回答済み
how to deal with the compatibility of powergui in phasor mode and discrete mode?
Hello Yang, That block has a dc bus and the phasor mode is made explicitly for AC circuit analysis. It isn't easy to do dc sys...

4年弱前 | 0

回答済み
How can I implement the current chopping in air blast circuit breaker in Simulink?
Hello Akramul, you can do this in Simscape, specifically Simscape Electrical: https://matlabacademy.mathworks.com/#getting-sta...

4年弱前 | 0

回答済み
Connecting battery with incandescent lamp
Hello Jojo, unfortunately, this issue won't be helpful to you, as this question is old, but since it has a new comment, we'll g...

4年弱前 | 0

回答済み
How do I measure the load anglecorrectly for the following VSC configuration?
Hello Muhammad, unfortunately, if this is involved in a feedback loop, the problem could be anything in the loop and a screensh...

4年弱前 | 0

回答済み
Measure the stator phase voltage of induction motor
Hello Raymond, the simscape induction motors have both sides of the winding exposed (so you can control if they are connected w...

4年弱前 | 0

回答済み
error while simulating the model
Hello Tripura, this probablem could be coming from the mechanical model that your motor is attatched to. Setting initial condi...

4年弱前 | 0

回答済み
How to Maintain Voltage within a certain range?
The tap changing transformers can be used for this, but you have to provide the appropriate control algorithm. These examples h...

4年弱前 | 1

回答済み
Simulink model of parallel dc Motor and Compound Dc Motor
Moving Mitch's answer here as it is useful: Mitch Lautigar on 21 Apr 2022 at 14:45 I have to ask. Did you try googling these? ...

4年弱前 | 0

回答済み
Show thermal port in Converter (Three-Phase) block
Hello Riccardo, unfortunately that block doesn't have a way to expose the individual IGBT's with thermal effects. As you suspe...

4年弱前 | 1

| 採用済み

回答済み
Circuit design with a switch to charge the capacitor then upon reaching the desired charge second switch triggers to supply energy to resistor.
Hello Sarthak, the best thing to do is probably take the free trianing here for Simscape and Circuits: https://matlabacademy....

4年弱前 | 0

回答済み
want to convert rotary encoder pulses into angle for DC motor
Hello Yousif, this example has an implementation in Simulink for decoding a pulse stream. It's in the hall effect sensor subsy...

4年弱前 | 0

回答済み
What is the correct angular velocity in Simscape electrical demo "Synchronous Machine Initialization with Loadflow"?
Hello Ralph, the number of pole pairs for this machine is 10. You are seeing mechanical angular velocity, which is generating ...

4年弱前 | 0

回答済み
how to link electrical torque to a mechanical translation ,
Hello Ayoub, the main issue here is that the mechanical port from the multi-body is translational motion (forward and backward)...

4年弱前 | 0

回答済み
Simulation of Induction motor (Asynchronous Machine)
Hello Rafael, unfortunately, when you take a Torque input for that block, it intitializes to a non-zero speed and you can't for...

4年弱前 | 0

回答済み
Adding Frequency Fluctuation in Simulink Model of Battery energy storage for Frequency stabilization of Grid
Hello Manthan, I realize this question is a bit late to be useful to your post, but Aditya's comment mean that hopefully it is ...

4年弱前 | 0

回答済み
Want help regarding SPICE-Imported MOSFET
Hello Waqar, there is a command, subcircuit 2 ssc that can be used to import most SPICE models. There are some limitations how...

4年弱前 | 1

| 採用済み

回答済み
Single precision equivalent to the Electrical RMS and Mean blocks
Hello Segmentation Fault: You are correct, those blocks (in the Simscape Electrical library) are implemented intended primarily...

4年弱前 | 1

| 採用済み

回答済み
Modeling Lithium ion battery
Hello Hend, existing battery models that ship from MathWorks exist specifically in Simulink. If you want a Matlab based batter...

4年弱前 | 0

回答済み
DC TO AC inverter
Hello Ayoub, you can use the built in PWM generator to generate signals for a full-bridge configuration. It has a 4 pulse conf...

4年弱前 | 1

回答済み
link a full bridge DC/AC to an induction machine
Hello Ayoub, you are using a block specifically designed to be the arm of a multi-level converter, It is not a standard full b...

4年弱前 | 0

| 採用済み

回答済み
Difference in Boost Converter Waveforms
Hey Andy, please send me an email to jvansick@mathworks.com. Regards, Joel

4年弱前 | 0

| 採用済み

回答済み
How to modelling and measure an algorithmic potentiometer in Matlab
Hello Derek, the appropriate way to model potentiometer response is using Simscape. If you are having trouble with Simscape, I...

約4年前 | 0

回答済み
what if Stand-Alone Solar PV System with AC and DC loads with Battery Backup
Hello Alisher, you can use that as a starting place, but it doesn't have any AC power in it. Modifying it is possible, but wou...

約4年前 | 0

回答済み
my firing angle on this triac does not work correctly ?
My first guess would be that you need to double the rate of your firing. It looks like you are triggering the first thyristor c...

約4年前 | 0

回答済み
HDL Code Generation (Verilog) for a 2-D Lookup Table
Hello, you can go through examples like this for generating hdl: https://www.mathworks.com/help/hdlcoder/gs/example-generating-...

約4年前 | 0

回答済み
No me abre MATLAB
This question has been resolved by downloading the most recent version, see comments section above.

約4年前 | 0

| 採用済み

回答済み
How to rectify my AC Voltage?
it's possible your load is too large (resistance too small) and the piezoelectric device isn't powerful enough to charge it. Yo...

約4年前 | 0

回答済み
Can Matlab software simulate different grades of fuels burning in an Large Diesel Engine?
The tools could be used to create this type of simulation, but you'd have to build it from the ground up.

約4年前 | 0

回答済み
Problem with DC voltage output from Boost type converter when adding another to its output.
It looks like you are using open loop control and the first converter is supplying it's original load PLUS the new load of the s...

約4年前 | 1

回答済み
Can I cange the step size from fixed to variable after a certain simulation time?
Hello Annette, unfortunately, there is no way to do this. In general, it's best to only simulate a few cycles with the n-chann...

約4年前 | 0