameters using log scale for x-axis
semilogy	Plot RF circuit object parameters using log scale for y-axis
smith	Plot circuit object parameters on Smith Chart
write	Write RF data from circuit or data object to file
getz0	Calculate characteristic impedance of RFCKT transmission line object
read	Read RF data from file to new or existing circuit or data object
restore	Restore data to original frequencies
getop	Display operating conditions
groupdelay	Group delay of S-parameter object or RF filter object or RF Toolbox circuit object

Examples

Represent Delay Lines

Represent delay lines that are characterized by line loss and time delay using rfckt.delay.

del=rfckt.delay('TimeDelay',1e-11)

del = 
   rfckt.delay with properties:

                Z0: 50.0000 + 0.0000i
              Loss: 0
         TimeDelay: 1.0000e-11
             nPort: 2
    AnalyzedResult: []
              Name: 'Delay Line'

Algorithms

The analyze method treats the delay line, which can be lossy or lossless, as a 2-port linear network. It computes the AnalyzedResult property of the delay line using the data stored in the rfckt.delay object properties by calculating the S-parameters for the specified frequencies. This calculation is based on the values of the delay line's loss, α, and time delay, D.

$$\{\begin{array}{c}{S}_{11}=0\\ S_{12}=e^{-p}\\ S_{21}=e^{-p}\\ S_{22}=0\end{array}$$

Above, p = α_a + iβ, where α_a is the attenuation coefficient and β is the wave number. The attenuation coefficient α_a is related to the loss, α, by

$${\alpha }_a=-\ln \left({10}^{\alpha /20}\right)$$

and the wave number β is related to the time delay, D, by

$$\beta =2\pi fD$$

where f is the frequency range specified in the analyze input argument freq.

References

[1] Ludwig, R. and P. Bretchko, RF Circuit Design: Theory and Applications, Prentice-Hall, 2000.

Version History

Introduced before R2006a