Main Content

Port

TCP/IP port number of target hardware

expand all in page

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Port parameter sets the value of the TCP/IP port number of target hardware, from 1024 to 65535. External mode uses this IP port for communication between the target hardware and host computer.

Dependencies

None

Settings

17725 (default) | 1024..65535

Set the value of the TCP/IP port number of target hardware, from 1024 to 65535.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to either:

    • AMD Zynq ZC702 evaluation kit

    • AMD Zynq ZC706 evaluation kit

    • ZedBoard

    Then, click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. If you chose AMD Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

  5. From the External mode group, select a Port number and click Apply.

  6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also

|